I am trying to use a code to run a loop and search in column B for a certain name and if it finds it I want it to then look at column P and if it finds that the result in column B is less than $1000 then I want it to cut the entire row and paste the row in another sheet. Here is the code.
View 4 RepliesI want to make a vba (macro) for excel that will look at the column to the left of an active cell and if there is a formula there drag it over to the right into the active cell and if there is not a formula there copy and paste value of what is in the active cell into itself deleting any formulas that may have been there. on top of that if the cell to the left of the active cell has no boarding I need to copy it and paste format to active cell. I need it to continue a number of times to be decided in cell A1 and just go down the column doing this. Please help, I know it sounds hard but I need it for 10,000's of lines of code and really cant do it by hand ...
View 8 Replies View RelatedI have one column of names in excel. The column may contain more than one row with the same name but these rows with the same name will all be grouped together. This is an exampe (each name represents a row in column A):
ColumnAColumnB
andrewData
julieData
julieData
julieData
jonathanData
jonathanData
What I want to do is copy the rows with the same information, e,g, the rows with 'julie' above, paste them into a new spreadsheet and email this spreadsheet to specific email addresses and then do the same for 'jonathan'.
I can work out how to send an email using VBA but I am really stuck as to how to go through the rows and send the email in discrete 'chunks'. I have tried using a for next loop, looping through the rows and copying/pasting rows that are the same as the previous one into a new spreadsheet but this does it one row at a time.
If I include the instruction to email the spreadsheet within the loop this would also email the new spreadsheet one row of information at a time, i.e. three emails for 'julie' each containing a spreadsheet with one row of information on it, rather than one email containing one spreadsheet with all three rows on it.
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, the entire row will be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code. However when you press the update button again, all the newly pasted rows on the Converted worksheet are deleted. (I would like when i press the update button it to NOT affect the Converted worksheet, just add any new data found on the Consolidated sheet to the Converted sheet.) I assume this is because my current code her below is NOT telling the spreadsheet to paste to the NEXT AVAILABLE EMPTY ROW. Current code:
[Code].....
So the problem is this line:
[Code] .....
I have attempted to replace this line with:
[Code] .....
But there is something wrong as the code keeps breaking on that line!
Would like a macro that will do the following:
- Go into a specified folder (ie. C:data) which contains multiple workbooks
- search each workbook for a column titled SCIN
- copy the cell labelled SCIN and 60 cells below it to a new workbook (summary workbook)
- repeat the process in all the workbooks until all of the SCIN columns have been located and copied into the summary workbook
Copy paste specific column with specific heading using macros. Roll No
Name
1
John
2
Abdul
3
Baig
1
I Want the Macro to find the column with heading "Name"
2
Copy the list from Name till the last Cell that is B1048576
3
Paste in Sheet2 Cell A1(Please see result in Sheet2)
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
text
1
text
text
[Code]....
I need to look for specified row in column "G" order to copy information from another workbooks into that row.
E.g. search row contains name "David"
How to simplify this code without loop as I have 100 names to search and thus I will waste my time to create "Do, Loop Until" for 100 names.
I've got a code that stores a variable and then searches for that variable in a different file. When it finds the answer it it jumps over and up and highlights a different cell. The problem now is that I want it to keep searching past where the first result was and repeat this process down the entire column. Here's what I have so far:
Code:
Sub Find()
'
' Find Macro
' Finds a specific key word or phrase from the search box and codes the matches green.
MsgBox "This may take a moment, please be patient."
' This next line establishes the fact that the function will use a variable.
Dim FindClass As String
On Error GoTo ErrorCatch
[code]....
I'm trying to create a function that will search for a certain value and if that true, delete certain cells in the same row. So far, I've come with the following and not sure how to write particular line.
So this function will go through column G and count the rows since it could have 1 or 50,000. So for example if column G2 has a value anything other then "Pending" then I need cell T2:Z2 to be deleted.
I know this line is the source of error Rng("T & Rows.Count:Z & Rows.Count").Select but I don't know how to express it.
Sub Check_Status()
Dim iLastRow As Integer
Dim Rng As Range
iLastRow = Cells(Rows.Count, "G").End(xlUp).Row
For Each Rng In Range("G1:G" & iLastRow)
If Not Rng.Value = "Pending" Then
Rng("T & Rows.Count:Z & Rows.Count").Select
Selection.ClearContents
End If
Next
I have various spreadsheets that get into infinite loops sometimes when I search for things. Hitting break breaks it, and the search window (find all) shows the same exact entry hundreds of times.
This is Excel 2010.
Trying to look for formula for searching through Range and search through Data to achieve expected res
Data Output ExpectedRange
Pune 123 is city Pune 123 Mumbai 999
Maharashtra 345 is state Maharashtra 345Pune 123
India 678 is Country India 678 Nagpur 666
Maharashtra 666 is state OthersPune 555
Below is the query i used for manual search however need formula to see through Range and achieve output expected
=IF(ISNUMBER(SEARCH("Pune 123",A5)),C5,
IF(ISNUMBER(SEARCH("Maharashtra 345",A6)),C6,
IF(ISNUMBER(SEARCH("India 678",A7)),C7,"Others")))
A1’s value is from 1 to 4. I want to write a for loop to copy and paste:
If A1 is 1, copy B1 value to A5.
If A1 is 2, copy B1 value to A15.
If A1 is 3, copy B1 value to A25.
If A1 is 4, copy B1 value to A35.
how can I get this to begin pasting in column 2, row 2?
For i = 0 To Me.ListBox2.ListCount - 1
Set MyCol = MyTitle.Find(what:=Me.ListBox2.List(i, 0), MatchCase:=False)
MyCol.EntireColumn.Copy wbk.Sheets(1).Cells(1, i + 1)
Next i
using Excel 2007. I need a code to identify a worksheet within a workbook by cell/range value. The book is used by various users. They have the rights to add new sheets and all but delete columns in the 'master worksheet'. The sheet names can be changed by the user but I need to rename the master sheet on opening the file. To do this I have put a specific value in a cell within the master worksheet which then should allow me to find the sheet and rename it. (let say Range A1 has a value of "this sheet") I have a mental block on how i can run a loop to search each sheet for the identifying value until the range and value is found and the sheet identified
View 5 Replies View RelatedI have a number of workbooks which contain 62 tabs each. I need a macro that copies specific information from each tab and pastes it to a summary table which will be uplaoded to an access database. I created a macro that works when I manually click on each tab and run the macro. I then added a loop to try and automate. when I run the macro, it loops through all of the tabs, but it only copies and pastes from the first tab, resulting in 62 line items fron the 1st tab. I need to know how to set the active tab to which ever tab the loop is on.
View 5 Replies View RelatedWhat I need is the code for a loop which copies a formula from cells E1 and E2 and then pastes it, staring at C7 and then every 32 cells down until row 20000.
View 2 Replies View RelatedThe formula attached here is in cell J4. I pulled this formula down to J26. Then copy J4:J26 and paste to M2:M26, P2:P26, until CG2:CG26. I need 26 times to paste to the range. There are even 4 columns distance between two pasting range.
How can write a For Loop to copy and paste to these ranges?
=SUMPRODUCT(--($E$4:$E$10004=RIGHT(I$1,2)),--($C$4:$C$10004=$H3),$D$4:$D$10004)
I have a worksheet ("Issues Report"). Based on the value in column A, I'm trying to cut the entire row and paste it on another worksheet ("Closed Issues").
Here's what I've written so far:
Dim C As Range
Dim xlSheet As Worksheet
Set xlSheet = Worksheets("Issues Report")
Set C = xlSheet.Range("A:A")
With xlSheet
For Each cell In C
If cell.Value = "Ready to Close" Then
ActiveCell.EntireRow.Select
Selection.Cut
Worksheets("Closed Issues").Range("A65536").Select
Selection.End(xlUp).Paste
End If
Next cell
This seems logical to me, but it's not working as planned. The code gets hung up on the 11th line of code.
I want to copy range B2:B5 value only and paste it 19 times from B12:B15, B17:B20, B22:B25, and on. The distance between any two pasted range is tow rows.
View 9 Replies View RelatedI have a financial model (attached) which calculates the final cash flows (in a calculation sheet named 9.Operations, rows 428 to 437) for a particular plot. However,the model has a list of 17 plots in the input sheet (3.Input-Plot Details). The macro must change the plot number in the 9.Operations sheet(cell G11), re-calculate the final cash flows and paste all the final cash flows for 1 to 17 plots in a single separate sheet consecutively.
View 6 Replies View RelatedI do have macro which populates sheets based on given list.
I want to paste all data in newly created sheets from "Template".
I do not want to loop 2 sheets ("DATA" & "Template").
Data must be pasted with format & validation. Validation exists on Template sheet only. No other sheet is referred for validation.
I've attached below a small part of my code. I am wondering if there is a way to do this, without copying and pasting something 30 times, but using a loop instead. As you can see there are a series of productsNumbers (30 in total, but this example is for 3). Each productNumber is a string that is actually a 5 digit number, so it can be an integer as well, if it has to.
I would like to code below to loop for as many products as there may be. The way that I have it right now does not work - I feel that I am missing something small or that there is no way to do this.
I have an excel worksheet that has data in columns BA:CX. I want VBA to cut the data from the last row in the worksheet BA:CX and paste the data in the row below it's current location starting with column C:AY. I want to repeat the process for the next row up, etc. all the way until I get to BA:CX in row 2.
View 4 Replies View RelatedI m new to macro and I need to copy the data from 49 cells value which are
present in Two Rows to be converted into TWO columns and 48 rows
I have run a macro for this and I got
Sub Macro4()
'
' Macro4 Macro
'
'
Sheets("WRIGLEY011209").Select
Range("C1:AX2").Select
Selection.Copy
Sheets("Sheet3").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
Range("A1").Select
Sheets("WRIGLEY011209").Select
Range("A2:B2").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet3").Select
ActiveSheet.Paste
Application.CutCopyMode = False
Selection.AutoFill Destination:=Range("A1:B48"), Type:=xlFillDefault
Range("A1:B48").Select
End Sub
Finding the value "OK" in a range of data in Worksheet(1) out of Range("Product"). Ones the value "OK" is found, the entire row is cut and then pasted into a new worksheet 'Range("A3")'. Then the loop sets in and finds the next value "OK" in the range untill it reaches the end of the predetermined Range("Product").
The only problem I have is that the code I have written already performs the process, but when pasting the data into the new worksheet, paste's all of the found rows into the same row. So what you are left with in the new pasting sheet (Worksheet2), is only the last found row because it keeps overiding previously found data. What I need the Macro to do is find the next availible blank row in Worksheet2 and for all values cut out of Worksheet1. Now there was a simular posting to this on the forum, but when I tried it in my code it would not work...
Sub FindAndPaste1()
With Worksheets(1).Range("Product")
Set c = .Find("OK", LookIn:=xlValues)
If Not c Is Nothing Then
firstAddress = c.Address
Do
c.EntireRow.Cut Destination:=Worksheets("Sheet2").Range("A3")
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
End Sub
I also attach the Excel spreadsheet called Product Macro.xls
i have this code
Dim UltFila As Long, i As Integer, k As Integer
UltFila = Range("A65536").End(xlUp).Row
k = 2
For i = UltFila To 2 Step -1
If Cells(i, 2) = 4102 Then
Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1)
End If
If Cells(i, 2) = 4104 Then
Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1)
End If ..................
I'm currently running this macro:
VB:
Sub CopyNextTab()
WorkbookName = ActiveWorkbook.Name
Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm"
2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet"
3. Select the original Workbook and move to the next tab
4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
I'm trying to use a VBA Macro to copy and paste a row of cells from 14 worksheets into in another worksheet in a Colum. The worksheets are entitled Data 1, Data 2, Data 3 and so on until Data 14 and the worksheet that I want to paste the data to is entitled sheet 1. The row of data that I want to copy and paste is in the same place on each worksheet C4 - IR4. I can do this using the Macro recorder but there is a lot of code and ultimately I want this to be part of a much bigger Macro once I get better at figuring this stuff out.
I have read that this can be done by using a Do Until and then using a loop. By the way I am using Excel 2003 with XP.
Simple loop macro.
1) Select/Copy rows 1 thru 35 of column C from "Start" tab.
2) Special Paste/transpose them in row 2 of "Finish" tab (1st 35 columns in row 2 should fill up).
3) Go back to "Start" tab, move exactly three rows down from bottom of previous selection in column C and copy the next 35 rows (rows 38 thru 72 in column C).
4) Again return to "Finish" tab, and special paste/transpose in next row down (row 3 in this case).
5) Continue to repeat this action until all rows of data in column C have been copied and transposed/pasted from "Start" tab to "Finish" tab. Variable number of rows on "Start" tab.