I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
Say I have a userform with one textbox and one commandbutton labeled �Cancel�. The textbox has an exit event to edit the data entered to the textbox. The commandbutton has code to unload the form.
The first time the Cancel button is clicked and the textbox has the focus the exit event of the textbox is triggered, but the form is not unloaded.
The second time the Cancel button is clicked the form is unloaded because the textbox no longer has focus.
How can I suppress the exit event from being triggered when the Cancel button is clicked if the textbox has focus?
I have a Userform with a textbox1 and a commandbutton. TextBox1 triggers a code on the exit event. CommandButton1 simply unloads the UserForm. If a user enters data in the textbox, but does not exit and instead clicks the commandbutton to unload the UserForm, the exit event code is still triggered and then for some reason the commandbutton no longer responds to being clicked. I can't seem to find a way around this.
If the commandbutton is clicked, I simply want the UserForm to be unloaded and the exit event for the textbox ignored
What I want to do is have a sub-Function that will check to make sure what is entered into a TextBox is a number, and if it is NOT a number that it changes the color of the TextBox to Yellow.
Currently if the entry is not numeric it just clears the cell and that part is good, but I want the color to flag that the user TRIED to put something there.
I'm doing this as a sub-Function since I need to use this check about 20-25 times.
I have a userform that i have set the showmodal property to false.
This form has a list box that is populated with a huge list of items. I have a textbox in the userform that i use as a filter. so as the user types in something it filters the results in the listbox.
This was working fine but I added to the code to put a tooltip in when hovering over a item in the listbox. (using windows API to achieve).
The problem now is after i type one letter in the text box and it runs the change event it doesnt place the cursor at the end of the textbox anymore to continue typing.
I have tried setting focus to the textbox at the end of the event but nothing happens. I have searched all over the internet with no luck.
I create a series of labels and text boxes at runtime.
Code:
for x = 1 to 10
labelName = "label" & x
Set cControlLabel = Me.frameScrollable.Controls.Add("Forms.Label.1", labelName, True)
next x
How can I assign an on_click event to these? I have seen some rather complicated suggestions such as creating code for each possible object, but there could possibly be hundreds of labels created. It would be nice to be able to call the same macro from each label click, and then take action based on the .caption property of the label.
Is there an event that fires every time anything is clicked within a userform? I have seen the userform_Click() event however, this only works if the userform is clicked directly and not if something like an image is clicked on top of it.
View 1 Replies View RelatedI've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have a MultiPage control that has 67 TextBoxes on it, changes to 14 of these TextBoxes will trigger a public subroutine called TB1Refresh. I have a TextBox and a ComboBox just above the MultiPage control. The ComboBox is set as a MultiColumn. The ComboBox is working. The TextBox is called TB1. The first TextBox on the MultiPage is called TB2. There are no duplicate names on this UserForm. When I scroll though the list in CB1, the values in the TextBoxes on the MultiPage scroll as the they are supposed to. The problem is that every time one of the 14 TextBoxes changes, the subroutine is supposed to fire. Here is the code I use in two of the TextBoxes to fire this sub:
Private Sub TB8_Change()
TB1Refresh
End Sub
Private Sub TB9_Change()
TB1Refresh
End Sub
I put a MsgBox at the beginning and the end of TB1Refresh to see what was happening. They never fired! So the question is, why won't the subroutine fire when called upon to do so. This code was working before I added the MultiPage to this UserForm,
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
I have attached an example set up with a user form I am building. I currently have the first combo box loading upon the initialize of the user form an from that I choose one of the product types and it gives me a list with all product names associated in the second combo box. Upon a change event in the second combo box I want to populate the 3rd Column with the count of how many of that Product type.
I have a couple different code set ups in the attached sheet and neither works.
CmboBxtoTextbox.xlsm‎
I have got some code that is duplacated a few times. It allows only number values to be entered into a textbox.
Is there a way to make a function out of this to cut out the duplication of code.
filling a textbox from a cell using a label click event. I have attached an example.
View 2 Replies View RelatedI have a textbox from the drawing toolbar. When someone changes a cell then clicks in the textbox, Worksheet_Change does not run. If they double click in the cell, that's OK I can capture that event and protect the sheet, stopping them clicking in it. But if they just start typing in the cell, I can't capture that. I have seen some API code which captures keypresses, but it is not practical to use as it loops repeatedly. I could lock the textbox and have the user do something to unlock it, but this is a last resort.
View 7 Replies View RelatedI have a combo box that insert certain information in the row corresponding to the active cell. Apparently the events that trigger the code are generated by the combo box ( change or on click) but pressing any key also triggers the events of the combo box.(this is undesirable)
The following code is excuted even when any key is pressed. Any suggestions on how I can go around this problem? (get this code executed ONLY when a combo box event is triggered)
Private Sub cmbLinkInfo_Click()
'The record is inserted only if the user is inside certain range
'The range is inside the affected links table and between the columns C and F
If (ActiveCell.Row > 25) And _
(ActiveCell.Column > 2) And _
(ActiveCell.Column < 7) Then
'<
Cells(ActiveCell.Row, 3).Value = cmbLinkInfo.List(cmbLinkInfo.ListIndex, 0)
Cells(ActiveCell.Row, 4).Value = cmbLinkInfo.List(cmbLinkInfo.ListIndex, 1)
Cells(ActiveCell.Row, 5).Value = cmbLinkInfo.List(cmbLinkInfo.ListIndex, 2)
Cells(ActiveCell.Row, 6).Value = cmbLinkInfo.List(cmbLinkInfo.ListIndex, 3)
'>
End If
End Sub
Is it possible for a combo box selection, linked to a cell on the same sheet to fire a worksheet change event? I can't seem to find a way to do it.
View 3 Replies View RelatedI wrote some code to validate an inputfield. I want to keep the focus on this field until a correct (numeric) value is inputed. Therefore I use teh beforeUpdate event instead of the afterUpdate event. Some strange things happen (see code below):
1. When I press enter after putting some non-numeric data in the inpBedrag2 field the msgbox is displayed three times in a row. This doesn't happen when the field loses focus by clicking another field (-> msgbox only displays once = correct behaviour)
2. What's really driving me nuts is the fact that the (more or lesse the same sub) works perfectly.
What am I doing wrong? I'm not getting it. Probably I'm doing something very stupid ... but I can't figure it out myself.
As part of a program I'm writing in VBA (for Excel 2010), I have a textbox in a user form used as an interface to write a formula in cells in Excel.The resulting value of a formula from a cell is loaded up into the textbox. It would be shown in the textbox like "See 1.2 and 1.3" where the formula in the cell is
[Code].....
This is just used as an example but the principle is there. It is worth noting that I’m writing this for very inexperienced Excel users but I need them to be able to edit the string part of the formula without breaking the formula.
However where I’m struggling is to pick up a selection change event inside a text box already selected. I need to be able to check if the textbox.SelStart is within an address value or within the string in the textbox.
The event Enter won’t work if the user is already editing the textbox (i.e. typing stuff) and then clicking or using the keyboard arrow to move the cursor somewhere else inside the textbox. I don’t think the event Change is the solution either as it would mean that the user would have already typed something and as a result the formula may already be broken.
I have had a good look around and I didn’t find an event for a selection change inside a textbox. Does it exists and/or is there a way that would have the same result?
So, I have a worksheet with a bunch of combo boxes. The code for the worksheet is below. The issue I'm having is that anytime I drag and drop a cell anywhere on the page, every single control on the worksheet triggers. VB runs through all the code on the sheet, TWICE(I used the debugger extensively trying to find a solution), and causes dozens of successive re-calculations of the entire workbook, which has a couple of tables. This happens on any cell drag-drop on the worksheet, or when I click the command button on the screen.
I have no clue what is causing this. Even more bizarre, it seems to trigger a custom function which is located in a separate module, and isn't even utilized on the worksheet in question. I guess this is because it makes the whole workbook re-calculate?
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
Why this code DOES NOT work:
[Code].....
But this one DOES
[Code] .....
Why would a click event execute but the same code doesnt fire on a initialize event?
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedI Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
Want to tab to next textbox in a userform.
Sample workbook has a userform with 4 textboxes.
When I enter something in textbox 1 and then try to tab to the next box, it tabs within the same box.
Attached sample : Form1.xlsm‎
i have a tabbed userform, that has 13 text boxes on each ,
how can after i have updated one tab unload to a specific cell in excel ?
textbox1 i need value when i "Unload" to b $F$6
textbox2 will be $F$7
textbox3 $F$8
etc etc
but i have no idea how to do this , i have a cmdbutton on bottom ready to unlaod to excel , can anyone start me off on right tracks
also is there a way to when this sheet is opened this userform is shown