I don't know what's wrong with this it's not working..
=COUNTIF(SEARCH("radio",A2:A20),"")
i just want to count all the cells from a2 to a20 that has a word "radio" from that cells. Since a2 until a20 have different words like tv power, radio blaster (this should be consider because there's a radio word on it) and so on.
if i use only =COUNTIF(A2:A20,"radio") the word should be exact "radio" and it wont consider the word "radio blaster".
I have a 100 element header row. Each cell represents an account. I want to sum the amounts of each subsequent row if the word "saving" shows up in the header. For instance, there may be "saving 1" "Savings for Xmas" "Savings 2" in the header row, and I want those to trigger the sumif function.
Basically I want something like sumif(B2:B101,exact(left(B2:B101,6),"saving"),A2:A101)
I have a table with three columns, column 1 is a list of names, column 2 is where I want my result to appear, and column 3 has my array of search values. Column 1 and 2 could have any number of rows with values, but column 3 will have less values. It looks like this if it's working right:
Item List
Result
Search List
[Code].....
What I am trying to do is for each cell in column 1, I want to see if there is a matching value in column 3 - it has to be either an exact match or a partial match (i.e. the string appears somewhere in the values of column 1).
I have been trying to use MATCH like this:
=ISNUMBER(MATCH($A2,$C:$C,0))
but it does not return true unless the match is exact.
way to get these partial string matches to work?
1. Counts the number of cells in a column with the same 18-character text string(Full String is 24) using a RIGHT( function.
2. Returns a 1 if there is 1 and a zero if the count is greater than 1.
I am trying to copy partial data from Column A into Columns B and C, then I want to delete Column A without affecting the results in Column B and C. Column A consists of a stock number in the format "1234-56-789-0000" (including the dashes) and is formatted as TEXT.
I'd like to paste the "1234" from Column A into Column B and the "56-789-0000" from Column A into Column C AND remove the dashes (-). I need to do this for the range (or number of rows) that is populated in Column A. This could be as many as 50,000+ rows of data. After this is done, I want to delete Column A. I tried using the LEFT and RIGHT formulas, but they are dependent on keeping Column A intact.
........... A .................. B .............. C ......
1234-56-789-0000 ..... 1234 ..... 567890000
and then eventually like this:
. A ............. B ......
1234 .... 567890000
On occasion, leading zeros in Column C have disappeared, and it's necessary it stay in a 9-digit format. There are 2 additional columns of data, but they shouldn't be affected by the above.
Greetings, I have a particular column containing data similar to:
X24A
X15B
G15A
X23S
I have sorted the data to have all the X marks together, and now I want to run a counter so i can select the data and delete. Following is a sample of the code that is NOT working:
'Delete X Piece Mark Rows
Range("L2").Select
counter = 0
ActiveCell.Select
Do While ActiveCell = "X" & "*" ' This is the line that crapping out
If ActiveCell = "X" & "*" Then counter = counter + 1
ActiveCell.Offset(1, 0).Select
Loop
Range("A2").Select
Range("A2", "L" & counter + 1).Select
Selection.Delete Shift:=xlUp
Range("A1").Select
Right now, I'm trying to find a way to count the number of times a certain phrase appears in a column.
I'm currently using this formula for exact values: COUNTIF(A1:A5,"Hello"), but this only works if an entry in a column is exactly: "Hello"
I want to be able to count a column even if it has more words, such as "Hello how are you" etc., and this column would be counted because it has the word "hello" in it.
I need to get the count of a string from multiple columns. The problem is that string1 exists in column A and String2 can exist in one of eight columns. See the example below.
What I want to do is use two search criteria. I want to find the number of times I have Type=A and if the row has a case Beta. In the example above I should get an answer of 2. (From rows 3 and 9)
I tried countifs but I cant seem to get it working properly.
Attachment 288701
I want to count the number of consecutive text entries in the one column. Skip a certain entry eg: NA, then count the next string of the same entry. eg:
Apples
Apples
Apples
Apples
NA
NA
NA
Apples
Apples
Apples
NA
So the output that I am after will be counting the number of Apples in a row 4 & 3 but skipping NA.
I have a list of around 50000 names. I need to count how many are unique.
I'm looking for the easiest way to count the number of occurrences within a cell range.
The formula that I'm currently using is:
=COUNTIF(D$5:D$8,"a*")
This counts the number of cells that start with 'a' and returns the sum. It seems to work fine, but when I try to make it look for more values in the range it gives me an error. For example;
When I want to find multiple values in the range and count them all, I use this formula:
=COUNTIF(D$5:D$8,OR("a*","b*","c*"))
How would I go about counting the number of times TA shows within strings of text in a range within a sheet. Example: TA,MH in cell A2, CB,TA in cell C40, ES,TA in cell Q19. Result would be 3. Ideally, I'd like the formula to reference a cell that has TA as the look up data such as in A1 I'd have TA.
View 4 Replies View RelatedI need to do a vlookup that takes a string from one cell and then tries to find that string (embedded in a larger string) in the table array
Essentially I imagine this involves the FIND function at some point.
Attached is an incredibly simplified example of what I'm looking for.
This is for Excel 2007,I have two sets of model numbers. One set is the full model numbers of the units we use, and the other is an abbreviated form used to lookup up certificate numbers. I need a way to match these up so I can use one set of search criteria to find out if there is a match. Here is an example of what I need to match with a partial text match:
H,AE35(6,9)36+TD and AE3563636D145C2501AP
H,RE36(6,9)36 and RE36936C145B2505AP
if I could do this with a formula that matches multiple items at the same time (ie; if A & B & C match=true) with the above model number being one of those items (certificate numbers are issued for sets, but the other model numbers are fine).If that's not possible, a one time VBA run to match all of the abbreviations at once would also work. If these items are matched up with a one time VBA, the VBA needs to account for their being more than one match for each abbreviation depending on the size of the unit.
So H,AE35(6,9)36+TD could be matched to:
AE3563636D145C2501AP
AE3563636D175C2501AP
AE3563636D210C2501AP
I have an excel worksheet with about 10K rows of data in column A.
I have also another list of data, about 200 rows of data, in column G.
I need to color each cell in column A that contains, anywere in the string, any of the data strings in column G.
Example:
in column A
row 1: info@duende.com
row 2: rasko@silvester.com
row 3: supportonline@fabius.com
row 4: myhelp@friday.com
in column G:
row 1: help
row 2: info
row 3: support
I need rows 1, 3 and 4 in column A to be colored.
I cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1.
However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
Range
B1 C1 D1 E1 F1 G1
2 7 19 45 22 13
H1 Total of matching numbers in cell range K1:P11
I was given this spreadsheet to count attendance by entering the entry date and exit day, however it's counting the first day and the last. I'm needing it to only count the first day and not the exit day.Book2.xls
View 1 Replies View RelatedI have a date of birth in cell "B13". It's formated as xx/xx/xxxx. I'd like to copy this into another cell where I have annual holidays listed, but, I'd like to have it formatted as mm:dd - omit the year.
View 2 Replies View RelatedI have a cell that contains a string which is always formatted the same. "Dated between Date1 and Date2" I would like to put Date2 into a variable; however, I don't know how to get just that part of the cell.
View 9 Replies View RelatedIs there a way to do a COUNTIF on just partial text?
I know how to count how many cells in a column contain the text "cars" for example, but how would i write a formula that include cells with other text as well?
For example if 55 cells have "cars" as a value and 20 cells have "fast cars" as a value
I would want the formula to count 75.
Basically, it needs to count how many cells cars appears in, in a specific column, regardless of whether its alone in the cell or part of a sentence.
I've tried lookup, match and sumproduct and nothing works.
I have a lot of different values in a column B, I would like to find last value in a column that begins with "KBI-", all values have 8 characters. Eg.:
GJK-4654
SDF-4655
KBI-0102
K18-4654
KBI-0202
KBI-0103
RTI-0102
The Value I would like to retrieve is KBI-0103.
In cells A1:A10 I have the following list;
FLOUR
DOUGH
CHICKEN
BEEF
PEPPERS
TOMATOES
CHEESE
ONIONS
POTATOES
SALAMI
I want to be able to get a partial match that will allow for spelling mistakes by the user. The wild card (*) seems to only look at the left-most text and return #N/A if the text isn't matched sequencially.
For example ....
Is there possible filter a partial number in column?
i have many values in column, i want enter partial value in Texbox (ActiveX).
if i enter in textbox 6840.
Result
64801000
64802000
64803000
##############
if i enter in textbox 5480.
Result
54801002
54802002
54801000
54802000
54801001
54802001
54801005
###################
I have a column with a different alphanumeric strings in each cell. Some of these values have a portion that is common. For e.g.:
Example kealey 1980
Testing
Reference
Example john commission
Example (hard sell)
Is there a formula to return the number of cells that have "Example" in them?
column A
MARY
JOHN
MARK
SUE
cell B1
zzzJOHNxx
I am looking for a formula (Vlookup, Match, etc) that will look for an entry in column A that matches part of the string in cell B1 (not the other way around i.e. using wildcard)
How do you do a vlookup with a partial match?
View 5 Replies View RelatedI have one list of waybill numbers which are 12 digits long and I have another file of waybill numbers which are 15-16 digits long. I have tried a VLookup but I do not get matches on these since the digits are not the same length. Is there any other formula I can use to match a 12 digit waybill against a 15-16 digit waybill number? I am assuming that if 12 digits match in both lists that it is an exact match.
View 4 Replies View RelatedI have data below, what I am trying to do is to put an "x" if the data has a partial match. This is what I am using below.
HTMLSheet1 ABC1G. Washington SchoolGEORGE WASHINGTON SCHOOL 2Electrical Magnet SchoolELECTRICAL 3Sports Magnet SchoolCOLUMBUS SCHOOL 4JonesJONES SCHOOLx5J. StrongSTRONG SCHOOL 6Abe Lincoln SchoolLINCOLN SCHOOL 7HarrisonHARRISON SCHOOLx8Abe Lincoln SchoolLINCOLN SCHOOL 9Abe Lincoln SchoolLINCOLN SCHOOL 10Abe Lincoln SchoolLINCOLN SCHOOL Spreadsheet
[Code] ...........
What I would like is this
HTMLSheet1 ABC1G. Washington SchoolGEORGE WASHINGTON SCHOOLx2Electrical Magnet SchoolELECTRICALx3Sports Magnet SchoolCOLUMBUS SCHOOL 4JonesJONES SCHOOLx5J. StrongSTRONG SCHOOLx6Abe Lincoln SchoolLINCOLN SCHOOLx7HarrisonHARRISON SCHOOLx8Abe Lincoln SchoolLINCOLN SCHOOLx9Abe Lincoln SchoolLINCOLN SCHOOLx10Abe Lincoln SchoolLINCOLN SCHOOLxSpreadsheet FormulasCellFormulaC3=IFERROR(IF(SEARCH(A3,B3),"x",""),"")C7=IFERROR(IF(SEARCH(A7,B7),"x",""),"")
I am trying to create a lookup table that will lookup parts of a colum and return the second column in the table. For example, column A has a lot of different titles in it, they each contain different segments and codes in them but I need to see if NM is in the list and if it is I want to return a 1.
Column A Lookup COLUMN Lookup Result
NM01A NM 01
NM02B IN 02
IN01A
IN02B
I need to see if what is in the lookup column is in column A, and if it is then I need to return the lookup result.
I am doing the partial lookup to get the total amount based on a certain criteria.
For example in sheet1 there is a table and on sheet2 I have to pull out the data from sheet1.
Column A
Column B
Provision of Maisie System User -
56988.89
Provision of Maisie System User - first 12 free
7451.78
Provision of Maisie System User - first 12 free (rebate 1 May 08)
-487.25
[code]....
The formulas which i m using is =VLOOKUP("*"&$A$2&"*",$A$2:$B$10,2,0). Its giving me the first value as there are duplicates i need the total sum. For example:- Maisie amount which i m getting is 56988.89 but i want total maisie amount which is 56501.64.