When I try to copy formulas across do I get a little black plus-sign in the lower right corner of the cell, when I point to it. I can then drag the plus-sign to the the area where I want to copy the formula. This plus-sign has now disappeared.
View 3 RepliesMy boss uses the + symbol and the = symbol in his formulas eg "=+E3*E4" What is the advantage or difference in this as to just using "=E3*E4"
View 3 Replies View Relatedcreate a formula copying a formula from cell a5 to a20 but i want the result to be 1 cell lower from a5's result
View 6 Replies View RelatedI want code to move the cursor to A788
But keep A788 in the top left corner on screen.
Is there easy code to help me accomplish this?
Also, Is there code that will take you to the first cell it finds closest to today's date.
Dates are in Column B.g
Is there a way (in VBA) to position a specific cell of a worksheet in the upper left-hand corner (i.e. cell H40)?? I have some code that I'd like to have do this.
View 3 Replies View RelatedI M trying to get the lower values between to cells and have the lower valued cell highlighted,,,i have over 43 thousand lines of data to go throughand i was wondering if there was a quicker way to do this,,,for example cellA1 is $4.25 and cellA2 is $5.25 i want cell A1 to be highlighted,,is there a way?
View 2 Replies View RelatedGet a SUMIF formula to work, which it now does, but the formula puts '$' signs in the range, so that when it copies it, it does not change the range. I have got round this, by defining 12 separate ranges. But it does make the code rather long winded. Anyone know how to put the formula in without the '$' signs? There must be a way to put the formula into the first cell, and copy it across?
Set Rga = Range("b6")
Set Rgb = Range("b6").End(xlDown)
Set Rgd = Range("$e$6")
Set Rge = Range("$e$6").End(xlDown)
Set Rgc = Range(Cells(6, 2), Cells(6, 2).End(xlDown)).Offset(0, 3)
Set Rgh = Range(Cells(6, 5), Cells(6, 5).End(xlDown)).Offset(0, 3)
Set Rgi = Range(Cells(6, 5), Cells(6, 5).End(xlDown)).Offset(0, 4)
Set Rgj = Range(Cells(6, 5), Cells(6, 5).End(xlDown)).Offset(0, 5)
Set Rgk = Range(Cells(6, 5), Cells(6, 5).End(xlDown)).Offset(0, 6)
Set Rgl = Range(Cells(6, 5), Cells(6, 5).End(xlDown)).Offset(0, 7)
Set Rgm = Range(Cells(6, 5), Cells(6, 5).End(xlDown)).Offset(0, 8)
Set Rgn = Range(Cells(6, 5), Cells(6, 5).End(xlDown)).Offset(0, 9).............................
I currently have this code for counting commas in each cell in range giving me the total number of different points in the entire row. Here's the link to the original question as well.
Code:
Sub Totals()
Dim X As Long, Count As Variant
Sheets("App Communication").Select
For X = 3 To 59
Count = UBound(Split(Application.Trim(Replace(Replace(Application.Trim(Join(Application. _
Index(Cells(X, "E").Resize(, 57).Value, 1, 0), ",")), " ", "X"), ",", " ")))) + 1
Cells(X, "BJ").Value = Left(Count, CLng(Count))
Next
End Sub
Now I am looking for a way to count the number of points that have been turned blue. Some times the text in the whole cell is turned blue, others just one or two of the points is turned blue.
This seems simple...
If I let A1=8
If I fill in the cell green, either manually or with conditional formatting, and then copy and paste the cell into A2, A2 is now green with the number 8 inside.
However, if in A2 I type "=A1", A2 still has the 8 but is no longer green.
Is there a way to copy the formatting of a cell by setting it equal to the original?
When I return to a sheet by clicking on the tab of the sheet, the sheet is not immediately visible. When the sheet does become visible a cell has a black flashing background. Sometimes, but not always, the flashing cell is the activecell. Through the activate event of the sheet I attempt to make $A$1 the active cell:
View 7 Replies View RelatedI found this formula and it works great, but I need to count only items with black font. We use red font to identify lost items so don't want to count them as part of our inventory.
View 14 Replies View RelatedTrying to get spreadsheet to always open to top left corner. Though this works, a few spreadsheets will take forever to close if I make any changes and save changes to the spreadsheet
View 3 Replies View RelatedI'm trying to solve a strange problem in a piece of code.
I have a variable that is define as Double called STD. When i try to insert that variable in a formula the decimal sign (for me a comma "," because I'm Portuguese) gets converted to ";" (which is for me the separation sign for the expressions in excel formulas. ex: AND(A1>0;B1>0)=TRUE). The code is:
In a formula, what effect does putting a plus sign after an equals sign? e.g.
=+((1+B8)^12)-1. I orginally assumed that it made sure that result the would always be positive but I was wrong.
I'm working with a 100 worksheet workbook and am looking for a way to quickly copy formulas from the first worksheet I modify to some of the other worksheets (not all - every other one, actually). If the cells are A1, B1,A2,B2; I need to copy the formulas from B1,A2&B2. I can do this in 2 steps currently - copy & paste B1 and then copy and paste A2:B2.
View 2 Replies View RelatedI have a formula that references data on another spreadsheet with multiple worksheets. I have a new worksheet for each month (Jan, Feb, Mar, ...).
How can I copy formulas in series that keep the cell references the same, but change to the appropriate month. So for the forumula below, I want to fill a series down in a column to represent each month.
Right now I have to go in and edit it to change the month to the next month (i.e. change Jan to Feb.)
An example of the formula is below. In this case, I would want to fill the series down a column and have the months update in series but keep the cell reference the same.
=SUM('[New 2008 sales report linked.xls]Jan'!$M$19,'[New 2008 sales report linked.xls]Jan'!$N$19,'[New 2008 sales report linked.xls]Jan'!$Q$19,'[New 2008 sales report linked.xls]Jan'!$L$47,'[New 2008 sales report linked.xls]Jan'!$K$47,'[New 2008 sales report linked.xls]Jan'!$S$47)
I need to copy a bunch of cells that contain formulas without altering the cell references. I know I could change each formula to contain absolute cell references, then copy and paste special with formulas, but this is alot of work, and following that I'd need to change the references back again from absolute to relative in both locations. So, is there a way to quickly copy and paste formulas in multiple cells without altering the cell references?
View 2 Replies View RelatedI'm preparing an accounting model for my office use. How to solve the copying of formula to all other cells.
The detail is here:
Sheet 1:
1) I've entered a number 1000 in L2
Sheet 2:
1) I've entered a values in columns D,E,F,G
2) Calculations :
at G2 : the formula is =D2*Sheet1!L2
The problem is when I Copy the formula in G2 through G3, G4, G5........... it changes to =D3*Sheet1!L3, =D4*ValidData!L4, =D5*ValidData!L5 and so on... but it should be =D3*Sheet1!L2, =D4*ValidData!L2, =D5*ValidData!L2, so that the L2 value shall be constant for calculations in all cells.
I am trying to get a simple formula to look in A1 and if it is lower than A2 then return the value in A1 if it is not then return the value in A2..
View 4 Replies View Relatedi wanted to know if there is a way which i can so that would tell excel if a certain cell value is lower then another it would give a msg
for example
Cell A1 - 5
so if cell A2 is less then five and a macro is clicked then the macro would give a warning msg hence ending the macro
I want to have some cells with conditional formatting.
The case here is date.
I have a given range of cells which will take on date. I will select all of these and will creat conditional formatting so that if the date is less than 2 days or more, have font colour change to red.
Now, the current date will be refered on a single cell.
I have done =($C$3-2) and it works but this does not account for anything older than 2 days.
What am I missing here? How do I do or less then?
I have a spreadsheet that I am using to track competitor retail pricing
The problem is that I have a list of values and I want to be able to show how many of these values are either higher, lower or the same to a specific cell value. However one complexity that I have is that some of the competitors do not have values for all records (i.e. some are blank) and I want to discount these from the counting.
I've got a column of data that I need to split into further columns, the only way of identifying the split from the data is if a lower case character appears next to an upper case character.
For example, a cell in column A could look like;
Computer ProductsDrivesDVDExternal
And I'd need to split that out to cover columns A B and C with
Computer Products / Drives / DVDExternal
I'd need to do that for all the cells in column A.
I have a spreadsheet where column E needs to be filled with an amount depending on whether another cell in column F has either a + or - sign.
For example:
F2 has "+ ACH PreAuthorized", G2 has "322.1". I would like to have cell E2 fill in the amount "+322.1". So in cell E2, if F2 has a plus sign, then put in the amount in E2. If it has a - sign, put in the amount from G2 into E2 but put a - sign in front of the amount. If there is no sign at all, put a zero or leave blank.
if cell = null, then skip it to the lower cell.
the data is like this:
A361
A37
A38
A391
and i want to be like this:
A36
A39
without delete the row.
How do I Extract information before a sign "/" in a separate cell ?
View 2 Replies View RelatedI need to enter =+c5,+c6,+c8,+c9 thru +c105 in a cell on5 different work sheets. is there an easier way than manually typing.
View 5 Replies View RelatedI have a table that I use to generate about 20 graphs. The lower and upper limits can be manually altered in the table. If the user leave those 2 cells empty, I want the upper and lower limits be determined by default by Excel. So that the limits don't have to be entered for every graph in order for the graphs to be generated without any debugging error.
With ActiveChart.Axes(xlValue)
.MinimumScale = y1Lower
.MaximumScale = y1Upper
.MinorUnitIsAuto = True
.MajorUnitIsAuto = True
.Crosses = xlAutomatic
.ReversePlotOrder = False
.ScaleType = xlLinear
.DisplayUnit = xlNone
End With
where
y1Lower = .Cells(i, j + 9)
y1Upper = .Cells(i, j + 10)
I have a range: AC2:AG1400 that are filled with numbers....
Someone manually highlighted, in bright yellow, some of the numbers.
I need a macro that could reverse the signs of only those that are coloured in that yellow.
For Exempel
A1=B
A2=1
A3="="&A1&A2
I have even tried with concernate and indirect in A3 but no difference there...
I want A3 to return =B1 but it only returns it in text but i want it in form of a formula. Is there a formula that returns text directly into a formula or an easy way to do this?