1) Select/Copy rows 1 thru 35 of column C from "Start" tab.
2) Special Paste/transpose them in row 2 of "Finish" tab (1st 35 columns in row 2 should fill up).
3) Go back to "Start" tab, move exactly three rows down from bottom of previous selection in column C and copy the next 35 rows (rows 38 thru 72 in column C).
4) Again return to "Finish" tab, and special paste/transpose in next row down (row 3 in this case).
5) Continue to repeat this action until all rows of data in column C have been copied and transposed/pasted from "Start" tab to "Finish" tab. Variable number of rows on "Start" tab.
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
I have a financial model (attached) which calculates the final cash flows (in a calculation sheet named 9.Operations, rows 428 to 437) for a particular plot. However,the model has a list of 17 plots in the input sheet (3.Input-Plot Details). The macro must change the plot number in the 9.Operations sheet(cell G11), re-calculate the final cash flows and paste all the final cash flows for 1 to 17 plots in a single separate sheet consecutively.
I have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB: Sub CopyRow() Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0) End Sub
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order A B C
Date of delivery Product
1.9.2013 orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
I have attached a portion of an excel file I am using at the moment. What I require is a piece of VBA code which will allow me to copy selected data based on a combo box selection. What needs to happen is this :-
If the selection in the "Index" worksheet combo box related to "Month" in cell G19 is for instance "December", I would like the macro to compare this cell value to the cell values in cells C96, C124, C152, C180, C209, C236, C263 and C290 in the "Tech Services" worksheet and where the values match.......copy the commentary (Range C126:Z147 in December's case) to the range C34:Z55.
I need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:
[Code] .........
You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.
I have autofiltered a selection of data then issued the copy command in the code below so as to copy the visible area. In attempting to paste the data in the first blank row the program fails on the last code statement, "ActiveSheet.Paste".
The error is 1004.
An alternative suggested in the error message is to select an area the same shape and size as that being copied to paste into. Given that the copied data will change on each run how might I do this, and is this a valid alternative?
Selection.AutoFilter Selection.AutoFilter Field:=7, Criteria1:="=TC", Operator:=xlAnd Selection.AutoFilter Field:=2, Criteria1:=">=7330", Operator:=xlAnd Selection.SpecialCells(xlCellTypeVisible).Select Selection.Copy Range("A" & LR + 1).Select ActiveSheet.Paste NB. most of the code has been generated by the Macro recorder.
I'm working in a rather large (20meg) Excel file with multiple worksheets, references, formatting, etc.
Suddenly, when I attempt to Copy > Paste Special > Formats using more than a few cells at a time, I receive this error message...
"Selection is too large."
That's it - no reference, no nothing. Doesn't matter if I select a few cells, or entire rows, I get the same message everytime. However, I can copy-n-paste the entire 8000+ rows of data into a NEW file with no problems whatsoever. It handles everything - data, formatting, formulas, etc. But within my working file (same worksheet even) I get the error everytime.
I'm not using a macro. This file has worked fine for months. I'm doing absolutely nothing differently than ever before. This error literally just started today.
I know there is some issue with copy/paste of 8100+ non-contiguos cells, but I'm using contiguos cells. And again, I can copy nearly 10K entire rows of data and paste into a new workbook - just not within the same workbook and worksheet.
I've searched online - here, Mr.Excel, Microsoft, everywhere I can think of. Of all the problems I've found answers too, I have yet to find ANYTHING dealing with this problem - except in the context of a macro, which I am not using.
What I need is the code for a loop which copies a formula from cells E1 and E2 and then pastes it, staring at C7 and then every 32 cells down until row 20000.
The formula attached here is in cell J4. I pulled this formula down to J26. Then copy J4:J26 and paste to M2:M26, P2:P26, until CG2:CG26. I need 26 times to paste to the range. There are even 4 columns distance between two pasting range.
How can write a For Loop to copy and paste to these ranges?
I have two sheets that I am using. sheet 2 has a list of experiments in column C with information regarding the experiment in columns F - J. On sheet 1 I have a dropdown box with a list of all the experiments. When I select an experiment from the dropdown box I would like to populate columns K - O on sheet 1 with the information from columns F - J for the selected experiment on sheet 2.
I've attached below a small part of my code. I am wondering if there is a way to do this, without copying and pasting something 30 times, but using a loop instead. As you can see there are a series of productsNumbers (30 in total, but this example is for 3). Each productNumber is a string that is actually a 5 digit number, so it can be an integer as well, if it has to.
I would like to code below to loop for as many products as there may be. The way that I have it right now does not work - I feel that I am missing something small or that there is no way to do this.
Finding the value "OK" in a range of data in Worksheet(1) out of Range("Product"). Ones the value "OK" is found, the entire row is cut and then pasted into a new worksheet 'Range("A3")'. Then the loop sets in and finds the next value "OK" in the range untill it reaches the end of the predetermined Range("Product").
The only problem I have is that the code I have written already performs the process, but when pasting the data into the new worksheet, paste's all of the found rows into the same row. So what you are left with in the new pasting sheet (Worksheet2), is only the last found row because it keeps overiding previously found data. What I need the Macro to do is find the next availible blank row in Worksheet2 and for all values cut out of Worksheet1. Now there was a simular posting to this on the forum, but when I tried it in my code it would not work...
Sub FindAndPaste1() With Worksheets(1).Range("Product") Set c = .Find("OK", LookIn:=xlValues) If Not c Is Nothing Then firstAddress = c.Address Do c.EntireRow.Cut Destination:=Worksheets("Sheet2").Range("A3") Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> firstAddress End If End With End Sub
I also attach the Excel spreadsheet called Product Macro.xls
I want to make a vba (macro) for excel that will look at the column to the left of an active cell and if there is a formula there drag it over to the right into the active cell and if there is not a formula there copy and paste value of what is in the active cell into itself deleting any formulas that may have been there. on top of that if the cell to the left of the active cell has no boarding I need to copy it and paste format to active cell. I need it to continue a number of times to be decided in cell A1 and just go down the column doing this. Please help, I know it sounds hard but I need it for 10,000's of lines of code and really cant do it by hand ...
Dim UltFila As Long, i As Integer, k As Integer UltFila = Range("A65536").End(xlUp).Row k = 2 For i = UltFila To 2 Step -1 If Cells(i, 2) = 4102 Then Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1) End If If Cells(i, 2) = 4104 Then Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1) End If ..................
VB: Sub CopyNextTab() WorkbookName = ActiveWorkbook.Name Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm" 2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet" 3. Select the original Workbook and move to the next tab 4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
I'm trying to use a VBA Macro to copy and paste a row of cells from 14 worksheets into in another worksheet in a Colum. The worksheets are entitled Data 1, Data 2, Data 3 and so on until Data 14 and the worksheet that I want to paste the data to is entitled sheet 1. The row of data that I want to copy and paste is in the same place on each worksheet C4 - IR4. I can do this using the Macro recorder but there is a lot of code and ultimately I want this to be part of a much bigger Macro once I get better at figuring this stuff out.
I have read that this can be done by using a Do Until and then using a loop. By the way I am using Excel 2003 with XP.
I have a workbook, in which from sheet1, I have to copy first row and paste it in another workbook in sheet1 This I have to do for all the rows present in first workbook. I have written code for one single row, but for all rows,
below is the code :
Option Explicit Dim wbIP As Workbook Dim wbJT As Workbook Dim wbET As Workbook Dim mypathET As String Dim mypathJT As String Dim mypathIP As String Dim vals As Variant
I have a long column of data in column D (D2 to D8761) and I would like to sequentially select 24 cells at a time (D2:D25, D26:D49, D50:D73...D8738:D8761) copy them and paste them to another sheet as separate rows.
For instance, the selected data from Sheet 1, D2:D25, would be pasted/transposed to Sheet 2 B9:Y9. I would like the macro to loop so it would then select D26:D49 and paste/transpose to B10:Y10 and so on until it finishes transposing the final data group of D8738:D8761.
I'll add the macro that I recorded using the brute force method so perhaps you can have a better understanding of what I am trying to accomplish.
My code (with help from this forum) loops through all workbooks, all sheets and all columns OK as I have tested it with message boxes
I need to take the value of Range("C5") from each column of all sheets of all workbooks and paste it to Range("A4") downwards in Workbook("Loop Folder.xls") . That is, each new value is inserted in the next row of column A.
Sub test4() ' populate analysis sheet ' copies cell("C5") from each column in each sheet in each workbook in a directory
Dim Mypath As Variant Dim excelfile As Variant
Mypath = "U:September 2006" ' folder where all excel files reside excelfile = Dir(Mypath & "*.xls")
I need a macro that can cut and paste a selection of 3 cells to a location one row above and 3 cells to the left. I want to run it each time manually from the right cell among the 3. the macro should therefore (when standing on the right cell of the 3):
1. select 2 more cells to the left 2. cut the selection 3. move 3 cells to the left and one cell up 4. paste 5. move the cursor back to the starting location
I have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
I have one column of names in excel. The column may contain more than one row with the same name but these rows with the same name will all be grouped together. This is an exampe (each name represents a row in column A):
What I want to do is copy the rows with the same information, e,g, the rows with 'julie' above, paste them into a new spreadsheet and email this spreadsheet to specific email addresses and then do the same for 'jonathan'.
I can work out how to send an email using VBA but I am really stuck as to how to go through the rows and send the email in discrete 'chunks'. I have tried using a for next loop, looping through the rows and copying/pasting rows that are the same as the previous one into a new spreadsheet but this does it one row at a time. If I include the instruction to email the spreadsheet within the loop this would also email the new spreadsheet one row of information at a time, i.e. three emails for 'julie' each containing a spreadsheet with one row of information on it, rather than one email containing one spreadsheet with all three rows on it.
