I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
Could anyone offer advice on how I would go about accomplishing this task? I'm trying to format two textbox fields on my userform that when the user inputs data into it, it would automatically show the "symbols, dashes and/or spaces accordingling".
The first textbox field (TextBox9) I need to end up looking like this, with the numbers and/or letters changing by user input. example: (MI) A000-000-000-000
The next textbox Field (TextBox10) I need to end up with this type of result: example: (MI ID) A000-000-000-0
I was trying something like this but I'm not familiar enough with the formatting symbols to accomplish this task.
I'm a bit stuck with one of my userforms. I have a username textbox on my workbook logon screen. I have put a max length on the textbox to 7 characters. I have also added a bit of code which stops the user from entering anything less than 7 characters (once the commandbutton is clicked, a msgbox comes up), and the textbox will show text in upper case.
What I would like is a way to "format" the textbox. All of the usernames will be in the following format: BBAAA11. The first 2 characters will always be "BB". The 3rd, 4th and 5th characters will be any combination of letters (for example... "CAM", "EAL", "BEF"). Finally the last 2 characters will always be any combination of 2 digits (for example... "76" "24", "00").
If someone could provide me with some code which will not allow the textbox to type anything other than the specified format, or for a msgbox to appear once the commandbutton has been clicked to say that the incorrect format has been entered, I will be most grateful.
I have a timesheet, with a custom format of [h].mm. In my userform, I have a textbox which I would like to use to enter a time in, but when I run the macro, the time shows up correctly (such as 0.12 for 12 minutes), but it is still calculating as text. I've tried all the various codes I have found throughout the board but nothing has worked so far. I can get as far as making 0.12 minutes show as 12.12.00 AM, but then it shows the whole time instead of the 0.12 which the cell is formatted to do and does not calculate it at the bottom where I grab all the times from that column.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
OK,I have a spreadsheet that prints receiving labels based on received purchase orders that pulls information from an SQL server. The problem is that it is pulling almost 40,000 lines of data to sort and pull at most 30 lines. One of steps is that the purchase order receipt register has a barcode that is scanned into a text box on a userform. Can I use this information to filter the SQL data pull to only grab that PO number? I'm at a loss on where to begin with this. Below is my SQL statement from the Query builder with an example of a PO number input(PO-rma100613).
I have a userform with 10 textboxes which will all contain a time in HH:MM format. Could I have the userform to fill the textboxes with a default value once a time has been entered into textbox1. I would like the default value to be the time from the previous textbox plus 30 mins.
eg. So if I enter 14:00 into textbox1 I would like textbox2 to display 14:30, textbox3 to display 15:00.
If this is possible, could I add a Listbox with the options 1 to 10. Then would I be able to only uses the textboxes based on the number selected in the listbox. So if I selected 2 then just Textbox1 and Textbox2 would have values in them. For 8 being selected then Textboxes 1 through to 8 would be filled.
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”. I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3 If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3 If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code: If isnull(me.comment.value) Then Exit Sub ElseIf me.comment.value = true Then me.comment_date.value = date me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";" me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
I have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change() If Me.cmbChooseLevel.Value = "Level 1" Then Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value End If End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.
I have a textbox that displays text from another cell in the workbook. The other text has some sections in bold, but when it displays in the textbox it doesn't show the bold text - The code I'm using at the moment is below.
Private Sub UserForm_Initialize() Dim R As Long ComboBox2.List = Array("QuestionSet1", "QuestionSet2")
I have textbox1 through textbox8 and all have a number value controlled by their respective spinbutton. The total of those txtbox's adds up into textbox 9, but I currently have a command button to sum the value. would I would like is textbox 9 to update as I'm updating txtbox 1-8 automatically. let me know if possible
After seaching on this and other forums I have not been able to get an answer to this question. Also I know there are a lot of posts out there that sound like this, but none are the same.
My spreadsheet has multiple userforms, which has multiple textboxes. The textboxes are for dates. I have it set so when you double click in the textbox that it calls a calendar function.
Here is the problem.... After you click ok on the calendar form I want the date to go into the textbox that the calendar form was called from. The only way for me to get this to work is to create a seperate calendar form for each textbox that I call the calendar form from.