I have a userform with 30 Textbox... (TxtBox1 to TxtBox30)
In my TotalTextbox... i want to count all TextBox1 to TexBox30 that contains Letter "A"
Take note that TxtBox1 to 30 might contains Number or other letter than "A".. all I want to do is to Count all textbox with letter "A" ..
I am trying to set up a worksheet that shows shifts using a Capital "D" and a lower case "d" (one is for a 12 hour shift, the other for only 6 hours). Is there any way to set up a Countif formula that makes the distinction?
View 12 Replies View RelatedI need to get TextBox1 to fill with a number.
Basically, I need the textbox to look at spreadsheet 1 and count the number of times a name occurs in a column given a certain week.
ComboBox3 has the name in it,ComboBox4 has week number
So when I press CommandButton1, the script will look at the week, find all instances in that week, rows, look at the name, then count the number of times the name comes up that week. and return that number to TextBox1.
When I type a single lower case letter into a cell, what formula or conditional formatting should I use to always convert it to a capital letter automatically?
View 9 Replies View RelatedFor the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
=IF(INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0))"",INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0)),"")
I need to change a few hundred cells (one column) where the first letter may be a capital letter to a lowercase letter.
So:
GetAwardfromBid to getAwardFromBid
or
SmallLertter to smallLetter
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I want to apply Data Validation to a cell, so that only the following combination of letters and numbers can be entered.
Letter Letter Number Number Number Number Number Number Letter.
e.g AB123456C.
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedCode:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code:
If isnull(me.comment.value) Then
Exit Sub
ElseIf me.comment.value = true Then
me.comment_date.value = date
me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";"
me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change()
If Me.cmbChooseLevel.Value = "Level 1" Then
Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value
End If
End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.
View 7 Replies View RelatedI have attached my file.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
I'm having trouble referencing a value entered in one textbox to another textbox.
View 2 Replies View RelatedI would like to ask if this is possible, I attached the sample and the problem is there for better understanding of what i want to achieve.
View 14 Replies View RelatedI like the proper formula and find it handy, however do you know if there is a formula that would only keep the first letter in the cell at caps and reduce the rest to lower case, ie
A1 = MY DOG IS WHITE
proper(A1) = My Dog Is White
what I want is only first letter caps = My dog is white. I'va had a decent look around but can't find anything that would do this?
if it possible to produce a letter in excel like you would in word by mail merging.
i dont want to open word as i dont have it on my work pc.
im wondering if it possible to do something like this
dear ( sheet 1 cell 1 )
thank you for your order of ( sheet 1 cell 2 ) we wish to deliver to you on ( sheet 1 cell 3 )
=IF(R16="A",D11,IF(R16="B",G11,IF(R16="C",J11,IF(R16="D",M11,IF(R16="E",P11,0)))))
i want to replace the letter A,B,C,D,E, with numbers from 1-5.
When I take of the """" and replace the letter with the numbers the formula does not work.
What formula would i use to extract the first letter from a persons name - John Paul Smith = JPS
View 7 Replies View RelatedIn the Range "C5:C20" if the user types in S in one of the Cells, I would like the Cell Selection to move three Rows to the right. In other words ActiveCell.Offset(0,3), I need to put this in the WorkSheet Change Code.
View 9 Replies View RelatedI'm trying to list the latest revision of a drawing in an issue sheet spreadsheet. What I need is to be able to enter a formula that will find the highest alphanumerical value in the columns beyond. Alphabetic characters take precedence over numerical - i.e., drawing issue numbers usually follow a 00, 01, 02, 03, then switch to A, B, C, D,... order.
To try and illustrate what I mean a little better, I have the following table, with dates in DD/MM format. Sorry it's not laid out too well, my HTML isn't great:
Drawing title latest revision 01/01 02/01 03/01 04/01 05/01 06/01
example010001AB
example02000102
example0300
I want the cells in the "latest revision" column to report the highest value. So, I want it to say this:
Drawing title latest revision 01/01 02/01 03/01 04/01 05/01 06/01
example01B0001AB
example0202000102
example030000
I won't have control over the numbers and letters reached (i.e., the drawing revision could get up to Z or something - or the number revision reach 15 before switching to alphabetic revisions) so I'd rather avoid having to set up a crazy IF function with "00", "01", "02", "03", "04", etc etc. But -
Can I use a string in VBA just like C. I'm trying to get character one by one for a string. Can I do somehting like that here?
In C I use:
char string[20];
For ( int i = 0; string[i] != '"; i++)
cout << string[i];