I want to loop through a list of numbers and add a hyperlink to each number. This hyperlink refer to a sheet with the same name as the number. how I shall use hyperlink line below. The loop and everything else is ok. I use a loop like the one below and want to refer the Hyperlink to activecell each time
View 2 RepliesIn column A I have a range of file path extensions (i.e., C:UsersJSmithDocumentsModelsHic Sunt DraconesTest.xlsx). What I want is a macro that will use those file path extensions to create hyperlinks in column B.
So far this is what I have:
VB:
Sub Hyperlink()
Range("a1").Select
ActiveSheet.Hyperlinks.Add Anchor:=Selection, Address:=Range("b1").Value, SubAddress:= _
"", TextToDisplay:="Link"
End Sub
This code works for the first cell, but does not work for the rest of the cells in the range. Also. Keep in mind that the range of cells in column A is dynamic - it changes in length.
I currently have a macro that uploads information on a daily basis for hours worked on campaigns per employee. It then converts the data into a pivot table where it uses relative references to copy the total from the bottom and paste them on to another worksheet. I am now trying to use hyperlinks to link the total back to the pivot table. With daily updates though, the data is constantly being pushed down and is located in a new cell each time. How can I get a hyperlink to work for an area thats constantly changing?
View 9 Replies View RelatedThis code finds and matches the Text value of a Shape to the value of a cell on seperate worksheets within the same workbook.
View 9 Replies View RelatedI would like to set up an index sheet the will contain hyperlink to all the other sheets. Is a new sheet is added or deleted the index sheet must be updated
View 5 Replies View RelatedI am trying to place a hyperlink on each worksheet to an Index worksheet. This is what I come up with so far, and it does not work.
Code:
Sub CreateIndexHyperlinks()
Dim ws As Worksheet
For Each ws In Worksheets
ws.Hyperlinks.Add Anchor:=ws.Range("H1"), Address:="", SubAddress:="Index", TextToDisplay:="Back to Index"
Next ws
End Sub
It successfully puts the words "Back to Index" into cell H8 of every worksheet, but this cell does not link back to the Index sheet (which is called "Index"), the way I want it to.
I don't really understand the Address and SubAddress part of the argument for the Hyperlinks.Add method. I am guessing the Address part is "" because I am linking to a place in the same workbook. Is that right?
I tried changing the SubAddress to Worksheets("Index") and Worksheets("Index").Range("A1") but that just resulted in an error message.
I am trying to further automate the process of formatting my financial statements and am hoping someone might get me on the right track here. Currently I create 2 sheets, one called "MMM YYYY" (i.e. month year) and another called "General Ledger".
The process I am currently doing manually is creating a link between each line item on the financial statement and its GL account information on the General Ledger tab.
The description of each line item on the financial statement (the MMM YYYY tab) matches the GL account description on the General Ledger tab with the exception that the GL account description starts with the GL account number and then the description.
For example the "Utilities" line item on the financial statement needs to link to a line on the General Ledger tab that is "7071-45 Utilities".
In my mind I see the macro saying go to the next line and read what it says. Now go to the General Ledger tab and look for something that says the same thing excluding any preceeding numbers and make a hyperlink.
If it helps, I've uploaded a sample of one of the statements as I currently do them with the hyperlinks already set up. There are not any macros in this spreadsheet. If you'd like to take a look at it, you can get it here: ....
I have a list of file names sans extension in column A. I want to search a folder I specify and if file is found create a hyperlink to said file either in a new cell or in column A.
The code I have does the search fine, but its hyperlinking is offset and I can’t get it to match the link to the file name.
Also it breaks if it can not find the file.
Here is the code...
I tried to learn VBA about 4years ago, so my knowledge as died. I hope this question has not come up before, i did do a search before. I wish to create a new hyperlink based on a activecell eg. A1=SN0001 then hyperlink will be SN0001. Only thing i can remember how to do is record marco, but ofcourse copying the cell will return a hardcoded value.
ActiveSheet.Hyperlinks.Add Anchor:=Selection, Address:="1"
Where address is :="1" how do i paste the activecell. I have 9000 cells to hyperlink.
I need to make a Workbook that has hyperlinks in the first sheet that links to a cell in a second sheet and then back again. The only way I have been able to do this is manually create each link in each sheet. I am hoping that this process can be automated as they can not be 'filled' as far as I can see. find attached an example of what I am trying to achieve.
View 2 Replies View RelatedCreating email drafts with the use of VBA in excel.
I've used some of his code to create an email draft to send a particular range within my excel spreadsheet. The trouble I'm having with it is keeping the hyperlinks within each cell in the range which will take the user to a particular website. How do I keep this formatting when the range is copied into the body of the email.
Example Cell A10 = HYPERLINK("URL","Google")
The hyperlinks are lost. How to keep these? Here is the code
Sub Mail_Selection_Range_Outlook_Body()
Dim rng As Range
Dim OutApp As Object
Dim OutMail As Object
Set rng = Nothing
On Error Resume Next
Set rng = Range("EmailRange")
[Code] ........
Can't seem to attach sample Widgets.xls. I need a macro to take the heading (note heading not sheet name) from each worksheet on a workbook (or from a range of nominated worksheets in case I don't want to index the first or last few sheets) and use it as the Description for a Index entry on a nominated sheet e.g. Sheet named 'Index'. In addition that each Description is also a hyperlink back to the sheet with the heading. In this way users can click between each entry on the index to go to the sheet and then click on the heading on the sheet to go back to the index.
Index Sheet
M21, M22 and M22-A BICYCLES1
Q21, Q22 and Q22-A BICYCLES2
R21, R22 and R22-A BICYCLES3
Taking this one step further I ideally want to save this workbook as a pdf and the hyperlinks to remain.
I have two sheets. Sheet A has a list of folders. This list is updates dynamically every time the sheet is opened. I have another sheet (sheet B) which has a list of all the files in the sub-folders, listed with the folder name at the top of the column and the files within in the column underneath with hyperlinks to them. The goal is to be able to navigate to the folders on sheet A and to click there to go to the column where all the files in that folder are linked to. What I need is a macro that will search a column and for every cell that has text in it and create in the column directly to the right a hyperlink to the appropriate cell in the top row in sheet B that has the same name as the text in the cell on sheet A that it finds. I already have the macros for listing the folders on sheet A and the macro for listing all the files in the sub folders in sheet B and they work fine. The goal is a link list which is dynamic and that recreates itself no matter what I add to the folders.
For instance, let’s say there is a folder timesheets. If I add a sub-folder called
accounting to the folder Sheet A scans then timesheets would be bumped down one spot on the list, so the macro has to look dynamically for the text in the column on sheet A.
Also the addition of the new folder would move the order of the columns on sheet B, since both lists are alphabetical. So the link generation macro would need to search row 1 of Sheet B to find the match for the text in the cell to the left of where the link would be generated and create a link to the top of that column. I’ve looked all through the site and not found something that I can even modify to do what I need.
i'm trying to automatically create hyperlinks in some cells from mail addresses located in another column. this is what came out:
View 2 Replies View RelatedI need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:
[Code] .........
You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.
FC_Macro_Sample.xlsm
Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
View 2 Replies View Relatedi have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies View RelatedI have a spreadsheet and within the first sheet there are lots of hyperlinks to other cells within sheet 1 (my template).
I have made a small macro which very basically makes a copy of sheet 1 (my template)
The hyperlinks in the template are explicit and as they are copied to sheet two, they still reference back to cells in sheet 1. I need the hyperlinks to be relative, so that when I make a copy of the template the hyperlinks are copied and make reference to cells in the new sheet. I cannot work out how this should be done
I have an excel sheet that will have a column with out of sequence numbers. I need a script that will evaluate each row and insert a row and the missing sequence. Below is the code I have written but I keep getting a compile error saying Else without If.
View 4 Replies View RelatedI'm sure this is easy but I'm trying to create a for...next loop that goes across the row. My final output will be basically be to see if the cell says Saturday or Sunday and offset by 2 rows and highlight the rest of the column.
Code:
Range("A1").Select
For X = 2 To Range(Activecell, Selection.End(xlRight)).Column
Range(2, X).Select
ActiveCell.Value = "Column"
Next X
That's what I came up with but it doesn't seem to be right.
how to adjust this code.
What I want is a loop.
Highlighted in red near the top is cell a1, this needs to change to a2 then a3 then a4 and so on for as many times as i need it to.
highlighted in blue near to the end of the code is cell a1,this needs to change to a41 then a81 then a121 then a161 and so on(so +40)for as many times as i need it to.
Code: ...
i would like to create loop throug among columns, is xlup or xldown methods will make sensne ?
View 2 Replies View RelatedI have a piece of equipment that dumps data into excel that looks like this:
#1 Asset
#1 Widget
Component1
Horizontal
0.017893
2/21/2014
5
[Code] .......
This order goes on and on for hundreds of rows with different widgets and different components.
I am trying to find write a macro that will sort the data to be summarized into a table like this:
#1 Asset
#1 Widget
Component1
Horizontal
0.017893
2/21/2014
5
[Code] ........
I have been trying to create new worksheets, name them and create webquery according to the input on table B4:C13 in test1 sheet attached (code is in module 1). After I run the code it stops after creating sheet with name 1 and shows error 1004. here it is the
View 8 Replies View RelatedI've got a data set (words and text) where in column J the number 100 appears at random intervals. Each time the number 100appears, i want to take all data from cell A:J and copy that data to a new worksheet and then name it with the word in cell A.
View 7 Replies View Relatedi created list in Excel and i wrote into (a1 cell-income, b1 cell-expence, c1 cell-kredit and d1 cell-debet). i enter a2 cell income (for ex:1000) and b2 cell expence (for ex: 100) and I give condition in VBA that if income greater than expence then VBA writes a2.value-b2.value into d2 cell else if expence greater than income then it writes b2.value-a2.value into c2 cell but i only define this one row (for ex: c2, a2. b2. d2).
i would like to assign it the rows as long as i want
that is i would like to create loop
(for ex: a(i), b(i) and so on
here is
I am trying to create a loop to add multiple worksheets
I want to add a new sheet for each company (A2:A14)
I am also wanting to add the sheets after the current last sheet if possible.
Sub addnewsheet()
x = 2
Do Until Cells(x, 1) ""
Sheets.Add.Name = Worksheets("securities").Cells(x, 1).Value & ".ax"
x = x + 1
Loop
End Sub
I am trying to do payslips. Basically I have one worksheet with about 7 columns. I have a 2nd worksheet that is like a template payslip.Worksheet 1 has hours worked and pay etc.
I want to find a method to loop through worksheet 1 and using worksheet 2 as a template create more worksheets and have the values come from worksheet 1 in the new worksheets.
I keep getting errors with this vba code. I'm trying to make 10 new worksheets with the name of each worksheet in the Newname array. I'm trying to put the same formula (with the difference that each formula would take from a different "Newname" file. I'm trying to put first formula from A1 to A 560 and second formula from B1 to B 560.
Sub Namesheetformula()
For x = 1 to 10
Newname = Choose(x,"A","B","c","d","e","f","g","h","i","j")
Firstformula = if(isna(match('Master!'A1,'Newname'!A1:A560,0),"",'Master'!A1)
[Code] .....
I am having an issue with looping through data ranges. Below is a subset of my macro. What I require is for LegendRng to stay the same and DataRng to move after each loop.
However everytime the vba runs through a loop, the previous range is recorded i.e. the source data for the chart is "A1:D5" instead of "A1:D1, A5:D5").
[Code] .....