how to adjust this code.
What I want is a loop.
Highlighted in red near the top is cell a1, this needs to change to a2 then a3 then a4 and so on for as many times as i need it to.
highlighted in blue near to the end of the code is cell a1,this needs to change to a41 then a81 then a121 then a161 and so on(so +40)for as many times as i need it to.
Code: ...
I need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:
[Code] .........
You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.
FC_Macro_Sample.xlsm
I have an excel sheet that will have a column with out of sequence numbers. I need a script that will evaluate each row and insert a row and the missing sequence. Below is the code I have written but I keep getting a compile error saying Else without If.
View 4 Replies View RelatedI'm sure this is easy but I'm trying to create a for...next loop that goes across the row. My final output will be basically be to see if the cell says Saturday or Sunday and offset by 2 rows and highlight the rest of the column.
Code:
Range("A1").Select
For X = 2 To Range(Activecell, Selection.End(xlRight)).Column
Range(2, X).Select
ActiveCell.Value = "Column"
Next X
That's what I came up with but it doesn't seem to be right.
I want to loop through a list of numbers and add a hyperlink to each number. This hyperlink refer to a sheet with the same name as the number. how I shall use hyperlink line below. The loop and everything else is ok. I use a loop like the one below and want to refer the Hyperlink to activecell each time
View 2 Replies View Relatedi would like to create loop throug among columns, is xlup or xldown methods will make sensne ?
View 2 Replies View RelatedI have a piece of equipment that dumps data into excel that looks like this:
#1 Asset
#1 Widget
Component1
Horizontal
0.017893
2/21/2014
5
[Code] .......
This order goes on and on for hundreds of rows with different widgets and different components.
I am trying to find write a macro that will sort the data to be summarized into a table like this:
#1 Asset
#1 Widget
Component1
Horizontal
0.017893
2/21/2014
5
[Code] ........
I have been trying to create new worksheets, name them and create webquery according to the input on table B4:C13 in test1 sheet attached (code is in module 1). After I run the code it stops after creating sheet with name 1 and shows error 1004. here it is the
View 8 Replies View RelatedI've got a data set (words and text) where in column J the number 100 appears at random intervals. Each time the number 100appears, i want to take all data from cell A:J and copy that data to a new worksheet and then name it with the word in cell A.
View 7 Replies View Relatedi created list in Excel and i wrote into (a1 cell-income, b1 cell-expence, c1 cell-kredit and d1 cell-debet). i enter a2 cell income (for ex:1000) and b2 cell expence (for ex: 100) and I give condition in VBA that if income greater than expence then VBA writes a2.value-b2.value into d2 cell else if expence greater than income then it writes b2.value-a2.value into c2 cell but i only define this one row (for ex: c2, a2. b2. d2).
i would like to assign it the rows as long as i want
that is i would like to create loop
(for ex: a(i), b(i) and so on
here is
I am trying to create a loop to add multiple worksheets
I want to add a new sheet for each company (A2:A14)
I am also wanting to add the sheets after the current last sheet if possible.
Sub addnewsheet()
x = 2
Do Until Cells(x, 1) ""
Sheets.Add.Name = Worksheets("securities").Cells(x, 1).Value & ".ax"
x = x + 1
Loop
End Sub
I am trying to do payslips. Basically I have one worksheet with about 7 columns. I have a 2nd worksheet that is like a template payslip.Worksheet 1 has hours worked and pay etc.
I want to find a method to loop through worksheet 1 and using worksheet 2 as a template create more worksheets and have the values come from worksheet 1 in the new worksheets.
I keep getting errors with this vba code. I'm trying to make 10 new worksheets with the name of each worksheet in the Newname array. I'm trying to put the same formula (with the difference that each formula would take from a different "Newname" file. I'm trying to put first formula from A1 to A 560 and second formula from B1 to B 560.
Sub Namesheetformula()
For x = 1 to 10
Newname = Choose(x,"A","B","c","d","e","f","g","h","i","j")
Firstformula = if(isna(match('Master!'A1,'Newname'!A1:A560,0),"",'Master'!A1)
[Code] .....
I am having an issue with looping through data ranges. Below is a subset of my macro. What I require is for LegendRng to stay the same and DataRng to move after each loop.
However everytime the vba runs through a loop, the previous range is recorded i.e. the source data for the chart is "A1:D5" instead of "A1:D1, A5:D5").
[Code] .....
i have a range of rows that change (could be 10-100) how do i loop the range to create new worksheets named for each row?
View 3 Replies View RelatedI am trying to create a loop which stops once a cell is empty.
Assuming I have declared proper DIM, my code is
Row=1
Do
Row = Row + 1
SheetName = Cells(Row, "A")
Sheets.Add.Name = SheetName
Loop Until IsEmpty(SheetName.Offset(1, 0))
I have a folder with 20 Excel files. I'm trying to create a master list of all the tab names. I can see all of the files opening, but it only copies some of the names.
VB:
Sub GetTabNames()
Dim wkBook1, wkBook2 As Workbook
Dim stFilePath1 As String
Dim FileList(1 To 18) As String
Dim iLoopSheet, iLoopProg As Integer
Application.ScreenUpdating = False
[Code] .....
Trying to create a simple loop that will change the visibility of a large quantity of CheckBoxes when a certain value is selected within a ComboBox . I'm very new VBA programming and loops are not something I've tried yet. My code currently is this:
[Code]......
When I run it, I get a "Compile Error: Invalid qualifier".
I am trying to design a function that grabs an average of only numbers that are within a certain deviation of the mean. I got the plan down, and have done this before without VBA, its just a user defined function will be much quicker.
The gist of what I am doing: Find the standard deviation of a range and then only find the average of numbers that fall within n deviations from the mean. I am stuck with the part that I would normally use an array code for. Here is what my array would look like:
{=AVERAGE(IF((nums>high)*(nums
I am looking to create a number of series on a chart (xyscattersmooth) from a datatable. Below is my data Table....
View 9 Replies View RelatedI’m getting data from query. My data has fields: Item No, Customer ID & Sales rep.
I need to find out for each Item number which customer put order and who was the sales rep. (Excel 2002). see file attached.
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
I want to open C:Projects
and for each Project in Projects, create a new folder with the actual month (e.g. "03" or "12")
Im running the Makro from a file where I'd like to put the month in a cell -> so the code refers to cell("A1") wich has value 01 and creates a folder "01" in every projectfolder in C:Projects
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies View RelatedI have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
text
1
text
text
[Code]....
