I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
I am trying find a match from multple "text" values.
The values I'm using are flight numbers from sheet "Indiv case" in column (range H2:H51). The flight number could occur multiple time in the column.
The associated flight number sheet "Code & categories" in column (range H2:H257) are associated with the last port of embarkation (range I2:I257) in "Code & categories" sheet.
I need to copy & past the name of the Last port of embarkation from sheet "Code & categories" into sheet "Indiv case" adjcent to the flight numbers in column (I2:I51).
Example: Sheet "Indiv case" from Column (H2:H51) Fligh number Data: UA863, VA4148, EK432, BA15, BA15, VA98, QF8, AC33 etc Using these value from "Indiv case" from Column (H2:H51) search and match valuse in "Code & categories" in column (range H2:H257)
If match found copy valuse from sheet "Code & categories in column (i2:I257) in to sheet "Indiv case" into column (I2:I51) Last port of embarkation".
H2;H257, I2:I257 Flight, Last Post 3k111, Singapore 3k131, Singapore AC33, Vancouver
Copy and Past "Last Port" into sheet "Indiv case (I2:I51) adjcent to matching flight code.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have a userform that I use to add a new record to a csv sheet.
In my workbook I have a table with the same format that my userForm has. What I am looking to do is copy the values from my lookup table on my sample sheet and past them in my add userform in the correct corresponding cells. I have been trying to make the code work for some time now with no luck.
Purpose: Build a roster from: Sheets(Settings).Range("A21").Value (this value is variable)
Problem: Find that A21 value in Range T2:T100 (each value in the range is unique) Copy that value to Sheets("Roster") E8 and the next 9 values to E14 E20 E26 E32 G2 G14 G20 G26 G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
i would like to copy a sheet to another sheet, rename, copy and paste special values. but after the sheet is copied to another, the macro stops working...?
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
I have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
I'm trying to use a macro that will copy & paste values from one workbook to another. Everything works fine until I try to get it to Paste to next available row.
It worked the first time, but after that it jumps, several hundred rows at a time.
I have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows: *CUSTOMER *CONTACT *MACHINE TYPE *SERIAL NUMBER *QUOTE NUMBER *ORDER NUMBER
I have 4 sheets called Data, xxx, www and yyy. The sheet names xxx, www and yyy are also words that are existing in the sheet Data in Row C. Am I able to copy paste all the lines existing in the sheet Data including i.e. xxx in Row C into the sheet xxx? This should also work for the words www and yyy.
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
I need a macro that will take the values that are in the far right cells and move them to an area on the left. the columns they will be pulling from are the IU & IV column starting with row 2 down to row 460. from there I need the values to be pasted into the D & E Columns starting at row 6. The two columns IU & IV are a date and a task for that date. When they are pasted into the columns D&E they will need to be sorted by dates (or just all of the blanks removed), with the soonest occurrence at the top. The reason for pasting values is because I have formulas pulling the tasks and dates off of another sheet. The last thing is that the macro needs to be triggered by the information in cell c2, when that cell is changed the formulas go to work and everything in cells IU & IV update. That is when I would like the macro to kick in and work the miracle.
I have been trying to build a colony of formulas that could do it, but I have given up, then I tried to make an array index it for me, but that wasn't working for me either.
I have 9 worksheets in a book with sheets 1-8 used for data entry, and sheet 9 used for a weekly data upload. Sheets 1-8 are all formatted the same, they just represent different vendors. I need a macro to look through column F (invoice number) on sheets 1-8 and see if the value of each cell already appears in column c on sheet 9. If the value is not found and the row value for column M (sheets 1-8) is >0, I need to copy the data from columns D:K and paste special values into the next blank row on sheet 9.
Basically I'm trying to see if I've already paid an invoice, and if not then I need to automatically add the data for payment. I've tried to mess around with a VBA code myself and ended up with a migraine every time. I've also tried to use the advanced filter, but the cell values I need to copy over contain formulas and conditional formatting...not to mention I can't delete the data on sheet 9 that has already been added.
I have a set of data on sheet1 indicating test scores and basic information. At the top of the data, I have some drop-down menus that allow me to select certain minimal score results. I used conditional formatting to highlight the rows of individuals that meet the selected criteria from the top of the screen. You will notice in the screenshot, that I placed a button at the top called "Go!". Ultimately, I'd like for when I push the "Go!" button, Excel will copy the highlighted cells and paste them into sheet2 (beginning on row 2 as I have a title bar in row 1).
I am searching for a macro that will find duplicate value in row A2 (id) then copy its corresponding column to a new sheet.. please refer to my attachment, and see the result i want on sheet2 and sheet3
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
