I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
I have a userform that my staff use to enter the files they are working on. I have a button they click to launch the userform, then they need to input a 'Track Number' the access the details of the file.
Currently, they enter the track number manually that they see from a list on a sheet.
I have found the code below that enables them to click on the file, listed on the sheet and it automatically launches the userform.
What I am after, is the next step, it copies the track number in the cell they click in, but I would like the code to PASTE into the first textbox the copied Track Number.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Selection.Count = 1 Then If Not Intersect(Target, Range("B4:B25")) Is Nothing Then Selection.Copy Application.Run "'FOI & ROI Record Management.xls'!Launch.Launch"
I have a form that is used for updating jobs on a worksheet. I want a txtAssetsJob on the form to display the value that is in a cell in column "E". The row is set up as iRow and is based off of a selection in a cboJobNumber2. Everything else on the Form works great, I just can't get the textbox to display the value.
I have also noticed that I can still put letters into the txtboxes and it copies them to the worksheet. I think I have them formatted correctly.
Code: Private Sub txtAssetsJob_Change() Dim iRow As Long Dim rng As Range
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”. I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code: If isnull(me.comment.value) Then Exit Sub ElseIf me.comment.value = true Then me.comment_date.value = date me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";" me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
I have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change() If Me.cmbChooseLevel.Value = "Level 1" Then Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value End If End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.
I have textbox1 through textbox8 and all have a number value controlled by their respective spinbutton. The total of those txtbox's adds up into textbox 9, but I currently have a command button to sum the value. would I would like is textbox 9 to update as I'm updating txtbox 1-8 automatically. let me know if possible
After seaching on this and other forums I have not been able to get an answer to this question. Also I know there are a lot of posts out there that sound like this, but none are the same.
My spreadsheet has multiple userforms, which has multiple textboxes. The textboxes are for dates. I have it set so when you double click in the textbox that it calls a calendar function.
Here is the problem.... After you click ok on the calendar form I want the date to go into the textbox that the calendar form was called from. The only way for me to get this to work is to create a seperate calendar form for each textbox that I call the calendar form from.
I have a userform and I want a textbox that counts cells J7,M7,P7,S7,V7. Does anyone know how to write this code and where to put it. All I want is the textbox to show how many cells of these five have data in them and I want it to update automatically.
I have an userform say frmNew. In the form, I have three textboxes: txtCost, txtRate, txtSale.
The following two boxes are filled by a user: txtCost contain the Cost of an item (numbers) txtRate contain the % Rate (3 character), i.e. the txtRate can contain only A,B,C,D,E,F,G,H,I and J. The corresponding value is 1,2,....9,0 respsctively. If a user enters any numbners or characters other than A,B,..J, a msgbox should popup with a error message.
The value for txtSale is generated by the Macro i.e. txtSale = (txtCost + (txtCost * txtRate)).
Could anyone offer advice on how I would go about accomplishing this task? I'm trying to format two textbox fields on my userform that when the user inputs data into it, it would automatically show the "symbols, dashes and/or spaces accordingling".
The first textbox field (TextBox9) I need to end up looking like this, with the numbers and/or letters changing by user input. example: (MI) A000-000-000-000
The next textbox Field (TextBox10) I need to end up with this type of result: example: (MI ID) A000-000-000-0
I was trying something like this but I'm not familiar enough with the formatting symbols to accomplish this task.