I am in the middle of writing a complex loop macro..
and need to be able ask it to only copy over information if a cell has any value/word in it..
I know how to write if it doesnt have a value
i.e do while activecell = ""..
But what if the ceel has any value.. i.e even if its letters/numbers and they are never the same..
Suppose I have a column with a lot of different hours in each cell. I have already inserted a blank line between each cell in this columm and know I need to repeat the hour just above the blank cell onto the blank cell,like the example below:
Present worksheet:
00:08:32 8765.987 7654.876
xxxxx blank linexxxxx
01:35:41 123.456 9876.543
xxxxx blank linexxxxx
Future worksheet:
00:08:32 8765.987 7654.876
00:08:32 7654.876 xxxxxxxxx
01:35:41 123.456 9876.543
01:35:41 9876.543 xxxxxxxxx
So, in brief steps, I need to:
1. insert blank lines between each row
2.copy the content of the cell of the first column (just above the blank line) to the cell just below it, in order to repeat the time
3.copy the content of the cell of the third column (just above the blank line) to the cell in column 2 (on the blank cell in column 2 of the blank line just created)
I am trying to make a simple invoicing sheet that once populated by clicking a button and running a macro, will pick data from various cells, copy and then paste to another sheet in the workbook.
I have for the most part done this, however I need the macro when pasting the data to the other sheet, to be able to paste it in the next blank row.
This is the current code:
VB:
Range("H19").Select
Selection.Copy
Sheets("Sheet4").Select
[Code]....
Its quite lengthy as its referencing one off random cells around the first sheet.
how to paste to the next blank row?
I have a column of data in a range with some empty cells, I am trying to copy this data and then paste it into another column immediately after the existing data but without the empty cells, I am currently using the record button on the macro and copying to another column and then sort up a-z then copy again and paste. Long winded and sometimes still gives me a empty cell.
A
B
C
D
COPIED TO ANOTHER COLUMN
EXISTING DATA
EXISTING DATA
A
B
C
DRange("E3:E51").Select
Selection.Copy
Range("O3:O51").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
[Code] .......
My spreadsheet is sorted in numerical order in column A. Column B through AA only sporadically has data, although the data is present in full throughout each row. How can I add to my macro to copy the first full row of data (B#-AA#) and paste until it reaches the next row of full data and then repeat the same process. The biggest issue is once it reaches the last row, I would like it to paste the data in 29 additional rows.
1
22
13
2
1
56
54
65
[code]......
I want a macro which will copy all the data from sheet 1 in columns A:C ignoring any blanks
then paste it into the first free cell in column B of sheet 2
I have two sheets and I want to copy the values in a row in the first sheet to the second sheet. I am doing the following:
Sheet2. Range("A1").Value = Sheet1.Range("A1", Sheet1.Range("A1").End(xlToRight)).Value
But this only copies the value of A1 in Sheet1 to A1 in Sheet2. How should I modify it to copy the values for the whole range to the second sheet?
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View Relatedfirst time posting. Need some help. I have a workbook with two sheets - (say sheet A and sheet B) that I need to copy a range from and paste (concatonated) into a new workbook. The thing is I want to copy the "non-empty" cells in columns d and e of each sheet - another words - I dont want to specify a specific cell range because users will be periodically adding new rows. Then I want to paste the "combined" from both sheets into a new sheet in a new workbook.
Is there way i can have a macro attatched to a button that when clicked, will copy BX:BX on sheet1, remove all the blank cells and put it on D:D on sheet2. Next time it is clicked, it will put BX:BX on to the next available column after removing the blanks and so on, filling a column at a time on sheet2?
If the above is easy, it would be really good if it could paste into columns until it reaches column H and then go back to D again but paste below the data already there, then E, but below, etc. I think though that the last bit is asking a bit much and is just cosmetic and easier to print, so dont worry too much.
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
How I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?
Data as shown in present worksheet.
A
B
C
D
[Code]....
I need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
I have a recordset that I get from Access and dump it onto an Excel spreadsheet. Many cells look empty but when I run a macro that depends on if these cells are empty it considers them not to be empty. Does anyone know what Access is putting in these empty cells?
View 4 Replies View RelatedWorking in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedI have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?
I have a question about making a macro to copy from one sheet (sheet 1) and to paste on another (sheet 2).
I have 4 cells of data in sheet 1.
it is row 1, column A through D.
I created a button to press on sheet 1 that can control a macro. I want the macro to copy the 4 cells of data on sheet 1 (row 1 A-D) and paste onto sheet 2 (row 1 A-D). then the macro ends.
User will then manually go back to sheet 1, manually delete data from sheet 1, and put in more data when they have it (same 4 cells, row 1 A-D again)
After someone presses the macro button on sheet 1, I want the macro button to paste into sheet 2 at the next empty row (sheet 2, row 2 A-D). The macro knows how to find the next empty row. I only know how to perform record macro and hit stop record.
I have a sheet (many really) that I would like to copy to another sheet.
So on Sheet XXSample09 I would like to copy the rows that have data in the range A7:H300 and paste it into the next available row on sheet Sample09.
I have a button on sheet XXSample that sorts the data, I want to be able to add some more code so that it will copy this data over to sheet Sample09.
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
I am trying to lock the unused cells in 32, 2 column by 7 row named ranges, based on whether or not two cells, above each range are equal or less than each other. In other words while one of the cells is less than or equal to the second cell all cells in the range below should be unlocked, as soon as that condition is no longer true the blank cells need to be locked.
I am trying to use this in the Workbook_Sheetcalculate so that the macro will run automatically.
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
I would like to paste my manually copied columns to another sheet next to an empty column. And start paste on column E if not empty using a command button as trigger
Like if i manually copy column B from sheet1 and paste it to sheet2 column E if not empty.
I would like to copy a value in a cell using a macro from one worksheet to another in the same workbook. If B1 in worksheet 1 has a value of 200 then this to be copied into worksheet 2 in the range of A1:A20 BUT in the next available empty cell, so if A1:A10 are full then 200 must go in A11.