I recorded the following Macro to copy Data to a Database Sheet, but cannot get it to find the next empty row. When I run the macro it will paste to whatever row the cursor is in. I would like to have the data copied to the next empty row starting with column "A2". Also (this may need another thread) I would like a formula in Column A to automatically record a new number with each new entry, starting with say 0001.
View 4 Replies
I want excel to copy some data fram 5 defined colums into the first empty row in a list. The problem is decribed better in the attached dummybook.
View 2 Replies View RelatedI have a userform that loads with when excel starts. The workbook has a second and third sheets with names from A1 to A20. The form is used to add information to the first sheet. There are two list boxes on the form the reference via VBA the names on sheets 2 and 3. When form initially opens the list boxes are void of data. I also have a macro that reopens the form without having to close the workbook. When I close the form and reopen it the list boxes are populated as they should be - so the list boxes are working correctly just not being populated initially. In the open form module I have code that sets the rowsource for the data on sheet 2 and 3. Why the userform does not populate when the workbook initially opens?
Here is the code in my open userform module
Sub openuserofrm()
ActiveWorkbook.Sheets("VILLAGEvisits").Activate
Sheets("VILLAGEvisits").Unprotect Password:=""
Sheets("OldVisits").Unprotect Password:=""
[Code] ....
I have a list box looking at range IB5:IB100 I only have about 25 names listed. However the list box opens up about 3/4 of the way down with the list of names that are not there. The user then needs to scroll up to see the names.
How can I get the list box to show only the names in the list? or at least start at the top of the list (IB5)
I have the ignore blank button checked.
I have a combo box, from the control toolbar, that I have populated with a named range in the properties of the combo box. The items in the named range vary when an earlier combo box is selected. There are always at least 2 values populated in the named range, but can be as many as 22 values. What happens is when there are only 2 items in that range, the drop down list from the combo box shows 20 blank lines! I have been searching for how to "ignore empty cells" in this range, but cannot find it. The empty cells are always before and/or after the populated cells, if that helps. The range is updated via VBA, not formulas, if that is helpful as well.
View 9 Replies View RelatedIs there anyway to prevent an empty entry from showing up in a list box?
And pending that the above is possible is there a way to exclude the first value a column?
I want all values in column A except A! to display that aren't blank.
I don't know if this is best in a formula or macro but what I am trying to do is create a list of data with no empty cells from a list of data with empty cells.
What I want to say is if A1 is blank move to A2, if it's not return the value in A1 to B1. If A1 and A2 are blank then return the value in A3 to B1 and so on. Generally it's a sort function but I want it to happen automatcially and lkeep all my values in the original order
Original Version:
Date 1/4 Value 1/4
23/02/199913.506
5/05/199911.901
14/05/199912.152
24/05/199911.607
7/06/199911.187
29/07/199911.828
2/09/199910.473
6/09/199910.429
Desired outcome:
Date 1/4 Value 1/4
23/02/199913.506
5/05/199911.901
14/05/199912.152
24/05/199911.607
7/06/199911.187
29/07/199911.828
2/09/199910.473
6/09/199910.429
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View RelatedI have a question about making a macro to copy from one sheet (sheet 1) and to paste on another (sheet 2).
I have 4 cells of data in sheet 1.
it is row 1, column A through D.
I created a button to press on sheet 1 that can control a macro. I want the macro to copy the 4 cells of data on sheet 1 (row 1 A-D) and paste onto sheet 2 (row 1 A-D). then the macro ends.
User will then manually go back to sheet 1, manually delete data from sheet 1, and put in more data when they have it (same 4 cells, row 1 A-D again)
After someone presses the macro button on sheet 1, I want the macro button to paste into sheet 2 at the next empty row (sheet 2, row 2 A-D). The macro knows how to find the next empty row. I only know how to perform record macro and hit stop record.
I have a sheet (many really) that I would like to copy to another sheet.
So on Sheet XXSample09 I would like to copy the rows that have data in the range A7:H300 and paste it into the next available row on sheet Sample09.
I have a button on sheet XXSample that sorts the data, I want to be able to add some more code so that it will copy this data over to sheet Sample09.
I would like to paste my manually copied columns to another sheet next to an empty column. And start paste on column E if not empty using a command button as trigger
Like if i manually copy column B from sheet1 and paste it to sheet2 column E if not empty.
I would like to copy a value in a cell using a macro from one worksheet to another in the same workbook. If B1 in worksheet 1 has a value of 200 then this to be copied into worksheet 2 in the range of A1:A20 BUT in the next available empty cell, so if A1:A10 are full then 200 must go in A11.
i have to copy a Range A2:AA2
and i want to paste it into the first empty row (A3, .....)
can anyone write me the code for that?
I have the follwoing data:
A B
1 Job No. Job Date
2 33625 12/7/2011
3 Davis: Please contact Shine @ Prudential Insurance re: copy
4 336173/9/2012
5 Gaskill: Please contact Swiers @ SEC re: copy sale; emailed
and so on...
I would like to copy the text from B3, B5,B7 and so on to a a new column starting in C2 and then delete all of the empty rows.
The aim-to fill in the gaps. I have a spreadsheet with a series of dates etc. and when two entries have the same date, the second one has an empty cell. For my formula to work I need the various empty cells to be filled by the correct date from above, this to be done down the column.
If you have time for a further problem, is there a macro which can work out the average of differing number of rows, with the rows being group by the fact that four different column catagories need to show identical values for the fifth number to be used to calculate the average.
I have two columns "Time" and "Code". I have a macro that inserts rows based on the Time. For instance, if a cell on the "Time" column has a value of 0:10, I then insert 10 rows right below that cell. If a cell on the "Time" column has a value of 0:40, I then insert 40 rows right below that cell and so on. This macro works fine. What I would like to do is this: After I run this macro and the required rows are inserted, I would like to copy the contents of the "Code" column onto all the inserted rows.
Lets say "Time" is in column B and "Code" is in column C. Now lets say B2 has value 0:25, B3 has value 0:10, B4 has value 0:05, then my first macro inserts 25 rows below B2, 10 rows below B3, and 5 rows below B4. Now, what I want to do is copy the value from C2 and paste it in the 25 rows inserted below B2, and copy the value from C3 and paste it in the 10 rows inserted below B4. I only want to paste contents on column c. all other cells needs to be empty.
I am in the middle of writing a complex loop macro..
and need to be able ask it to only copy over information if a cell has any value/word in it..
I know how to write if it doesnt have a value
i.e do while activecell = ""..
But what if the ceel has any value.. i.e even if its letters/numbers and they are never the same..
Suppose I have a column with a lot of different hours in each cell. I have already inserted a blank line between each cell in this columm and know I need to repeat the hour just above the blank cell onto the blank cell,like the example below:
Present worksheet:
00:08:32 8765.987 7654.876
xxxxx blank linexxxxx
01:35:41 123.456 9876.543
xxxxx blank linexxxxx
Future worksheet:
00:08:32 8765.987 7654.876
00:08:32 7654.876 xxxxxxxxx
01:35:41 123.456 9876.543
01:35:41 9876.543 xxxxxxxxx
So, in brief steps, I need to:
1. insert blank lines between each row
2.copy the content of the cell of the first column (just above the blank line) to the cell just below it, in order to repeat the time
3.copy the content of the cell of the third column (just above the blank line) to the cell in column 2 (on the blank cell in column 2 of the blank line just created)
I am trying to make a simple invoicing sheet that once populated by clicking a button and running a macro, will pick data from various cells, copy and then paste to another sheet in the workbook.
I have for the most part done this, however I need the macro when pasting the data to the other sheet, to be able to paste it in the next blank row.
This is the current code:
VB:
Range("H19").Select
Selection.Copy
Sheets("Sheet4").Select
[Code]....
Its quite lengthy as its referencing one off random cells around the first sheet.
how to paste to the next blank row?
I have a row with about 230+ columns, a little over half of the columns have complex IF or Vlookup formulas. The goal would be to click a button on a UserForm (to create a new Client) to copy all row formulas to the next empty row.
View 5 Replies View RelatedThe following code is intended to copy and paste the value from cell I2 to the first unused cell in column K. There is is header in cell K1. It works fine if there is a value in K2 or K3, etc., however, if K2 is blank (all cells beyond K1 are blank) I get an error 400 when I run the sub.
View 14 Replies View RelatedI'm have never learnt VB before and would like to try to write one to perform the following: If the next cell isempty, go to the last cell, copy it and paste into the empty cell; Else if the cell is not empty, go to next line and repeat the procedures until reach row =10000
.(BEFORE)
Row 1:Product A
Row 2:
Row 3:
Row 4:
Row 5:Product B
Row 7:
Row 8:
Row 9:......
Have a small VBA code that simply copy a row and then paste it on first empty row in another sheet. Its working if i use a regular macro, but i have some problems to get it to work with some code. I want it as VBA since the copying is alot smoother. The problem i have in the code is the PasteSpecial.value, Since i dont want the formula to get pasted. Attachiing the worksheet. Its the macro PasteSpecial that i need alittle guiding on if possible.
View 4 Replies View RelatedI have a column of data in a range with some empty cells, I am trying to copy this data and then paste it into another column immediately after the existing data but without the empty cells, I am currently using the record button on the macro and copying to another column and then sort up a-z then copy again and paste. Long winded and sometimes still gives me a empty cell.
A
B
C
D
COPIED TO ANOTHER COLUMN
EXISTING DATA
EXISTING DATA
A
B
C
DRange("E3:E51").Select
Selection.Copy
Range("O3:O51").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
[Code] .......
I made a macro to copy data from my data entry sheet to my database sheet:
Code:
Private Sub CommandButton1_Click()
Application.ScreenUpdating = False
Dim NextRow As Range
Set NextRow = Sheet4.Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0)
[Code] .......
The main to problems are that its not pasting in in the right collum and its not passing the next entry in the next free row.
Have attached a screenshot of the two sheets, at the sheet has some personal data, i won't be able to upload it.
My spreadsheet is sorted in numerical order in column A. Column B through AA only sporadically has data, although the data is present in full throughout each row. How can I add to my macro to copy the first full row of data (B#-AA#) and paste until it reaches the next row of full data and then repeat the same process. The biggest issue is once it reaches the last row, I would like it to paste the data in 29 additional rows.
1
22
13
2
1
56
54
65
[code]......
Need code to copy a column from a worksheet, and paste it in the first empty column in a second worksheet? I can do this easily when I want to copy/paste to the first empty row using the
Sheet3.Select
Range("A1:A10").Select
Application.CutCopyMode = False
Selection.Copy
Sheet2.Select
Dim LastCell As Range
With ActiveSheet
Set LastCell = .Cells(.Rows.Count, "A").End(xlUp)
If IsEmpty(LastCell) Then
'do nothing
Else
Set LastCell = LastCell.Offset(1, 0)
LastCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End If
End With
but I cannot find a way to change this to columns!
I have programmed in many languages but a noob when it comes to VBA. I can guess at the syntax but I don't really understand what I am doing. So I was wondering if the following is possible. I want to write a script that checks for a value on a different sheet (SheetA) and based on it being defined (ie not empty) copies the entire row to a different sheet (SheetB). I probably have around 120 rows in SheetA and will only expect to see 10-20 rows on SheetB based on the criteria for copying. I am also unsure if the VBA code should be for SheetA or SheetB. At first I thought I could just hide rows based on a value but I also need to export the sheet to a csv file and looks like excel exports all the rows, even the hidden ones and I don't want that.
View 8 Replies View RelatedWhen the worksheet is changed;
-For each row between A3 and A5000
-If cell in column L is empty
-Do Nothing and move on to next row
-Otherwise if cell in column L is not empty
-Copy entire row to alternate sheet, and delete row from original sheet.
-After all rows between A3 and A5000 have been checked, sort alternate sheet in ascending order based on the contents of column A.
The issue is that the code keeps skipping some rows that should be copied, possibly due to the 'for each' command not liking how I'm deleting rows (maybe?)
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rCell As Range
Dim lRow As Long
lRow = Range("A3:A5000").Rows.Count
[Code] .....
I am trying to create a macro that copies cells B2 and C6 from the active worksheet in a workbook called "transfer". Then searches for the first empty cell in a worksheet called "summary" in a workbook called "report" and pastes the value from B2 in the first empty cell in column D and the value from C6 in the first empty call in column E.
View 4 Replies View Related
