i am looking at creating a combine chart for 3 variables.how to achieve that?
TeamSubTeamsScore
A X 20
Y 25
B X 10
Y 20
C X 15
Y 10
I am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
I would like combine (overlay) a bubble chart with a connected point scatter chart. I understand that, without VBA, this is not possible. However, I understand that, by using VBA, the markers of a scatter chart can be configured as circles with their size proportional to values in a specified column. This pseudo-bubble chart can then easily be combined with a connected point scatter chart.
My question is: does anyone have any VBA code to share that shows how to configure a scatter chart as the type of pseudo-bubble chart described above.
I would like to combine variables and paste them into one cell. For example, I have a city stored in the variable "city", a state stored in the variable "state", and the zip stored in the variable "zip".
So I need something like...
Range("A1")=city, state zip
I've been attempting to find a macro that would combine a number of similar workbooks into one large workbook. The files I'm dealing with are all .csv files with identical columns and headers.
I found one macro here: see below (this is the start of the macro) yet either I'm not using it correctly or there are errors in it as when I run it I get an error that says Run-time error '9' Subscript out of range and gives me the option to debug it. When I choose to debug it opens up the macro and has the following section highlighted?
Set wsMaster = ThisWorkbook.Sheets("Master") 'sheet report is built into
The macro in I found on this site begins with the following:
Option Explicit
Sub Consolidate()
'Author: Jerry Beaucaire'
'Date: 9/15/2009 (2007 compatible) (updated 4/29/2011)
'Summary: Merge files in a specific folder into one master sheet (stacked)
' Moves imported files into another folder
I have a hard time creating a macro from scratch I have 7 different excel files which im trying to create a macro that will combine all of this files (reports) into one, and then put the CT information (an excel file i have) on a separate tab within the 1 common report.
View 9 Replies View Relatedif Row i Column j is activated then a corresponding variable Aij, Bij, Cij or Dij would be created (if not already existing), or cumulated by 1. The problem as I see it - completely generalised - is to create a variable where the variable name itself is formulaic, as well as its value. I know SAS would have no problem with this due to the order in which it parses data steps, but I'm pretty amateur with other programming languages so I don't know if this is blindingly obvious or downright impossible!
View 3 Replies View RelatedI am trying to create a column chart in which i want to incorporate 2 variables. However I don't want to use the line for the second variable. What I would like to do is to add the information of the number of deals a company has done on top of the column. So you see a column which gives you the average size of a deal, and the you should see a number at that column to see the number of deals done with that company.
To make this more clear I have attached an example. There are 2 tables of which the information I would like to see in one chart.
I am doing financial ratio analysis of a company for five years and I need to show the ratios in a trendline. I have generated seperate line charts for each ratio, but I want to combine the charts and have multiple trendlines for multiple data series in a chart.
View 3 Replies View RelatedI have a list of about 700 guys with their names, ages and a coolness factor between 1 and 10. I have different categories that I want them to fit into based on their age and "coolness". The charts at the top of the sheet I've uploaded. Ages are on the top and their coolness rating is on the side. So for instance if somebody is 27 and has a coolness of 6 they would be lumped in the World category. How do I create an IF command that would automatically list what category they're in based on age and coolness?
View 6 Replies View RelatedI have wriiten some simple code to create a chart which works fine. I have a problem applying formatting to my chart. I am using the With construct to apply the formatting, but the problem is that the chart name keeps on incrementing from "Chart 1" to Chart 23" etc. each time I run the chart and I get an error message before the With code?
View 2 Replies View RelatedI have creating a chart. All the information in the source data appears to me to be ok but the chart isn't been displayed.
View 9 Replies View RelatedI'm not too familiar with VB, and I'm trying to narrow down why my macro (and how) is creating a second, duplicate chart. I only need the chart to be created (and the corresponding data fields on the 3rd worksheet) once.
View 2 Replies View RelatedI am trying to create a Pivot Chart. My data consist of staff whom had errors in their work done. The data has a time when the work was completed by the staff. I would like to generate a Pivot Chart that has a line chart that shows when the work was completed based on the time and can be sorted easily by team, date, staff ,shift and errors.I know the easiest way is by Pivot Chart. I am not sure how to accomplish this as I had tried with the Pivot Chart and it did not work.
View 4 Replies View RelatedI'm trying to show learner progress during our half term collections but the values we track are similar to that below
2B+
2B
2B-
2C+
2C
2C-
1A+
1A
When I attempt to make a chart in the normal format it doesn't recognise the value.
I am creating a graph for data that I collected. It was pretty easy to create. The problem is that I want to be able to have certain segments a red color. This is the data that I have
3380
0831
01374
01570
01928
02403
03003
03703
04128
04333
04777
05283
15732
16184
16822
06974
07310
07700
07995
08040
08402
08531
09208
39473
110006
010450
011072
111424
111691
112177
012925
I would like to create a line segment which is easy to do. But I need certain segments to be red. Such as this the line segment between 10006-10450 should be red. And the segment from 11424-11691 should be red too. I have attached my current chart that does not have the red.
For work, I'm doing a project for Quality Control. I'm looking to create a Bar Chart (horizontal bars) with 2 "vertical" lines to indicate the range of acceptable values
Attached to this Post is a *.pdf that (hopefully) further explains what I'm looking for.
I have a bunch of data about companies in an Excel workbook. I need to be able to create a "summary document" about a selected company in word. One of the items that needs to be in this summary is a pie chart.
This code works fine for generating the basic text of the document:
Code:
Sub export_to_word()
Dim wrdApp As Word.Application
Dim wrdDoc As Word.Document
Dim companyName As String
Dim address As String
Dim revenue As String
[code]....
Creating the chart has been more problematic. I adapted the following code from an example found on MSDN:
Code:
Dim valueChart As Chart
Dim chartWorkSheet As Excel.Worksheet
Set valueChart = wrdDoc.Shapes.AddChart.Chart
valueChart.ChartType = xl3DPie
Set chartWorkSheet = valueChart.ChartData.Workbook.Worksheets(1)
chartWorkSheet.ListObjects("Table1").Resize chartWorkSheet.Range("A1:B12")
[code]....
What I've found though is that this code is based on a macro inside the word document, not excel. So it runs fine from within word, but within excel it throws an error at this line
Code:
Set chartWorkSheet = valueChart.ChartData.Workbook.Worksheets(1)
because ChartData is not in the object model in Excel. how to proceed at this point.
My chart is coming in blank when I set up a line chart. This is my data that I selected and then pressed chart. 1997
63.9%
1998
63.2%
[Code].....
I have a column with values​​:
15 1 16 11 2 15 31 30 26 49
Need to build a diagram, like parabola.
Once again, the task:
For example, we have a number 2, 5 and 10. It will hit 1-2 3 times, 2 times 3-5, 6-10 1 times.
And that we get a parabola.
Example:
How to do it?
I am working on an excel macro for work to work with data processing. Basically, it takes a bunch of CSV files and creates a workbook with each file as a new Worksheet; then it has the user enter some calibration data; and finally fills a column with the calculations to convert the data into the correct units. I would like to get it to put an XY Scatter chart of the data on each pages, but I'm having some problems with it. I recorded a macro to get an idea of what the code should look like, but when I put it into the macro I'm writing it places all of the charts on the last worksheet.
Here is the code that I came up with for the chart generation:
Code:
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlXYScatterLinesNoMarkers
ActiveChart.SetSourceData Source:=Worksheets(i).Range("D:D,F:F")
Columns D and F are the two that contain the data that I want to plot. In my macro this is running inside a look so Worksheets(i) is selecting the correct ranges on the correct worksheet. I think my problem is that after the merged workbook is created it is defaulting to the last worksheet being the ActiveSheet, and I don't know how to change that.
I am not sure if this is possible. I wish to have a chart in a worksheet linked to a stock chart on a webpage.
For example, consider this chart on Yahoo Finance. At present every week, I have to go to the webpage and copy the chart and then paste it into a worksheet.
Is there a way I can automate this task by linking the chart to an Excel object or by any other way?
i have this data.
WeekFRM CURRCY Account val val2 val3 val4
42100¢BBHBANK403522
43100¢BK200 001310
44100ABBHBANK3013
45100ABK200 9043
46100CBBHBANK10106
47100EBBHBANK903420
48100EBK200 503527
How do i get this into a chart, with week along the bottom, Amount on the left. This is starting to be a pain now as i need to seperate by currency, but a pivot chart looks really realy messy with all the drop down boxes and stuff. I dont mind using drop don boxes, in fact, its going to be essential. but the pivot one look horrible.
I am using the VBA Chart Control and I have the following instruction;
Me.ChartSpace1.Axes(ChartAxisPositionEnum.chAxisPositionCategory).Numb erFormat = "mm/dd/yy"
The chart is a "chChartTypeLine". the problem is that i cannot change the format of the X-Axis to a Date (mm/dd/yy) format no matter what I try? I keeps wanting to keep it as "General", here is the code;
Private Sub CommandButton1_Click()
Dim ser As ChSeries
Dim cht As ChChart
Dim MinValue As Double
Dim MaxValue As Double
MinValue = Sheet1.Range("D2").Value + 10
MaxValue = Sheet1.Range("A2").Value
I have a line Chart and want to create a static horizontal/indicator line.
I cannot create a new series to plot this horizontal line as I'm using an external data source (OLAP cube) as source data for the chart.
I am creating a chart with more than 2000 dates (each day). How can I format the axis so it only displays the 1st day of each quarter (01/01/2010, 01/04/2010, 01/07/2010...).
At the moment I cannot format the axis and minor/major units remain numbers.
I am using Excel 2010 and European date format.
I am trying to create a dynamic Excel line chart.
All is well, except for my x-axis (which is a text axis). It currently looks like this: Dynamic axis.jpg
I am using the Offset formula. The formula for my x-axis is =OFFSET(Worksheet1!$D$4,0,-3,COUNT(Worksheet1!$D$4:$D$36)). This is to show the axis if cells in Column D are filled up appropriately.
However, in the cells containing the axis name itself, this formula is used =IF(D9=0,NA(),'Worksheet2'!A6). I've tried removing the formula from these cell, but that didn't solve the problem.
I am trying to automatically generate an organisation chart in excel from a dynamic list of employees. in column 'A' will be the "manager's name", column 'B" will be the "employee name", column 'C' will be the "employee number" & column 'D' will be the "employee days" number (an potentially a few more employee attributes)
I would like a printable org chart that is created on another tab which is generated from this list, ideally with the "employee name" and their other attributes shown in the chart.
how this can be done in excel, maybe VBA?
Is it possible to put in Trend Lines when creating a stacked column chart?
I've tried in Excel 2003 and 2010 but it doesn't appear that it is possible.
I am doing an ANOVA analysis of survey results for a set of products, and would like to present a chart to graphically represent the results.
View 1 Replies View Related