I have a userform which is designed to get and enter data into one worksheet.
When I call the userform up from a different worksheet it doesnt refer back to the data source worksheet?? How can I do this?
I have used
sheets("dataworksheet").activate
in the user form initialise event but this still doesnt work.
I need a macro to clear data on 2 worksheets that i can add to a button. lets say sheet1 B55:Y55 and sheet2 b102:y102
View 3 Replies View RelatedI'm just trying to copy certain cells from one worksheet & add them to the next available row on the next sheet, my data is going right down to the end of the sheet though (row 1048554) & instead of placing them on the same row its placing them in the row underneath the previous data in the next column. My code is below & I've included a table at the very bottom of how the data is coming out.
Sub Copydata()
Range("A" & Rows.Count).End(xlUp).Offset(1).Select
Sheets("PO").Select
[Code]....
I have a FOR loop which is supposed to loop through all the worksheets in my workbook, create a named range, then add some data to the right of the range. However, when I run my code, all the named ranges refer to the last worksheet in my workbook. The loop only seems to be partly working, and I just can't work out why.
Sub maxLifData()
' for each worksheet in the workbook, do dmax formulae and add results to new sheet. bhole id on left, depth across top.
Dim ws As Worksheet
Dim wsName() As String
Dim i As Integer
Dim mCount As Integer
Dim nr1 As Range
Dim nr2 As Range
Dim head1 As String
Dim head2 As String
Dim wsRangeName() As String
Dim maxF As String
Dim fRange As Range
Dim rng As Range
Dim mRng As Range
head1 = "STCN_DPTH"
Set fRange = Range("G3")
Set mRng = Range("A2")
Redim wsName(Worksheets.Count)
Redim wsRangeName(Worksheets.Count).............
Im trying to take information and have it copy to a different worsheet when a certain selection or type is put into a column.
Example:
On worksheet "Alpha"...
Column "A" will have "Maintenance, Supplies, or Payroll" in it.
Column "B" will have a currency.
On Worksheet "Bravo"...
I would like to have everything from Column "B" on "Alpha" to be placed here that has "Maintenance" in Column "A"
On Worksheet "Charlie"...
I would like to have everything from Column "B" on "Alpha" to be placed here that has "Supplies" in Column "A"
Etc...
using VBA, I created a simple problem that I can't figure out how to solve in worksheet 2, I have 3 worksheets.
1. Players - Complete info of players
2. Members - When I select the team name, I'd like to display the info First Name, Last Name and Team only for the team name I've chosen. This should automatically change whenever I select a team name.
3. Team Codes - Tables I used for my vlookup and drop down list.
I have attached my file for your reference.
i need to get certain info from one worksheet to another is there any way to do this automatically
View 9 Replies View RelatedI am working on a product quote pricing worksheet. I have several products and on my one worksheet I have about 5 different columns with drop down boxes with several different choices. I want to know if there is a way to select something from the drop down list and once something is chosen information on that particular product can populate a cell on another worksheet.
View 3 Replies View RelatedI have a macro that saves the workbook after it has finsihed the rest of its formatting. I am finding it is saving in the wrong folder. I looked at my code and it is clearly states 'my documents' where I want it to save. Yet it keeps saving on a random folder on a shared drive.
View 8 Replies View RelatedThis macro has a problem in that it totals up the colunmns in two places by error
The total should be at the end of the coumns only.
It gives me a total part way through the list which muddles things up a bit.
Sub prepareSAPexport()
'
' prepareSAPexport Macro
' prepare the sap export ready to be compared to CDS
'
' Keyboard Shortcut: Ctrl+s
'
Range("A1").Select
[code]....
I don't really know how to search this question but what I am trying to do is pull information from one worksheet to another only containing numbers greater than 0. For example, i have an order sheet containing everything that is in stock, then I go down the list and put in the number of items being sold (1,2,3, etc). Some items will have a value of zero.
Then the items that have numbers (the ones that are being sold) I want to be able to pull these numbers along with the item description onto another worksheet which will be the invoice. Then excel will add up the prices of only the items being sold and give me a total value on the invoice. Is this doable?
I have one worksheet with 238 rows and another with 163 rows. I want to pull information into the sheet with 238 rows whenever there is a match to a record in the 163 rows. I tried VLookup, but as soon as it gets to a record in the 238 that doesn't exist in the 163 it gives errrors and stops. I've looked at =offset and =offset(match) but I'm not finding anything that deals with the situation of not always being a one-to-one (or even one-to many) relationship. Ultimately I want to pull the Category & Project fields into the records matching on IDNumb in Sheet 1 but Sheet 1 has more records than Sheet2. example......
View 5 Replies View RelatedThe worksheet perfectly performs as expected, big thanks to JBeaucaire again. Now, as am looking around of the file and doing some exploration on the array, as I was trying to make this applicable to real life application, I noticed the following mysteries...
1. When I tried to delete some rows, The Members Sheet output went wrong and displaying #N/A. I noticed it's because the formula range have change. But it would be hard for a new user to re-arrange it over and over again everytime when a row is deleted.
2. I've been trying to solve this problem to no avail. I found this link that gives me an idea how my worksheet should work, this was already solved but I can't apply it on my worksheet...
http://www.excelforum.com/excel-prog...nd-resort.html
3. I would like to add another column on A to put the 0 and 1 on, but I don't need to delete this column after the resort so that next time if I need to delete another row existing row i'll just replace the existing 0 with 1 on column A.
I've got an excel master roster sheet filled with youth hockey player info and stats. Fields are in columns, and a couple hundred rows of players. What I'm planning to do use this info for a spring teams draft. I've got a blank field/column ready to write in the team names to which each player will be drafted.
What I'd like to do is have several other 'team pages' in the excel workbook that first look through the master roster sheet, checking for a matching team name. Next, those team pages would populate themselves with all the player information on the master sheet, provided the team name matches. Basically I want to have the rosters created automatically rather than doing any autofiltering after.
I did try a VLookup function, but it would only pull the first matching record, and nothing after.
[Code] ....
But it doesn't show the correct sheet after running it.
I need it to show the sheet called "Invoice with code".
The below code is supposed to delete data on the last sheet of the workbook HeadsetOutTimeMay.xls however for some reason it is deleting the data on HeadsetOutTime.xls What am I doing wrong?
View 8 Replies View RelatedI have a macro on a particular workbook that runs when the workbook closes.
This runs fine when I close the workbook itself. If I happen to have other workbooks open and then I close EXCEL rather than an individual workbook, my macro that runs on close always runs when it is not the active workbook.
To put it another way, say that my 'run on close' macro is workbook 1. I also have workbooks 2 and 3 open as well. If workbook 3 is the active workbook and I choose to close Excel (and thus close all three workbooks), my 'run on close' macro runs straight away and, worse still, will run it on workbook 3 (my active workbook).
How can I stop the macro running until it is the active workbook in the closing chain, so that it only runs on the correct workbook? (workbook 1 in my example)
I have this macro
For I = 6 To 18
Sheets(I).Visible = xlSheetVisible
PrintSubs Sheets(I)
Sheets(I).Visible = xlSheetVeryHidden
Next
End Sub
When it starts printing it starts off with my "JOBCOM" sheet which is sheet20. why it would start printing with that one. That sheet shouldn't even print at all. It's only supposed to print sheets6 to sheet18.
I need to create a new excel template for work. I was planning to copy a few worksheets from an old workbook over into the new workbook, mostly just for formatting for some graphs/tables that I would then link to the new workbook. A coworker said I cannot do this as copying from an old workbook will bring in "hidden" data that could some way impact the integrity of the new workbook and that the copied/old worksheet would FOREVER be linked to the new workbook no matter what I do. Is this true? If so, are there things I can do to remove any reliance to the old workbook.
View 1 Replies View RelatedThe below code is giving wrong error.
[Code] ........
sheet1 has the following data
sheet1 has the following data
empid name loc
1 aaaa ddd
2 bbbb ggg
4 cccc dddd
the 3rd row is empty in sheet1 but still it is showing number of rows as 3.I need macro it will not count if entire row is empty in that sheet.
I'm exporting a csv file from a membership database with the attendance of members. With a macro i open the file and copy the contend to excel. With the macro the column for the date has *randomly* wrong formats. Example the date in column B:
Aasia Tallah19-03-2009 19:33
Aasia Tallah17/03/09 7:49 pm
Aasia Tallah15/03/09 7:53 pm
Aasia Tallah14/03/09 6:34 pm
Aasia Tallah03-12-2009 20:05
Aasia Tallah03-11-2009 19:56
Aasia Tallah03-10-2009 19:54
I try to change the format of the column, but that does not work. Rows 2,3 and 4 seem to be text but they are not. If i access the edit bar for example the 17th of march and store without changing anything, it changes to the format of the first row. That is how i want it. If i copy the column by hand, every thing is fine.
All of the following i tryed:
- format date column of the csv before copying... failed
- copy special with only pasting values... failed
- preformat the column i paste the date to... failed
- delete the sheet i paste to and create a new one... failed
- copy the macro to a new workbook... failed
When running a macro is there a way you can execute code on another sheet within a workbook without being in the original sheet?
I seem to have a problem if I accidentally run a macro not on the original sheet whereby the code is executed and fills over data not in the desired sheet and the previous cells information is lost and the only way to fix the problem is to close the workbook and re-open a saved copy as you can't undo?
I have a group of Excel (2003) template files, each with a different name. When these files are opened they ask for certain information and save themselves as a unique name. Within these files are VBA routines and functions and, because these files basically do the same things, they have the same name. These routines exist in their own unique modules each with a different name. Unfortunately, in these files there are differences in the number of columns of information these routines act on so once they have been saved I need them to only act on their own columns only.
My problem is, when I have more than 1 of these files open in the same instance of Excel, I try to run a file using a control letter combination Ctrl-e and it sometimes runs the version of the macro in the wrong file. This leads to all kinds of strange thing happening. What I can do to force the correct macro to work in all instances?
taking a spreadsheet that has vertical repeating info in Column A and results in Column B and converting that to another sheet in a horizontal list. The main problem is that the repeating info in Column A may or may not always be the same for every customer; therefore, when it is placed in a horizontal format some cells may or may not have results. I tried a arbitrary lookup. Here is the formula I used:
{=INDEX(INFO!$A$1:$B$300, SMALL(IF($A$1=INFO!$A$1:$A$300, ROW(INFO!$A$1:$A$300)-MIN(ROW(INFO!$A$1:$A$300))+1, ""), ROW(B1)),COLUMN(B1))}
That got me started. I am willing to use a macro. Here is some sample data:
Table 1 has a sample of the info:
IDENTIFIER
CUSTOMER INFO
2000
111111
[Code].....
I would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies View RelatedI have attached a spreadsheet and I am trying to capture the info in lines 2,7,12,17 and return the info into column d,e,f,g
The info in these columns at present has been manually entered but I am sure it could be automated.
OOL Roster Final 18-31Aug14.xlsx
I need to make a macro to get sales information from sheet one to sheet 2 in a different order with a few other things that need to be added in everything I need is in sheet 2.
Sheet 1 is what I work with and I need it to look like sheet 2 using a macro I wrote what I need in sheet 2A13-...
I'd like to build two macros that are slightly different but are both along the same lines.. The first one will take only certain columns of information from the "Master" sheet and dump them into the "Public" sheet. (I want only certain information to be seen by others). I.E. say I only want columns A, H, K, L from the master sheet to go in A, B, C, D in the Public sheet. I hope thats enough detail.
The other macro I want to build will take the A, B, C, D information from the Public worksheet and dump it all into another workbook called "Client Lists". The link to these two documents would be over a network so there shouldn't be any issue there... This way, all the people I work with can have this document and have up-to-date information on clients etc.ed...
There is a webcreated excel document that generates dates as the date of such as:
4/1/09 12:39:00 PM
I want to write a macro that will remove the date part and just leave the time. How would I write that? Times are in columns C and D and I want it to scan all the way down to row 600 and replace.
my macro is set up to do the following in my book once the user inputs a row of information. the user will go to the opproperate sheet based customer and input all info.
the macro is run (ctrl+z)
the macro takes the last row in the active sheet, and pastes it into the last row of the "ALL" sheet. then it goes and sorts the sheet in order.
i want to adjust it so that the user will input the row of information into the last row of in the "ALL" sheet. then based on the given informaiton, paste the same row in both the corresponding customer and location sheets.
im assuming im going to need to use some variables?
attached is the test spreadsheet.