I have a FOR loop which is supposed to loop through all the worksheets in my workbook, create a named range, then add some data to the right of the range. However, when I run my code, all the named ranges refer to the last worksheet in my workbook. The loop only seems to be partly working, and I just can't work out why.
Sub maxLifData()
' for each worksheet in the workbook, do dmax formulae and add results to new sheet. bhole id on left, depth across top.
Dim ws As Worksheet
Dim wsName() As String
Dim i As Integer
Dim mCount As Integer
Dim nr1 As Range
Dim nr2 As Range
Dim head1 As String
Dim head2 As String
Dim wsRangeName() As String
Dim maxF As String
Dim fRange As Range
Dim rng As Range
Dim mRng As Range
head1 = "STCN_DPTH"
Set fRange = Range("G3")
Set mRng = Range("A2")
Redim wsName(Worksheets.Count)
Redim wsRangeName(Worksheets.Count).............
I'm creating a button so as to input a chart where the user inputs the name of the range that they want the chart to hold. The named ranges are dynamic thus I want the graph to also be dynamic but when added the source is simply the range of the name rather than the name itself.
Is there anyway I can enter in a VB variable into quotations marks so that it simply writes that.
I've a workbook in excel 2007 with 6 worksheets, 4 of witch have a named ranges, i would like to have a macro that consolidates this named ranges into one worksheet.
Can named ranges defined using the Application.names.add method be accessed using the worksheet(x).names(name) property?
I would like to access only the named ranges on one worksheet, but, it seems to me that the names collection of my worksheet contains no names.
If this is a result of my declaring the named ranges using the application.names.add method, is there a worksheet property that I could use to access only the named ranges on that worksheet?
If I copy worksheet in Excel, the named ranges are copied too. If I copy in VBA, they are not. Is the only solution to loop thru the named ranges or is there something smarter like some "fullcopy"?
I was after a bit of code to delete the range names on a particular worksheet I thought it couldn't be that hard but have only been able to find this in the archives, unfortunately I get an error when trying to execute it:
Sub Delete_My_Named_Ranges() Dim n As Name Dim Sht As String ' Put in name of sheet where the range is located Sht = "Org Lookups" For Each n In ThisWorkbook.Names If n.RefersToRange.Worksheet.Name = Sht Then n.Delete End If Next n The error I'm getting is Run-Time error 1004, Application defined or object defined error.
I looking for a macro to look in a list in worksheet "Map_Ref", and take the Range Name of column "A" and copy that range in the corresponding Tab and range as specified in Columns "C" and "D" (i,e. take range name "BB Staff Counts_Tenured" from cell "A2" and copy that range in worksheet "Sheet2" (as specified in cell C2), range "A2" (as specified in cell D2). And so on.
List of worksheet "Map_Ref":
Column AColumn BColumn CColumn DTable/Range Title/Name: Range in Tab "CMD_1"Copy to Tab:To Range:BB_Staff_Counts_TenuredA126..Q156Sheet2A2Branch_Counts_BBmarketsA35.. C47Sheet2A59Branch_Counts_Chase_SBRM_RegA30..E33
I am trying to creat a macro that loops all the named ranges in a worksheet named "Labels", and copy the data to a new worksheet for each named range it finds in the same workbook and name each worksheet with the named range name.
I just named a range on a sheet and would like to paste that range on a different worksheet within the same workbook. I can't figure out how to refer to the range. I've tried several different variations so far. Example below:
ActiveWorkbook.ActiveSheet.Names.Add Name:="RawSectorData", RefersToR1C1:="=R6C1:R29C11" 'Add new sheet and paste data ActiveSheet.Name = "Raw_data_Sector_Summary" ActiveWorkbook.Sheets.Add.Name = "RawData" Range("A1").Formula = "=RawData!(RawSectorData)"
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code: Sub Auto_Open() ' Dim sht As Worksheet If Range("A1") = 1 Then
I'm working on or any part of it on here, because the work belongs to my employers and would constitute the loss of trade secrets. It would also take me way longer than I have the time to invest to put together a functional duplicate of the relevant part of the sheet just to be able to post it.
With that in mind, what I'm trying to do is refer to part of a range that spans five columns (though it could conceivably span more in the future, so I'd rather not count on that detail) and a constantly changing numbers of rows. The part I want to refer to includes all columns, and all rows except the first and the last in the range.
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
clearcontents is clearing some cells outside of the specified range. Some of the cells in row 10, which is above the beginning row of specified range, are also getting cleared. I've tried several variations to no avail.
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
I have built a chart using dynamic nameranges. The problem that I am facing is I tested it on two systems . One system the charts works fine but the other system the charts does not work . Both are excel 2007. Now the error that I get is if I see the chart data source from one system it is showing "!". The other file shows the chart data source as "0!". What should I be checking so that it works in the other system as well?
I would like the formula to read the worksheet name rather than entering the word Tankersley directly, so that if I copy it to another worksheet named Tyson, the formula would read:
With Sheets("Sheet2").Select Range("c" & rBegRow).Select Application.CutCopyMode = False ActiveCell.FormulaR1C1 = _ "=IF(Sheet1!R[-8]C[4]<>0,Sheet1!R[-8]C[4]*-1,Sheet1!R[-8]C[5]*-1)" Range("C" & rBegRow).Select Selection.Copy Range(Selection, Selection.End(xlDown)).Select ActiveSheet.Paste End With
The reason is that once the formula is inserted in to the cell in worksheet 2 then I drag it down kind of like a copy paste so it changes automatically the if statement cell reference to worksheet 1 automatically. the trouble I am having is that I do not want to use the R[#]C[#] since when the contents of the information changes the formula does not work properly. If i substitute them for G9 instead of the R[-8]C[4] and H9 R[-8]C[5] but it inputs it in the actual excel worksheet as =IF(Sheet1!'G9<>0,Sheet1!'G9*-1,Sheet1!'H9*-1) therefore creating a value error.
I'm reading data, from specific cells off a closed workbook. When the sheet that needs said cell data is activated, it automatically opens the workbook and references the sheet nessecary. The issue I've come across, is I now need to access another workbook (Easy to open) with 12 sheets 1 for each month, and only read from the worksheet of the actual Month. Kind of lost on how to possibly make this work. I basically need something like: =location/[workbook.xls]worksheet!cell - where worksheet = B12 and B12 =month(today()) and is formatted to MMMM
How does one pick up the data contained in a worksheet cell (say B5) and use it in the vba code of a custom function without passing the cell as an arguement
OK, I have a huge SS with lots of named ranges. Many of which are dynamically assigned lists.
All of the existing ones work fine, but when try to add a new named range, it returns the cells from a previously named range. (Always the same old one.)
example:
A range (one of many) is named "Shift_List" and is defined using =OFFSET(info!$C$3, 0, 0, COUNTA(info!$C$3:$C$2000),1)
New range is created named "PN_List" and is defines using =OFFSET(info!AA$3, 0, 0, COUNTA(info!AA$3:AA$2000),1)
When I create a Data Validation List or otherwise use "Shift_List" as the source it works fine.
However if I do the same thing and refer to "PN_List", it returns the items from "Shift_List"
Any new named range returns the Shift_List cells, although older ones still work correctly.
I'm just trying to copy certain cells from one worksheet & add them to the next available row on the next sheet, my data is going right down to the end of the sheet though (row 1048554) & instead of placing them on the same row its placing them in the row underneath the previous data in the next column. My code is below & I've included a table at the very bottom of how the data is coming out.
I am trying to make a UDF that searches for a header, grabs everything under the header, and pulls it somewhere else. My UDF has three parameters:
1) Output_Range: the named range where the parameters will be pulled to 2) Header: the header to search for in order to copy the data underneath it 3) WorkbookName: the name of the workbook to search in
It looks like this:
VB: Function LoadParameters(Output_Range As Range, Header, WorkbookName As String) MyTimer = Timer 'Defining the variables. Dim HeaderCell, HeaderCellEnd, HeaderRange, Output_Range
I have some named ranges that refer to 5 pieces of data organized into a row. For example, the name MyNamedRange might refer to $C$5:$C$10.
I am trying to loop through each column and get the values in MyNamedRange, then change corresponding values in a different named range. However, when I try to use Offset to access the subsequent columns of MyNamedRange, it doesn't work. It only gets the value of the first column right, the rest return <EMPTY>.
How do I go about using named ranges instead of cell names(ie A4:A9)
Private Sub UserForm_Activate() Dim lngRow As Long Dim intIndex As Integer UserForm1.ComboBox1.Clear 'Clear combobox lngRow = 2 Do While Sheet1.Range("a" & lngRow).Value <> "" For intIndex = 0 To UserForm1.ComboBox1.ListCount - 1 If UserForm1.ComboBox1.List(intIndex) = Sheet1.Range("a" & lngRow).Value Then Goto NextRow End If Next intIndex UserForm1.ComboBox1.AddItem Sheet1.Range("a" & lngRow).Value NextRow: lngRow = lngRow + 1 Loop End Sub
I wanted to change "a" to the defined range "search"?
the code to add two independent named ranges cell by cell in vba. Both of the named ranges have the same structure and the sum would be posted to a third area of the same structure cell wise.
for my kind of business we start off with 1 worksheet that has the original plan. We name this sheet "R(0)" Every time the plan is revised (modified) it is only done by first creating a new worksheet then saving the revisions there. When we create a new worksheet it is automatically named "R(1)" , as in Revision 1.
My request is the following; i have placed cell number "D86" to reflect the unique date that the sheet is created, so that every time a revision is done when creating a new sheet, the idea is to have this cell automatically update, inorder to reflect the date & time the revision was created. So at the end of the week when you have 5 revisions (5 worksheets), each worksheet will reflect the unique date & time of the revision.