The chart is a "chChartTypeLine". the problem is that i cannot change the format of the X-Axis to a Date (mm/dd/yy) format no matter what I try? I keeps wanting to keep it as "General", here is the code;
Private Sub CommandButton1_Click()
Dim ser As ChSeries
Dim cht As ChChart
Dim MinValue As Double
Dim MaxValue As Double
I am trying to create a text box using the format control, however, everytime I click on the box it go to visual basic editor. I believe I'm missing something. I am not familiar with visual basic.
I made a pivot chart. On the X axis are days of the year. I would like the axis to give the months rather than the days, because it is easier to read. But when I select the chart's axis, I don't have acces to any "number" sheet in the "Axis format" section. I could just change the scale.
ActiveChart.Axes(xlCategory).Select With Selection.TickLabels .Alignment = xlCenter . Offset = 100 .ReadingOrder = xlContext .Orientation = 45 .NumberFormat = "[$-41D]mmmm;@" 'I added this line End With ActiveChart.HasPivotFields = False
What I have is a double quoted, comma delimited text file that is created from an external application, every now and again we need to open the file to make corrections and this is easier if we open it via Excel using the delimiter options, the problem is when saving the file as a csv it removes the double quotes, however I have found some vba coding that adds the double quotes back, which works great, but it changes the format of the date fields from what the original file had from 09-Aug-2009 to 09/08/2009.
I suspect this may be because the file is opened before the double quotes are added and excel changes the format.
Is there any code I can add that will stop the date format from changing ...
I am stuck trying to sort data that looks like the following, into a format that I can use as source data for pivot tables/charts.
Excel2007ABCDEFGHIJK2MalayMalayMalayMalayMalayMalay ChineseChinese3MaleFemaleFemaleMaleFemaleFemaleMaleMale 436-4536-4536-4525-3525-3525-3536-4536-455 DateArticleContentLapseCurrentCurrentCurrentLapseLapseCurrentCurrent612-SepRelieving 40 years - Oct 15, 1972 Thick Haze continues to blanket MalaysiaHistory42712-SepRelieving 40 years - May 5, 1972 All Sharifah wants is a pair of legsHistory1222812-SepA man and his agonyHistory3223912-SepA lesson on Sept 16History22Sheet2
I will need to group Data multiple ways. However, I cant work out a good way to sort it. Can I have a suggestion on layout that I will be able to arrange data appropriately.
After programmatically creating a new activex checkbox, I want to create a sub for it's click event. I have given the object a name, and fortunately the code for it's click event is a one-line call of another sub, but how?
The sub would look like the following except be named after the new control (obviously), and yes, it is just the number in the name that changes:
(I am using different data IRL which is company sensitive so I have designed a simple example spreadsheet.)
Ok, So I have a list of words A2:A4 and I have created a Control Box which allows me to select which word I want from the list.
On a separate tab I have lists of data which relates to individual words from the A2:A4 list.
What I what to achieve is when the word is selected from the drop down menu it will create a Pie chart showing me the break down of percentages and attributing 'companies'.
I've used trend lines to find the mean and average but for some reason I have not been able to set an upper and lower limit. without introducing a new column.
I am trying to use the Chartspace object on a VBA form in Excel 2002, but am unable to find out how to specify the speadsheet data to be used for each series. I have found out how to add series, and to add titles & legend etc.
I have a feeling this is a stupid question, but I can't figure it out right now... I have a worksheet with a bunch of charts as worksheets. I want to put command buttons on these charts. Whenever I select a tab which as a chart on it, my controls are grayed out, and I cannot insert a button. When I select a tab of a regular worksheet, I can insert buttons to my heart's content. Why can I not insert controls to the tabs which are charts? The ridiculous thing is, I have done it before. When I open that file, my buttons are on the chart. However, even in that sheet, I cannot insert more. Do I have a setting that I have changed, or somewhere I can look to enable the ability to put controls on a chart?
Is there a way to make the colours in a chart (pie, column etc) correspond to a value? I'm using Excel 2002, soon to start using 2003.
For example, imagine a normal pie chart showing the population of each country in North, Central and South America. But for each country, colour gradations would be used to show levels of wealth (e.g., GDP per capita) as follows:
saturated red = bottom 20% (poorest) pink = 21-40th percentile, white = 41-60%, gray = 61-80%, black = 81-100% (richest)
Is this possible? And not to get too greedy, but can you use even finer gradations -- say, with ten categories, as opposed to the five in the example above?
My X axis range is small 1 to 4. but I want to show minor grid lines at 0.5, 1.5, 2.5, and 3.5 only. I do not want lines at 1, 2, 3 or 4. I am not sure how to achieve this. as switching on minor grid lines, included those at the integers as well as at the half way points.
I have wriiten some simple code to create a chart which works fine. I have a problem applying formatting to my chart. I am using the With construct to apply the formatting, but the problem is that the chart name keeps on incrementing from "Chart 1" to Chart 23" etc. each time I run the chart and I get an error message before the With code?
I need to control the amount of decimals allowed by the entry of another column same row so I do not have to format the cells everytime to get the correct decimal places. I need all my data in one table so I can do pivot tables.
I'm starting to figure out this Combo Box filter stuff but the problem I'm having is when I right click on the Combo Box to enter the Control tab in the Format Control menu, the Control tab is not there. how to get the Control tab to show up?
I'm not too familiar with VB, and I'm trying to narrow down why my macro (and how) is creating a second, duplicate chart. I only need the chart to be created (and the corresponding data fields on the 3rd worksheet) once.
I am trying to create a Pivot Chart. My data consist of staff whom had errors in their work done. The data has a time when the work was completed by the staff. I would like to generate a Pivot Chart that has a line chart that shows when the work was completed based on the time and can be sorted easily by team, date, staff ,shift and errors.I know the easiest way is by Pivot Chart. I am not sure how to accomplish this as I had tried with the Pivot Chart and it did not work.
I am creating a graph for data that I collected. It was pretty easy to create. The problem is that I want to be able to have certain segments a red color. This is the data that I have
I would like to create a line segment which is easy to do. But I need certain segments to be red. Such as this the line segment between 10006-10450 should be red. And the segment from 11424-11691 should be red too. I have attached my current chart that does not have the red.
For work, I'm doing a project for Quality Control. I'm looking to create a Bar Chart (horizontal bars) with 2 "vertical" lines to indicate the range of acceptable values
Attached to this Post is a *.pdf that (hopefully) further explains what I'm looking for.
I have a bunch of data about companies in an Excel workbook. I need to be able to create a "summary document" about a selected company in word. One of the items that needs to be in this summary is a pie chart.
This code works fine for generating the basic text of the document:
Code: Sub export_to_word() Dim wrdApp As Word.Application Dim wrdDoc As Word.Document Dim companyName As String Dim address As String Dim revenue As String
[code]....
Creating the chart has been more problematic. I adapted the following code from an example found on MSDN:
Code: Dim valueChart As Chart Dim chartWorkSheet As Excel.Worksheet Set valueChart = wrdDoc.Shapes.AddChart.Chart valueChart.ChartType = xl3DPie Set chartWorkSheet = valueChart.ChartData.Workbook.Worksheets(1) chartWorkSheet.ListObjects("Table1").Resize chartWorkSheet.Range("A1:B12")
[code]....
What I've found though is that this code is based on a macro inside the word document, not excel. So it runs fine from within word, but within excel it throws an error at this line
Code: Set chartWorkSheet = valueChart.ChartData.Workbook.Worksheets(1)
because ChartData is not in the object model in Excel. how to proceed at this point.
