I have a table with three columns, column 1 is a list of names, column 2 is where I want my result to appear, and column 3 has my array of search values. Column 1 and 2 could have any number of rows with values, but column 3 will have less values. It looks like this if it's working right:
Item List
Result
Search List
[Code].....
What I am trying to do is for each cell in column 1, I want to see if there is a matching value in column 3 - it has to be either an exact match or a partial match (i.e. the string appears somewhere in the values of column 1).
I have been trying to use MATCH like this:
=ISNUMBER(MATCH($A2,$C:$C,0))
but it does not return true unless the match is exact.
I don't know what's wrong with this it's not working..
=COUNTIF(SEARCH("radio",A2:A20),"")
i just want to count all the cells from a2 to a20 that has a word "radio" from that cells. Since a2 until a20 have different words like tv power, radio blaster (this should be consider because there's a radio word on it) and so on.
if i use only =COUNTIF(A2:A20,"radio") the word should be exact "radio" and it wont consider the word "radio blaster".
I have a 100 element header row. Each cell represents an account. I want to sum the amounts of each subsequent row if the word "saving" shows up in the header. For instance, there may be "saving 1" "Savings for Xmas" "Savings 2" in the header row, and I want those to trigger the sumif function.
Basically I want something like sumif(B2:B101,exact(left(B2:B101,6),"saving"),A2:A101)
I have been trying to set up a macro to find the Minimum and Maximum values from an array of temperatures for painting... so far, partially successful.
The problems I am having are that the values have 1 decimal place and can be anywhere between 22.7 to -1.4. When they come they are put on the spreadsheet, the MinTemp can be 10.0 and MaxTemp 9.9, totally reversed.
Dim Info(2000, 2) As String Dim MonthValue(31, 9) As Variant Dim Working1 As Date Dim I As Integer Dim J As Integer Dim Tot As Integer
I'd like to know if exist a procedure/ function to find a argument in an array and return the index/address of the argument at the array.
For example, I have a array contaning a list of products. i'd to create a function that finds the index of a particular/list of products, feeded as arguments, and returns the indexes locations.
I am trying to copy partial data from Column A into Columns B and C, then I want to delete Column A without affecting the results in Column B and C. Column A consists of a stock number in the format "1234-56-789-0000" (including the dashes) and is formatted as TEXT.
I'd like to paste the "1234" from Column A into Column B and the "56-789-0000" from Column A into Column C AND remove the dashes (-). I need to do this for the range (or number of rows) that is populated in Column A. This could be as many as 50,000+ rows of data. After this is done, I want to delete Column A. I tried using the LEFT and RIGHT formulas, but they are dependent on keeping Column A intact.
........... A .................. B .............. C ...... 1234-56-789-0000 ..... 1234 ..... 567890000
and then eventually like this:
. A ............. B ...... 1234 .... 567890000
On occasion, leading zeros in Column C have disappeared, and it's necessary it stay in a 9-digit format. There are 2 additional columns of data, but they shouldn't be affected by the above.
Column A has prepopulated list of values of various lengths, no spaces. Need to search column A for certain values at the END of each text string, and then populate the cell right next to it with another constant value.
Example: macro searches column A for cells with "123" at the END of the cell value (whole cell value could be A123 or ABC123, etc...). When macro finds the cells that meet this criteria, it places the constant value "XYZ" in column B right next to the cell in col A.
I need several variations on this theme and the # of characters being searched for at the end of each text string can vary. The constant value to be inserted in Col B can also vary. I imagine 'For Each' loops for every variation would work, I just do not know how to write the code for searching the "end of the text string" part of it
I have a combination of letters and numbers in a column. For example.
xx1234567x 1234567xx xx1234xx1234
I need a formula to tell whether they begin with two letters and have a certain number of numbers then end in letters. Or have letters in the middle. Sorry Im so vague, I just need a start in the right direction. Ideally combined with an IF statement.
In english (If two letters afetr nine numbers then yes)
I am trying to do a sort of index match thing using VBA. What I am attempting to do is to use the prefix of a long number and try to find that exact prefix in a string array, and output that string array value. So this is what I have so far as a test:
[Code].....
So I can match the text exactly so if I put PREFIXB in cell A1 in this example, i will get the msg box saying "YES", but if I make it PREFIXB1231k4j3jj1kj32cj, it will display "NO". I want to get it so that PREFIXB will be displayed in the cell that I put the formula in. So if A1 = "PREFIX1AAA100CF" and cell B1 = "=ABC(A1)", cell B1 will display "PREFIX1AAA".
Now the thing is that these prefixes can have different lengths, but will never encompass the exact prefix of another. So if I had a prefix of: PRE1AB, I won't have a prefix of PRE1A.
I am looking for a formula (Vlookup, Match, etc) that will look for an entry in column A that matches part of the string in cell B1 (not the other way around i.e. using wildcard)
I have a column of one to three digit numbers (I5:I34), some of which contain an asterisk after them. In I35 i want a formula to find the highest value from that column. Additionally, if two numbers in the column are the same value, but one contains an asterisk after it, it should use that value in I35, instead of the one without the asterisk.
I wish to search for a substring within an array of strings and just return back an indication that the substring exists withing that array.
so for instance let the substring be "rang" and let the array be {"apple","orange","lemon"}. I wish to put a single command line next to my substring and wish to search through that range and return a key code if it exists. And then I will repeat the same search for other substrings. For the moment being, I don't care too much about the number of occurences or the exact cell address where they occur. All I wish to know is whether they exist in that list or not.
So it looks to me it is like a SEARCH command but except on a range of text (Rather than a single text) with an array formula. I have tried MATCH but my case is not an exact match either.
I need to declare a two dimensional array that will return the Row and the cell's string value. My only solution is to return the row as a string like this.
Public GlobalArray(2, 100) As String
How to get more control than this? Maybe I should just declare it as a variant but this might open it up for problems later.
which i am using to map columns between spreadsheets. The basic numeric entries refer to columns to copy. But I want to make the routine smarter with the strings.
If array(x) = 12 (For example) Then Do something End If If left(array(x),1) = "=" Then Do something Else End If If array(x) Is String literal (e.g "xyz" Or "123") Then Do a third thing End If
i cant find a typeof or isstring kind of function. Isnumeric works ok for some values but quoted numbers (eg "123") return true (which isnt what i want). I have tried the left(string,1) = """ but excel seems to hide the quotes.
I have a worksheet with 2 tabs. Tab 1 has data in two columns, column A contains a part number (6 characters long) and column B contains a value for each part number.
Tab 2 is a sheet with multiple colums of data. I need tab 2 to look at the data in tab 1 and display the value of each part number in a specific column that has corresponding part numbers but are 15 characters in length. The part numbers in tab 1 are the last 6 characters of the part numbers in tab 2.
I have been trying to use vlookup in tab 2 but it won't work because the column of part numbers in tab 2 is a full part number and the part numbers in tab 1 are only a partial part number (last 6 characters of part number in tab 2).
Tab 1 is a worksheet that is created from a Access query of a sql database. I cannot control the abbreviated part number that the query generates.
Tab 2 part numbers (the full 15 character number) also is generated from another access query which I also can't control.
Is there any way I can have tab 2 sheet look at the data in tab 1 and display the values for the part numbers in tab 2.
What I'm trying to do is generate a 2D array of values in VBA from data in a spreadsheet. (Array is not pulled from sheet)
What I would like to do next is look at each row or column of the 2D array and find the max value. I've tried using the worksheetfunction.MAX to no avail.
I've attached a sample document of my data layout. On the Compare tab, I'd like to build a sumif formula that takes the data in column B and uses it to reference the other tabs without having to use a large nested IF statement. For example, on the Compare tab, in cell C2, the formula will know to look at the "JAN MONTH" tab because B2 says "JAN", then the rest of the sumif would be looking at the data in column A and matching it with the data in column A in the correct tab.
i have a sheet in template i use in preparing bid packages for electrical installations.it relates to locating in a (building) grid the locations of the motor control (mcp) and power panels (cdp).my desire at this point is to find a way to local a unique value (mcp or cdp) in a 2d grid and then return the column and row names from the same grid. eventually this information will populate a table of all the mcp's and cdp's with their locations.
my sticking point appears to be finding a unique value in a 2d table. this value can be anywhere in the table, not just the first column.
i've tried the lookups and index/match. match fails when i extend the lookup_array beyond the first column. not sure if this is even possible.
I have list of strings to be searched in column A2 to A150 (A1 has column title). The array that needs to be searched is in B2 to AG1000 (B1 to AG1 has column title). I want each string in column A to be searched in the full array. If match is found the corresponding column title (B1 or C1 and so.) and cell address needs to written to a new result columns in AY and AZ. it should work for duplicates as well i.e. the string can be in all the columns of array from B to AG. and all of them needs to be written to result column.