I have a spreadsheet that I am using to track competitor retail pricing
The problem is that I have a list of values and I want to be able to show how many of these values are either higher, lower or the same to a specific cell value. However one complexity that I have is that some of the competitors do not have values for all records (i.e. some are blank) and I want to discount these from the counting.
This is a logic based macro that needs to compare values in 1 column above a specific cell and take action until the column has no more data. Here's what I'm trying to do (and I've also attached a sample of desired results):
1) I want user to input starting cell. So I need to create a button for that.
2) This is where the logic begins and I'm having difficulty.
From cell defined in button, I move up one cell in that column and compare that value to the original cell.
If the value is greater than original cell then logic needs 2 outcomes:
a) move up 1 cell in column and if that value is less than original cell, then extract that value and copy that value one cell to the right or 1c.
b) move up 1 cell in column and if that value is greater than original cell, then move up again, until find lesser value than original cell. Once we find value less than original cell, extract value and copy value one cell to the right or 1c.
I would like to compare two cells side by side and populate the higher of the two cells in one color and the lower in another
View 3 Replies View Relatedcreate a formula copying a formula from cell a5 to a20 but i want the result to be 1 cell lower from a5's result
View 6 Replies View RelatedI have a macro that needs a major improvement in performance. I have a Quad Core 2.67GHz single processor computer and with the current logic it calculates 20 values per minute. I have data sets that can be up to 400,000 data points, which means it will take 333 hours. The attached Sample file has over 9000 point. For this data set it takes 7.5 hours.
The core logic of the macro is to extract what I call “Break Point” into column M and “Time Difference” between the Break Points to column O.
I got the code from this forum (thank you DonkeyOte) and made some modifications. The modified logic does the following:
1) The user inputs the starting cell. In the Sample I use G200.
2) From cell defined in button, It moves down one cell in that column and compares that value to the original cell.
If the value is greater than original cell then there are 2 possible outcomes:
a) move down 1 cell in column and if that value is less than original cell, then extract that value and copy that value to the column M (Break Point value) and copy the Time Difference Value to column O. “Time Difference” is calculated as the difference between the 2 point breaks in Column A. In this case I’ve hardcoded 0.003472222 to get 5 minutes which matches up with each incremental time in column A, but I would like the Macro to automatically calculate that by the difference between Column A values.
b) move down 1 cell in column and if that value is greater than original cell, then move down again, until find lesser value than original cell. Once we find value less than original cell, extract value and copy value to column M and copy the Time Difference Value to column O.
Once lesser value has been copied to new cell, logic is now:
a) move down 1 cell in column and if that value is greater than original cell, then extract that value and copy that value one cell to column M and copy the Time Difference Value to column O.
b) move down 1 cell in column and if that value is less than original cell, then move up again, until find greater value than original cell. Once we find value greater than original cell, extract value and copy value one cell to column M and copy the Time Difference Value to column O.
At any point in the process if we find a value equal to the starting cell, we ignore it and the logic continues. The logic continues flip flopping like this to the last value of column G.
OR
Here's the logic now in reverse I need:
If after moving down 1 cell of original cell, the value is less than original cell then logic has the following 2 outcomes:
a) move down 1 cell in column and if that value is greater than original cell, then extract that value and copy that value one cell to column M and copy the Time Difference Value to column O..
b) move down 1 cell in column and if that value less than original cell, then move up again, until find greater value than original cell. Once we find value greater than original cell, extract value and copy value one cell to column M and copy the Time Difference Value to column O.
Once greater value has been copied to new cell, logic is now:
a) move down 1 cell in column and if that value is less than original cell, then extract that value and copy that value one cell to column M and copy the Time Difference Value to column O.
b) move down 1 cell in column and if that value is greater than original cell, then move up again, until find lesser value than original cell. Once we find value lesser than original cell, extract value and copy value one cell to column M and copy the Time Difference Value to column O.
Again, at any point in the process if we find a value equal to the starting cell, we ignore it and the logic continues. The logic continues flip flopping like this to the last value of column.
Once all the Break Points and Time Difference between Break Points are extracted for each value in column G, the AVERAGE, STDEV and MAX values of column O are calculated in column Q, R and S.
There is a loop that controls the execution of the core logic until the last value in column G. In the macro I’ve hardcoded last row being 9171, but I’d like the Macro to figure out what the last row is automatically.
I know this description is a bit long but I’ve worked for many hours on getting it work properly. I just need some help to make it run much faster. I hope someone can help me out on this. I have the right logic, just need the speed now and I really can’t figure it out.
Attached is a sample files demonstrating showing how the logic to flips back and forth as moving down the column starting in cell G200.
The sample shows the results first 4 loops (Rows 200 to 203). The values in M and O are the results of the fourth loop.
Again, assistance is very much appreciated because I've taken this as far as I can with my limited experience.
EDIT - I can embed the Macro, but it'll probably much easier to actually see it in the sample file.
I am trying to determine how to great a formula for cells E5, E6 of the attached (in pink) that says if the value of the cell above (E4) is equal to or Greater than the value of cell E10, the cell will perform the formula that I already have in E5, E6.
But what I'm trying to do is create a 5 year investment plan whereby the worksheet automatically inputs those values for me if the balance is above our minimum reserve. That way I can play with the default assumptions and see how it changes throughout the worksheet.
I am trying to detete rows that have several specific values, upper and lower case, (A-H) in any of several columns (B through H). I can delete upper and lower case "D"s in column B, but I'm having difficulty stringing together several variations and getting at the "D"s that are midstream (such as: ADeC), I tried ("*D*") to no avail.
With . Cells(Lrow, "B")
If Not IsError(.Value) Then
'****
If LCase(.Value) = LCase("D") Then .EntireRow.Delete
What formula can I use to accomplish the following, if it can be done.
If B9 is 100% all the rest of the % cell inputs would be 0%
If B9 is less 100% ,lets say 50% all the rest of the % cell inputs would be less than or equal to 50% until any sum of those cells equal to 100%
in which case if I enter 50% on B9 and 25% on D9 and 25% on F9 their total sum would be 100%.
If I try to enter a % on H9 it should not allow me to do it
because then the total sum on O9 would be more the the original amount on A9
I need a formula that can look at to cells, and if they are both the same pick cell A1 but if one of the cells has a higher amount than the other pick that one.
so the formula would do the following
look at the amount in A1 and B1 if A1 is higher than B1 input A1, if B1 is higher than A1 input B1 but if A1 = B1 then input A1,
I M trying to get the lower values between to cells and have the lower valued cell highlighted,,,i have over 43 thousand lines of data to go throughand i was wondering if there was a quicker way to do this,,,for example cellA1 is $4.25 and cellA2 is $5.25 i want cell A1 to be highlighted,,is there a way?
View 2 Replies View RelatedI want the cell A3 to be the higher value between the cells A1 and A2 ....
A1 A2 A3
20 30 30
The values in F4:F14 are changed depending on the value in F2. The rows in green have a fixed value. The row in yellow has a lower limit (170)and upper limit (195). I cannot get a formula in F14 to perform this function.
View 3 Replies View RelatedI will enter a figure into A1. I will also enter a figure into C1. In E1 I would like to enter the lower of: 0.2% of A1 or 75% of C1
View 5 Replies View RelatedI have a range of numbers:
A1=24
A2=17
A3=9
A4=4
Based on this the MEAN=13.5 and STANDARD DEVIATION= 8.81286937760152
I want to create a formula to calculate the UCL and LCL
When I use MINITAB I get UCL=31.23 & LCL=-4.23
I am trying to work out a formula. I know it's a simple one but i can not work it out. If i work 9.5 hours or more per day I get an extra $10.50 for food allowance.
For example (see attachment) IF E17 is equal to 9.5 or higher then cell E23 should automatically read $10.50
I am looking for a formula that I can use in the lower table to fill in the missing County cells, based on the values in the Town/Zip columns on the top table (I apoligize for the crudeness):
CountyTownZipAbleTownA00000AbleTownB00001AbleTownC00002BravoTownD00003BravoTownE00004CountyTownZipMemberTownD00003BlackTownC00002FrankTownA00000GreeneTownB00001JonesTownA00000SmithTownC00006ThomasTownE00004White
This would consist of hundreds of Zips and Towns and this is just an abbreviated mock up.
let say in cell A6 i have a list
SnG
Cash
MTT
I can pick one of these. If i pick Cash then i want a specific cell to run a specific formula. depending on the item chosen.
So in cell A6 is the list.
in cell B6 an amount will be place and in C6 another amount will be place. the number for c6 will range from a -number to a +number.
But D6 looks to see if B6 meet the requirements for MTT, SnG or Cash depending on which item was selected from the list. and uses the formula below with $c$3 changing from to either $D$3 or $F$3 and comparing the values for the chosen item. the formula changes would look this
=IF(ISBLANK(C6),IF(B6>$C$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$D$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$F$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
I am trying to get a simple formula to look in A1 and if it is lower than A2 then return the value in A1 if it is not then return the value in A2..
View 4 Replies View Relatedi wanted to know if there is a way which i can so that would tell excel if a certain cell value is lower then another it would give a msg
for example
Cell A1 - 5
so if cell A2 is less then five and a macro is clicked then the macro would give a warning msg hence ending the macro
I want to have some cells with conditional formatting.
The case here is date.
I have a given range of cells which will take on date. I will select all of these and will creat conditional formatting so that if the date is less than 2 days or more, have font colour change to red.
Now, the current date will be refered on a single cell.
I have done =($C$3-2) and it works but this does not account for anything older than 2 days.
What am I missing here? How do I do or less then?
I've got a column of data that I need to split into further columns, the only way of identifying the split from the data is if a lower case character appears next to an upper case character.
For example, a cell in column A could look like;
Computer ProductsDrivesDVDExternal
And I'd need to split that out to cover columns A B and C with
Computer Products / Drives / DVDExternal
I'd need to do that for all the cells in column A.
if cell = null, then skip it to the lower cell.
the data is like this:
A361
A37
A38
A391
and i want to be like this:
A36
A39
without delete the row.
When I try to copy formulas across do I get a little black plus-sign in the lower right corner of the cell, when I point to it. I can then drag the plus-sign to the the area where I want to copy the formula. This plus-sign has now disappeared.
View 3 Replies View RelatedI have a table that I use to generate about 20 graphs. The lower and upper limits can be manually altered in the table. If the user leave those 2 cells empty, I want the upper and lower limits be determined by default by Excel. So that the limits don't have to be entered for every graph in order for the graphs to be generated without any debugging error.
With ActiveChart.Axes(xlValue)
.MinimumScale = y1Lower
.MaximumScale = y1Upper
.MinorUnitIsAuto = True
.MajorUnitIsAuto = True
.Crosses = xlAutomatic
.ReversePlotOrder = False
.ScaleType = xlLinear
.DisplayUnit = xlNone
End With
where
y1Lower = .Cells(i, j + 9)
y1Upper = .Cells(i, j + 10)
I paste new data into a sheet of a monthly report I prepare. For this sheet, the # of data rows change (and is unpredictable) every month. I need the value inside a specific cell that dynamcially moves up and down based on the # of rows for that month (because it's below the rows of data).
So I made a formula to identify the exact cell # every month.
Example:
This month the exact cell is F255 in the "Refi" sheet.
So my formula in the "Summary" sheet cell A1 first finds the cell row # only (255) and since it's always column F, in B1 I have
VB:
="F" & (A1)
This outputs "F255" in B1, successfully identifying the target cell.
Now how do I write a formula in C1 to grab the value from whatever cell is named in B1. (For this month, the value in cell F255 from the "Refi" sheet)
Can I get a formula for the below specification.
if a cell contains character A THEN multiply by cell B * 0.02,if a cell contains character B THEN multiply by cell B * 0.05,if a cell contains character C THEN multiply by cell B * 0.010
I would like to be able to put manually a formula in a specific cell (like a "requested date" cell) and then have a table that use this date for the headers and calculate +1 year for each columns.
For exemple:
=2012-01-01
=2013-01-01
=2014-01-01
=2015-01-01
requested date:
2012-01-01
Would you know a way to easily do it? when I try to do it manually (+365) it doesn't consider leap years. I thought about a =DATE formula but the requested date have to be manually entered...
I have a problem to solve
I have 2 worksheets named 'Products' and 'Order'
At the 'Order' i use 3 cells
Code
Pallets
Cases
When i entered a code to the cell 'code', it reads the code from the sheet 'Products' and then transfers to the active sheet 'Order' some items.
What i want is:
Because the user has to enter the quantity either to the cell 'Pallets' or
'Cases' i want to be locked the empty cell each time and to be used for calculations.
1st Eg.
The "45870"
Pallets to order : 50
because the user used the pallets the cell "Cases" must be locked and it must calculate the 50 pallets*100 so
Cases : 5000
2nd Eg.
The "45870"
Pallets to order : null
Cases : 5000
because the user didnt use any pallets the cell "Pallets" must be locked and it must calculate the 5000 cases/100 so
Pallets to order : 50
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
Not been around for some time now but have to do my annual update for this workbook and implement some new changes.
In the attached example workbook, I have created some formulas which reference a particular cell for each client e.g.