Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
I have a question about making a macro to copy from one sheet (sheet 1) and to paste on another (sheet 2).
I have 4 cells of data in sheet 1. it is row 1, column A through D.
I created a button to press on sheet 1 that can control a macro. I want the macro to copy the 4 cells of data on sheet 1 (row 1 A-D) and paste onto sheet 2 (row 1 A-D). then the macro ends.
User will then manually go back to sheet 1, manually delete data from sheet 1, and put in more data when they have it (same 4 cells, row 1 A-D again)
After someone presses the macro button on sheet 1, I want the macro button to paste into sheet 2 at the next empty row (sheet 2, row 2 A-D). The macro knows how to find the next empty row. I only know how to perform record macro and hit stop record.
I would like to paste my manually copied columns to another sheet next to an empty column. And start paste on column E if not empty using a command button as trigger
Like if i manually copy column B from sheet1 and paste it to sheet2 column E if not empty.
I would like to copy a value in a cell using a macro from one worksheet to another in the same workbook. If B1 in worksheet 1 has a value of 200 then this to be copied into worksheet 2 in the range of A1:A20 BUT in the next available empty cell, so if A1:A10 are full then 200 must go in A11.
I recorded the following Macro to copy Data to a Database Sheet, but cannot get it to find the next empty row. When I run the macro it will paste to whatever row the cursor is in. I would like to have the data copied to the next empty row starting with column "A2". Also (this may need another thread) I would like a formula in Column A to automatically record a new number with each new entry, starting with say 0001.
The aim-to fill in the gaps. I have a spreadsheet with a series of dates etc. and when two entries have the same date, the second one has an empty cell. For my formula to work I need the various empty cells to be filled by the correct date from above, this to be done down the column.
If you have time for a further problem, is there a macro which can work out the average of differing number of rows, with the rows being group by the fact that four different column catagories need to show identical values for the fifth number to be used to calculate the average.
I have two columns "Time" and "Code". I have a macro that inserts rows based on the Time. For instance, if a cell on the "Time" column has a value of 0:10, I then insert 10 rows right below that cell. If a cell on the "Time" column has a value of 0:40, I then insert 40 rows right below that cell and so on. This macro works fine. What I would like to do is this: After I run this macro and the required rows are inserted, I would like to copy the contents of the "Code" column onto all the inserted rows.
Lets say "Time" is in column B and "Code" is in column C. Now lets say B2 has value 0:25, B3 has value 0:10, B4 has value 0:05, then my first macro inserts 25 rows below B2, 10 rows below B3, and 5 rows below B4. Now, what I want to do is copy the value from C2 and paste it in the 25 rows inserted below B2, and copy the value from C3 and paste it in the 10 rows inserted below B4. I only want to paste contents on column c. all other cells needs to be empty.
Suppose I have a column with a lot of different hours in each cell. I have already inserted a blank line between each cell in this columm and know I need to repeat the hour just above the blank cell onto the blank cell,like the example below:
So, in brief steps, I need to: 1. insert blank lines between each row 2.copy the content of the cell of the first column (just above the blank line) to the cell just below it, in order to repeat the time 3.copy the content of the cell of the third column (just above the blank line) to the cell in column 2 (on the blank cell in column 2 of the blank line just created)
I am trying to make a simple invoicing sheet that once populated by clicking a button and running a macro, will pick data from various cells, copy and then paste to another sheet in the workbook.
I have for the most part done this, however I need the macro when pasting the data to the other sheet, to be able to paste it in the next blank row.
I have a row with about 230+ columns, a little over half of the columns have complex IF or Vlookup formulas. The goal would be to click a button on a UserForm (to create a new Client) to copy all row formulas to the next empty row.
The following code is intended to copy and paste the value from cell I2 to the first unused cell in column K. There is is header in cell K1. It works fine if there is a value in K2 or K3, etc., however, if K2 is blank (all cells beyond K1 are blank) I get an error 400 when I run the sub.
I'm have never learnt VB before and would like to try to write one to perform the following: If the next cell isempty, go to the last cell, copy it and paste into the empty cell; Else if the cell is not empty, go to next line and repeat the procedures until reach row =10000
.(BEFORE) Row 1:Product A Row 2: Row 3: Row 4: Row 5:Product B Row 7: Row 8: Row 9:......
Have a small VBA code that simply copy a row and then paste it on first empty row in another sheet. Its working if i use a regular macro, but i have some problems to get it to work with some code. I want it as VBA since the copying is alot smoother. The problem i have in the code is the PasteSpecial.value, Since i dont want the formula to get pasted. Attachiing the worksheet. Its the macro PasteSpecial that i need alittle guiding on if possible.
I have a column of data in a range with some empty cells, I am trying to copy this data and then paste it into another column immediately after the existing data but without the empty cells, I am currently using the record button on the macro and copying to another column and then sort up a-z then copy again and paste. Long winded and sometimes still gives me a empty cell.
A B C D
COPIED TO ANOTHER COLUMN EXISTING DATA EXISTING DATA A B C DRange("E3:E51").Select Selection.Copy Range("O3:O51").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
I made a macro to copy data from my data entry sheet to my database sheet:
Code:
Private Sub CommandButton1_Click() Application.ScreenUpdating = False Dim NextRow As Range Set NextRow = Sheet4.Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0)
[Code] .......
The main to problems are that its not pasting in in the right collum and its not passing the next entry in the next free row.
Have attached a screenshot of the two sheets, at the sheet has some personal data, i won't be able to upload it.
My spreadsheet is sorted in numerical order in column A. Column B through AA only sporadically has data, although the data is present in full throughout each row. How can I add to my macro to copy the first full row of data (B#-AA#) and paste until it reaches the next row of full data and then repeat the same process. The biggest issue is once it reaches the last row, I would like it to paste the data in 29 additional rows.
Need code to copy a column from a worksheet, and paste it in the first empty column in a second worksheet? I can do this easily when I want to copy/paste to the first empty row using the
Sheet3.Select Range("A1:A10").Select Application.CutCopyMode = False Selection.Copy Sheet2.Select Dim LastCell As Range With ActiveSheet Set LastCell = .Cells(.Rows.Count, "A").End(xlUp) If IsEmpty(LastCell) Then 'do nothing Else Set LastCell = LastCell.Offset(1, 0) LastCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End If End With
but I cannot find a way to change this to columns!
I have programmed in many languages but a noob when it comes to VBA. I can guess at the syntax but I don't really understand what I am doing. So I was wondering if the following is possible. I want to write a script that checks for a value on a different sheet (SheetA) and based on it being defined (ie not empty) copies the entire row to a different sheet (SheetB). I probably have around 120 rows in SheetA and will only expect to see 10-20 rows on SheetB based on the criteria for copying. I am also unsure if the VBA code should be for SheetA or SheetB. At first I thought I could just hide rows based on a value but I also need to export the sheet to a csv file and looks like excel exports all the rows, even the hidden ones and I don't want that.
-For each row between A3 and A5000 -If cell in column L is empty -Do Nothing and move on to next row -Otherwise if cell in column L is not empty -Copy entire row to alternate sheet, and delete row from original sheet. -After all rows between A3 and A5000 have been checked, sort alternate sheet in ascending order based on the contents of column A.
The issue is that the code keeps skipping some rows that should be copied, possibly due to the 'for each' command not liking how I'm deleting rows (maybe?)
VB: Private Sub Worksheet_Change(ByVal Target As Range) Dim rCell As Range Dim lRow As Long lRow = Range("A3:A5000").Rows.Count
I am trying to create a macro that copies cells B2 and C6 from the active worksheet in a workbook called "transfer". Then searches for the first empty cell in a worksheet called "summary" in a workbook called "report" and pastes the value from B2 in the first empty cell in column D and the value from C6 in the first empty call in column E.
I have a lot of outputs being spat out in csv files.
I need to get some of the data from set columns and copy this over into a master tracker. Columns are not sequencial and may need to copy change at a later date. Example attached.
Some data fields will have letters in them as well. Some are varying in length in terms of the amount of data within a cell. eg. "AB389238923589Y234HI" or just "A-GT6"
I don't know where to start VBA wise but it must be possible rather than open copy paste.
The tracker has a set name but will change quaterly.
The Output CSV files are new files with a number (no date) for titles.
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I would like to have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, I would like the entire row to be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code:
[Code] .....
However when this macro runs, the row left behind on the original sheet is a blank row and I don't want this. I would like it to be continuous spreadsheet, not dotted with random blank rows!
The script works however I dont want the formulas to be entered into the cells that dont have any information in them because I am using them in a list box. To sum it up. So if sheet LA (Range A3:B98) is empty then dont copy the formula. If there is a data in this range then copy the formula. Here is the script that copies the formula's I just need to check sheet LA before it does this.
I'm unsure how to adapt the code to suit my needs.
I have an Excel workbook that is created a few times a month from a template. When I update it I run a macro that saves a values only copy with the current date. I'd like to copy non-blank rows (from row 8 down) into the first empty row in a master workbook that is saved on a network drive. The path to the master workbook is "B:8MPBGTrade Pre-AdviceBG Trade Confirm Master.xls"