I have a workbook that has quite a bit of data and goes through a lot of processing to arrive and a final summary worksheet. I want to take this summary worksheet and copy the values to a new workbook.
The issue is when I use the following code, it pulls the worksheet into a new workbook with the formulas (which turn to error messages since there is no longer a connection to the data source).
I could lengthen the code to create a new workbook, select the original data, copy, paste values into the new workbook, but that approach seems longer than needed. I'm sure there has got to be a way to copy just the values quickly and simply.
HTML Code: Dim Template As Workbook Dim SourceData As Worksheet Set Template = ActiveWorkbook Set SourceData = Template.Sheets("Summary") SourceData.Copy
At this point I now have a new workbook with one worksheet full of "#N/A" and "#VALUE!". Is there a way I could do something like "SourceData.CopyValues"?
coding a VBA macro for one of my workbooks, in which I need to be able to hide/unhide various rows in one worksheet depending on the value of a cell in a worksheet elsewhere in the workbook. The rows start off hidden by default.
As a simplified example:
Worksheet1 has a cell that has option "Set 1," and "Set 2." Worksheet2 has two sets of rows (say, 20:30 and 40:50) that need to be hidden/unhidden depending on the cell in Worksheet 1. These are hidden to start with!
So if Worksheet1's target cell says "Set 1", then on Worksheet2, rows 20:30 would stay hidden and rows 40:50 would be revealed, and then if the target cell says "Set 2," then on Worksheet 2, rows 40:50 would then be hidden, but rows 20:30 would then be revealed.
I was thinking of using something like this:
Rows("20:30,40:50").EntireRow.Hidden = True If Target.Address="'Worksheet1'!A1" Then If Target.Value = "Set 1" Then Rows("40:50").EntireRow.Hidden = False Else Rows("20:30").EntireRow.Hidden = False End If End If
I think this might work, but every time I try to run this I get various errors, like not referencing my target cell correctly.
I have code that i use to copy a worksheet of information in one workbook to a worksheet in another workbook. All i need is some guidance on how to copy a second worksheet from workbook 1 to a second worksheet in workbook 2. Should be fairl straight forward.
In the below i am copying the sheet Phone_data to a second work book sheet also called Phone_Data, i would like to include in the same proccess a sheet called Sur_Data from workbook 1 copy to a sheet called Sur_Data_R in the second. All the other features like find next empty row also apply.
I have a workbook with ~80 sheets. One sheet is a summary sheet containing data from each of the other sheets. The formula to display the data is pretty easy, but I need a function to copy the formula but increment the worksheet reference in each cell.
For example: the formula in one cell is ='17'!$AI$6 The next cell should be ='18'!$AI$6 and so on...
I have about 12 columns like this, so I really don't want to edit each of them individually.
I have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB: Sub CopyRow() Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0) End Sub
starting to dabble in the VBA coding, now. I tried finding this solution...but nothing quite the same. I have a spreadsheet with a couple tabs. The main tab is a calculation worksheet that pulls in, and performs various calculations on, data from the other couple tabs. This main tab will be the only one that most of my users will see (query and other data tabs will be hidden.)
What this workbook does is calculate accruals for our consultants, at the end of every month (period.) I am trying to put in code that, when activated by a button, will copy the entire main ("Accrual Worksheet") tab as a new tab, at the end of the workbook....as a period backup to the calculations on the main tab.
I created the below =========================================================== Private Sub CommandButton2_Click() Dim LastSheet As Integer Dim aSht As Worksheet Dim Test4 As String Dim NameXists As Long
If MsgBox("Are You Sure You Wish to Finalize? This will copy sheet, without formulas, as backup.", vbYesNo, "Update Confirm") = vbNo Then Exit Sub Else
This seems to work great......EXCEPT (you knew one was coming), I only really want to copy the sheet as data/format only. I don't want the copy tab to have any VBA code, or formulas, on it. I just want a picture image of the "Accrual Worksheet", as reference to the activity for that period. In the following period, the same "Accrual Worksheet" will be used to work on the next month's activities.....and the data on that tab will change. So we need to store the final calculation, for further reference.
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file: Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358 Title: Customer requirement 1 Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example: Requirement1 Title Text Verification Method-Level ... Requirement2 Title Text Verification Method-Level ... Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information. I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I would like to be able to select several non-sequential rows in a worksheet called "Data" (using a check box or just entering a value in Column A) and then be able to press a Command button to copy the selected rows to another worksheet called "Estimate" at the bottom of a table, and delete the designators in Column A (i.e. deletes the value, or unchecks the boxes) so I can repeat the process again if needed.
I have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click() Dim iRow As Long Dim ws As Worksheet
As I am managing a few projects at once, I would like to create a To Dos List for each project (seperated by different worksheets). To make my life a bit easier, I hope to show all the To Dos which is due on a particular day on a separate worksheet. In other words, I am hoping to write a macro which allows me to copy all the relevant To Dos (of that day) from different worksheets and compiled it into a single list on a new worksheet.
1) Each row of To Do contains 3 columns, Date, Priority and Descriptions. 2) The To Dos for each project are NOT arrange in sequence by dates. 3) Number of project will increase over time, therefore the number of worksheets will also increase.
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update() Dim bottomrow As Long Dim My_Range As Range bottomrow = Cells(Rows.Count, "C").End(xlUp).Row Set My_Range = Range("A1:Y" & bottomrow)
I have been struggling with trying to find a way to copy worksheets from one workbook to another. The workbooks change each month. As I was searching the forum for previous threads on this topic, I found this great code, but I need to modify it just a bit and I do not know how to do that. The code allows the user to select the worksheet to import, but it imports it to a new workbook and I need to be able to not only select the sheet to import, but the workbook to import it to.
Though VBA I am trying to copy one worksheet into a new workbook. This worksheet contains Graphs which point to other datasheets in the same workbook.
I first copy the data worksheets, then I copy over the worksheet with graphs. However the graphs link to the original worksheet name- not to the datasheets in the same workbook as the newly created workbook. This is a problem since I am going to send this other workbook to users and they won't have access to the orginal datasheet.
I copy the sheets using the code:
Set wsheet = inbook.Sheets("Division") wsheet.Copy after:=gobjOutBook.Sheets("Executive Summary")
Where the worksheet DIVISION is the worksheet containing the graphs and the data sheets are already copied there.
The macro below copies certain sheets from one workbook to another, however the worksheets are protected in the original but when they are copied to the new workbook the protection is removed. Is there any way to keep them protected once copied?
I also have a couple of buttons with macros assigned to them one of which I would like to remove when the worksheets are copied to the new workbook, is this possible?
Code: Sub REN_REPEAT() ' Rename
Dim myName As String 'Copies the sheets to a new workbook: Sheets(Array("NEW_ORDER_", "CP_NOTES", "DATA")).Copy
I am trying to copy a worksheet called "Survey Extract Agents" from one workbook into another called "Raw Test Data". "Raw Test Data" is also the name of the sheet in the workbook of the same name. I want the "Survey Extract Agents" to be inserted after the "Raw Test Data" sheet. My macro keeps choking on it....