I have a workbook containing a number worksheets. I need to copy one of these sheets and move it to a new workbook before copying and pasting the contents as values and saving as a new worksheet. Ideally the new workbook I'm creating would contain no other worksheets other than the one I'm copying in.
View 3 Replies
I have a workbook with 2 worksheets. On sheet 1 (Roster) is a list of names; on sheet 2 (Summaries) is a set of calculations.
I want to create multiple copies of sheet 2 (Summaries) and name them according to the list of names on sheet 1 (Roster).
Creating and naming the worksheets appears to be working fine. The problem is that the worksheets that are added are blank, not copies of worksheet 2.
My code follows.
i would like to use a macro which copies a worksheet from a workbook to the same workbook and paste it at the end and then renaming it... everything using a macro...
View 9 Replies View RelatedI have a number of Vlookups in sheet1 book A (originally created by someone else). When I use Move or Copy to copy sheet1 to workbook B all the vlookups show as =#N/A. Guess this is a setting somewhere?
View 7 Replies View RelatedI currently have a code that copies (when both workbooks are open) the status report tab from one workbook to another. So, my code copies the entire "Status" tab from Report.12102012.xlsx to Master_Report.xlsx.
But, there will continually be new Report.(DATE).xlsx files that are being made and I would like for my code to be able to search for the newest date "Report" spreadsheet, open it (so employee doesn't have to find the newest spreadsheet), and then copy the "Status" tab to my Master_Report.xlsx file.
All of the "Report.(DATE).xlsx" files will be stored in the same folder.
I have a range of cells (L1:Q1) I want to copy from a worksheet called Email from one workbook and copy it into an already created and saved workbook called 'TDocuments.xls' located in the root of my C: drive.
Thing is I need to paste this range into the first blank row of TDocuments.xls, so it will need to find that first and then paste the values (without formulas) into the TDocuments.xls and save it.
I have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.
View 9 Replies View RelatedTrying to create a new workbook from another open workbook, then copying all the sheets that aren't called "Summary" to that new open workbook and then saving it. I get a subscript error on this line:
[Code]....
All i did was i just created a form to open a workbook from the directories.
Code to copy the data from that recently opened workbook to my workbook where I have my forms. I need to copy that data as in the case that i don't know the workbook and the sheet name i'am going to open as i may open any of the files!!
I have created userform and it works fine. Following code assigned to 'SUBMIT' button in userform - works fine. I am trying to include code where certain data from userform is also copied to workbook2 ( of course without opening it)- as marked in red...below
[Code].....
Please see attached files.
Book1.xlsx
test.xlsm
I am trying to copy the emf image object from "Book1" into the "test" workbook whilst the test workbook is open and Book1 is closed. The code I have put together currently sort of works, I mean that it copies the text data over but does not copy the object which is what I require.
So I basically have a template workbook that the code is stored in. I need it to pull an entire row if Column C in workbook "rawdata" contains specific text, in this case "PRCH - Purchase".I have never had to do anything like this before, it has always been working in the same workbook. It's failing at the 'mp = ...' line every time. There might be other errors in the code too, I just cannot resolve the first one!
[Code] .....
i came up with this..
Sub Copy_To_New_Workbook()
Application. ScreenUpdating = False
Dim strFileName As String
strFileName = Application. GetOpenFilename(filefilter:="Excel Files (*.xls), *.xls", Title:="Please select the excel file to be copied")
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount
So basically I'm creating an entry for every amount in the table.
There is an autofilter applied to worksheet A, I would like to transfer only the autofiltered range from worksheet A to worksheet B, a clear worksheet B statement would also help.
View 9 Replies View RelatedI have created a macro that copys pivot table from one Workbook to new workbook. Problems I am encountering are print selecting from source workbook are not copied to new workbook.
Dim AmountofColumns As Long, AmountofRows As Long
Dim ColumnCount As Long, RowCount As Long
Dim ThisWorkbookName As String, ActiveWorkbookName As String, ActiveSheetName As String
Public Sub CreateGroups()
Application. ScreenUpdating = False
Sheets("Preferences").Select
ThisWorkbookName = ActiveWorkbook. Name
AmountofColumns = Range("A1").End(xlToRight).Column
For ColumnCount = 2 To AmountofColumns......................
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
I am trying to set up a template for my MD to use to calculate budgets and have so far encountered a number of problems most of which i have overcome thanks to help from this forum.
What i am trying to do is have a 'Selection sheet' which contains a number of drop down boxes from which the user can choose several different options.
Based on what they have choosen on this sheet a second sheet 'initial budget' is populated.
What i am trying to do is a formula similar to the following. but i can't seem to get it to work.
I am trying to automate the process of filling out monthly reports and I have run into a problem I just cannot seem to work around.
These reports contain both weekly and monthly information, but because most months do not end on a friday or begin on a monday I have to have a couple of the week reports as partial weeks (e.g. April ended on a Thursday and so that week's report has both April 27-30 and May 1). When the first week of the next month's report runs I would like it to prompt the user to locate the last month's report, open the report, find week 5 of that report and copy the relevant data into the current month's report. (Hopefully that explanation is sufficient)
What I am running into is, after prompting for and opening the past month's report I am trying to select the Range A137:I232 on Sheet5 but instead the previous month's report just opens to wherever it was when it was last saved and won't select any ranges I tell it to, it just selects the range it was on last time it was saved. It will then copy that range and paste it into the Current Month's report.
below is my code ...
I have "wbThis" as the original workbook to be pasted to and "wbTarget" as the workbook that is being opened and copied from. (2 different workbooks). I have written a code for the user to chose the workbook (wbTarget) to open and copying the data from (the getopenfilename). I want to paste these values to the "wbThis" worksheet. The code is running, however it does not copy paste the values from one workbook to another, and it is not giving me an error either.
Code:
Private Sub CommandButton1_Click()
Dim wbTarget As Workbook
Dim wbThis As Workbook
[Code].....
I have one worksheet from which i need to copy only few columns (Ex column A,B, D,G...need not be in sequence.....) to a new sheet.can you please help me to write a macro for this.In addition: Do we need to specify the number of rows in column or is there any way to get data till the end of column automatically.
I have code that i use to copy a worksheet of information in one workbook to a worksheet in another workbook. All i need is some guidance on how to copy a second worksheet from workbook 1 to a second worksheet in workbook 2. Should be fairl straight forward.
In the below i am copying the sheet Phone_data to a second work book sheet also called Phone_Data, i would like to include in the same proccess a sheet called Sur_Data from workbook 1 copy to a sheet called Sur_Data_R in the second. All the other features like find next empty row also apply.
Case: I have 4 worksheets and I want 2 sheets will populate based on the filter value template in the new workbook. I have created the code however I do not know how to copy the other tab follow the filter value template. The other tab only contain general information.
Question is how do you add together the other tab into population of filter value template? I want tsht & csht together in the new workbook.
Option Explicit
sub fillouttemplate()
'from sheet 2 data fill out template on sheet 3 and save
'each sheet as its own file/
dim lastrw as long, rw as long, cnt as long
dim dsht as worksheet, tsht as worksheet, csht as worksheet
dim makebooks as boolean, savepath as string
dim szrelationshipID as string
dim iNumrows as integer
[code]....
I have two spreadsheets LocalTime (saved on everyones local pc)
Admin which is (saved centrally)
IThe spreadsheets are a timesheet to be filled in by all staff.
At the end of the month they will upload the data to the central copy
Which in turn writes the data to a master sheet and removes there name from a list.
I can copuy the data from the Admin sheet (central sheet to the master list and remove the name)
My problem is copying the local copy (certain ranges only) to the Admin version.
I have named ranges and this is one of the problems as when i did get it sort of working it kept asking which range to inclue from which sheet.
Then i sis something and i know get error 1004.
the code i used so far is as follows
Private sub upload_click()
Appliction.ScreenUpdating = False
Workbooks.Open Filename:= _
"C:Documents and SettingsshaunmMy DocumentsDemoAdmin.xls"
Windows("LocalTime.xls").Activate
Range("D6:F6").Select
Selection.Copy
Windows("Admin.xls").Activate
Sheets("Timesheet").Select
Range("D6:F6").Select
I'm attempting to copy the contents of the first row in the "banking center" worksheet into the first rows of all the other worksheets in the workbook. Ideally, I'd like to select from A1 to the last column in row 1 to copy. Edit: Fixed a couple things but still having trouble with the copying section.
View 3 Replies View RelatedIn Sheet1, I have this:
Nos. Items Enter Qty
1 Item1 5
2 Item2
3 Item3 20
4 Item4 50
5 Item5
6 Item6 3
etc...
What I want is, whenever I enter the quantity in Sheet1 it will copy the row in Sheet2, say it will start in row 5 without the blank row and it is something like this:
Sheet2
Nos.Items Enter Qty
1 Item1 5
3 Item3 20
4 Item4 50
6 Item6 3
etc...
I have 2 workbooks, one is called AllData.xls and the other is SavedData.xls. I want to be able to copy only the highlighted data from AllData.xls and automatically populate to SavedData.xls by using a button.
View 9 Replies View Related#in order of priority
#1 So what I want to do is copy multiple rows from a table into another table, but only info from column a,b and c of that row into the other workbook's table. So I need to search for the number that is in E1 of workbook#1 and pull the rows that have that number from anywhere down column E of workbook#2. But I only want the info from cells a,b and c of the rows to transfer over.
#2 Also how to pull that off on all the sheets 1,2,3,4,5,6,7,8,9,10,11 and twelve of workbook#2's column E's into one list in workbook#1.
#3 How to put a button for the macro so if I change the value in E1 I can just hit it to repopulate the workbook#1 with a new list.
#4 How to pull from page 1-12 of workbook#2 but also a workbook#3 as well.
It doesn't produce any errors, but it does nothing. Im trying to copy the data in Column A, B & C from row 3 on to the last row (last row with data in A) from one workbook to another (on the workbook the data is being copied to the data should go into the corresponding A, B and C Columns starting with the first row available in A):
[Code]....
I Have a workbook with 3 worksheets in it, the Sheet named "Costomer info" has the date in cell C15 I then press a button that opens the sheet that requires the date putting in cell G7, I would like it to be automatically inserted when data is inserted to cell C10, so as soon as data is put into C10 the date is copied from C15 and put into G7
