Format Label Control

Jul 16, 2007

I would like to format a Label, such that it displays numbers with only 2 or 3 figures after the dot. Apparently it's not obvious for Labels.

View 2 Replies


ADVERTISEMENT

Label Making (take The Information And Incorporate It Into A Label Format)

Jan 14, 2009

I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer

Customer: ABCD
Customer PO: 12345

Part Number Quantity
AB 1
** 15
EF 22
GH 14

and I need it to output:

CUST: ABCD PART: AB
PO: 12345 QTY: 1

CUST: ABCD PART: **
PO: 12345 QTY: 15

CUST: ABCD PART: EF
PO: 12345 QTY: 22

CUST: ABCD PART: GH
PO: 12345 QTY: 14

View 4 Replies View Related

Set Label Control Captions To A Cell Text/Value

Aug 23, 2006

I have an excel application that I'm developing that is going to be used by two different departments. On one side everything will pretty much be userforms. The sheets they the data I need to pull in for them is on sheets that I have such that their visibilty is equal too xlveryhidden. I'm trying to change the captions on labels using the data on the veryhidden sheets. Something like this.

'frmCurrentProposal is a userform
'lbGroupName and lbGroupNum are both labels that should vary

frmCurrentProposal.Show
frmCurrentProposal.lbGroupName.Caption = Sheet2. Range("B2").Value
frmCurrentProposal.lbGroupNum.Caption = "Group # " & Sheet2.Range("B3").Value

The labels are not changing their values.

View 8 Replies View Related

Fraction Char / Display One-third In Userform Label Control?

Nov 26, 2013

Is there any way to display one-third 1/3 in a Userform label control?

View 9 Replies View Related

Userform Label Format

Jun 12, 2007

I am trying to format a label as a number with two decimals. I have searched this and other forums and see code such as:

Label18.Caption=Format(sheet1.Range("A!").Value, "0.00")

It always gives me an error: "Wrong number of arguements or invalid property assignment"

The word "Format" is highlighted.

I have tried putting the code in userform Initialize and also Activate. I am using Excel 2002.

View 9 Replies View Related

VBA Data Label Format

Mar 21, 2008

I have a plot that shows the position of a drifting buoy in the ocean. I have created a second series that is just the most recent position of that buoy. Everyday, using VBA, I update the chart 2nd series to point to the location of the new lat and long. For this second series, which is only one point, I have data labels turned on. I replace the data label text with the date and time of that latest position. Here is my problem. I can not find a way to format the date. No matter what I try, it has the format mm/dd/yyyy hh:mm AM/PM. I really just want it to be a 24 hour clock (mm/dd/yy hhmm).

I have tried forcing the format of the variable date_of_latest_pos, I have tried changing the cell format that contains the actual date and time...

ActiveChart.SeriesCollection("Latest Position").ApplyDataLabels AutoText:=True, LegendKey:= False, ShowSeriesName:=True, ShowCategoryName:=False, ShowValue:=False, ShowPercentage:=False, ShowBubbleSize:=False
ActiveChart.SeriesCollection("Latest Position").Points(1).DataLabel.Select
Selection.Characters.Text = date_of_latest_pos
Selection.AutoScaleFont = False
With Selection.Characters(Start:=1, Length:=23).Font
.Name = "Arial"
.FontStyle = "Regular"
.Size = 8
.Strikethrough = False
.Superscript = False
.Subscript = False
.OutlineFont = False
.Shadow = False
.Underline = xlUnderlineStyleNone
.ColorIndex = xlAutomatic
End With

View 9 Replies View Related

Column Label Format After Pivot Refresh

Jan 15, 2014

After pivot refresh, several individual cells of column labels are rotating again from vertical to horizontal.

How can I fix this format?

15-01-2014 8-47-31.png

View 6 Replies View Related

Userform Activate Label In Correct Format...

Nov 19, 2009

Userform Activate Label in correct format. I have the following code in a userform activate

View 2 Replies View Related

Convert / Transpose Label Format To Rows

Feb 20, 2008

I need a list with a row of column headers (optional but recommended) and then rows of data. An example of what I'm working with is as follows:

ALAMEDA FAMILY SERVICES
ALAMEDA FAMILY SERVICES
2325 CLEMENT AVENUE
ALAMEDA, CA 94501

ALLIED RE-ENTRY PROGRAM
ALLIED FELLOWSHIP SERVICE
1524 29TH AVENUE
OAKLAND, CA 9460L

ALLIED FELLOWSHIP SERVICE
ALLIED FELLOWSHIP SERVICE
1851 10TH STREET
OAKLAND, CA 94606...........

View 3 Replies View Related

Pass Userform1 Label Content To Label On Userform2

Jun 13, 2013

I have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.

VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm

View 3 Replies View Related

Automatic Decimal Format Control

Sep 30, 2008

I need to control the amount of decimals allowed by the entry of another column same row so I do not have to format the cells everytime to get the correct decimal places. I need all my data in one table so I can do pivot tables.

View 14 Replies View Related

Monthview Control Date Format

May 3, 2013

I'm trying to use a Monthview Control to put a date in a textbox and need the format to be in 'dd mmmm yyyy'.

The problem is that whilst I can get the date in that format, it is US format - so it is putting today in as '05 March 2013'.

View 2 Replies View Related

Format Control Creating Text Box

Jan 29, 2007

I am trying to create a text box using the format control, however, everytime I click on the box it go to visual basic editor. I believe I'm missing something. I am not familiar with visual basic.

View 9 Replies View Related

Format Control Not Showing Up In Combo Box

Apr 7, 2007

I'm starting to figure out this Combo Box filter stuff but the problem I'm having is when I right click on the Combo Box to enter the Control tab in the Format Control menu, the Control tab is not there. how to get the Control tab to show up?

View 2 Replies View Related

Creating A Date Format Using OCW Chart Control

Jan 18, 2009

I am using the VBA Chart Control and I have the following instruction;

Me.ChartSpace1.Axes(ChartAxisPositionEnum.chAxisPositionCategory).Numb erFormat = "mm/dd/yy"

The chart is a "chChartTypeLine". the problem is that i cannot change the format of the X-Axis to a Date (mm/dd/yy) format no matter what I try? I keeps wanting to keep it as "General", here is the code;

Private Sub CommandButton1_Click()
Dim ser As ChSeries
Dim cht As ChChart
Dim MinValue As Double
Dim MaxValue As Double

MinValue = Sheet1.Range("D2").Value + 10
MaxValue = Sheet1.Range("A2").Value

View 9 Replies View Related

Pivot Chart : No Control Of The Axis Format

Sep 21, 2006

I made a pivot chart. On the X axis are days of the year. I would like the axis to give the months rather than the days, because it is easier to read. But when I select the chart's axis, I don't have acces to any "number" sheet in the "Axis format" section. I could just change the scale.

ActiveChart.Axes(xlCategory).Select
With Selection.TickLabels
.Alignment = xlCenter
. Offset = 100
.ReadingOrder = xlContext
.Orientation = 45
.NumberFormat = "[$-41D]mmmm;@" 'I added this line
End With
ActiveChart.HasPivotFields = False

View 3 Replies View Related

Get VBA To Recognize Label In Userform As Value And Have Another Label Calculate From It

Aug 17, 2012

I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.

This is what I currently have. This returns $0.00 in the label value but does not calculate...

Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""

[Code]....

The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..

View 4 Replies View Related

Label Caption Does Not Appear Until Label Is Clicked?

May 13, 2014

I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?

Also example of my code is:

Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub

View 3 Replies View Related

Label Scatterplot Chart: Plot Two Values Against Each Other Using A Scatterplot, And Label Each Service

Feb 13, 2008

I'm working for a local authority who have been given a mass of survey data. In this particular task, residents of each small district within our area have been asked their levels of satisfaction with a service, and how important they think that service is. I want to plot these two values against each other using a scatterplot, and label each service.

Excel does not automatically allow this so I used a very good sheet from the forums here: Attach labels with names to the points in a scatter plot. It's the top file, and works well. However, I can't seem to customise it for my own data.

Problems include:

- Excel often freezing when I try to run it
- Not all the data being picked up for the chart
- Incorrect labels being picked up..........

View 4 Replies View Related

Avoid Hard Coding Control Name Inside Control Event Procedure?

Mar 4, 2014

Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?

It might be clearer to explain by a dummy code example:

[Code] ......

I'm seeking what I would need to replace Line1 with.

View 11 Replies View Related

Select Next Control / Cell On Worksheet After Enter In Control

Jan 9, 2008

Within the ComboBox properties, is there anyway to control after "enter" his hit, you move to the right instead of down (similar to the edit under Tools/Options)?

View 9 Replies View Related

Drag From Treeview Control To Spreadsheet Control

Jan 12, 2007

I have created a userform within VBA which has a TreeView Control and a Spreadsheet control on it.

I have populated the TreeView control with data and what I want to be able to do is to drag the nodes off the TreeView control to the spreadsheet control.

I can drag onto a normal worksheet but not onto the spreadsheet control (the no drop mouse pointer keeps showing).

View 4 Replies View Related

Determine Active Control On Multipage Control

Oct 4, 2007

How do I determine which control the user is currently modifying on a multipage form (either changing, enterying or exiting the specific control). when I use "userform1.activecontrol" i get "multipage1" as the control name but I need the actual control on the specific active multipage. (also the .TABINDEX is for the multipage regardless of the on-page control) I use a generic data-field change SUBroutine so need the control name (and the TABINDEX) to provide my SELECT CASE. (so every fieldname_CHANGE calls the same SUB [with no parameters])

View 3 Replies View Related

VBA Calendar Control Without Control

Mar 12, 2003

Has anyone out their ever seen an Calendar type of control totally built in an Excel vba UserForm?

My problem that Iíve tried to resolve for some time is utilizing some type of pop-up calendar to eliminate format issues in my published Excel forms. I have tried a number of calendar controls but all have to be registered on the local machine and this cannot be guarantied for every machine.

If someone could direct me to a vba UserForm that has this built in that might do the trick. Or is their another way to deal with this?

View 9 Replies View Related

Label Printing

Dec 12, 2008

I need to print quite a few mailing labels for Christmas cards from an Excel 2000 Worksheet. Could someone list the steps I must take to do this?

View 2 Replies View Related

Label Not Defined

Jan 14, 2012

Code:
Sub test1()
Dim a, e, i As Long, ii As Long, b(), x
With Range("a1").CurrentRegion
a = .Resize(.Rows.Count - 1).Offset(1).Value

[Code] .........

View 9 Replies View Related

Label Animation

Feb 13, 2009

how to make the text in a Control Tool Box "Label". On Load, show text one letter at a Time?

View 9 Replies View Related

Add Text To Label

Jul 21, 2006

I have a textbox with a label & he will type in his name in the textbox & it appears on the label. Is there any way to put the word "Hi" on the label & then have his name appear after "Hi" on the label. I can do it using 2 labels side by side but I would like to have it all on 1 label

View 3 Replies View Related

Find The Last Label

Jul 26, 2007

I am trying to create a button where it automatically copys and paste a label. I need to change the label name from the original to say "New". Since this button will be used constantly, how do I find the last Label copied, and change the caption on that lable? If you look at the code I have, you would see that it calls for a specific Label number to be changed (Label 826).

Sub CreateANewPN()
Dim LastRow As Long
Dim SecondLastRow As Long
Range("I65536").Select
LastRow = Range("I65536").End(xlUp).Row
SecondLastRow = LastRow - 1
Range("A" & SecondLastRow, "A" & LastRow).Select
Range("A" & SecondLastRow).Activate
Application.CutCopyMode = False
Selection.EntireRow.Copy
Range("A" & SecondLastRow).Select
Range("A" & SecondLastRow).Activate
Selection.Insert Shift:=xlDown
ActiveSheet.Shapes("Label 826").Select
Application.CutCopyMode = False
Selection.Characters.Text = "NewPN"
End Sub

View 2 Replies View Related

Split Label Value Into A Combobox

Aug 17, 2014

i am populating a form, one label on the form accepts a string (2, 3, 6, 7) or (45, 46, 49) without the brackets. ie. LblWrd

VB:

For i = 2 To final
If BxSC = ws.Cells(i, 43) Then
LblWrd = ws.Cells(i, 44)
ElseIf BxSC = ws.Cells(i, 45) Then
LblWrd = ws.Cells(i, 46)
ElseIf BxSC = ws.Cells(i, 47) Then

[Code]...

i want to take those values, split them at the comma and place them into an array. That array then populates a combobox.

something along the lines of:

VB:

Private Sub BxWrd_Click()
Dim arr() As Variant
Dim splitTarget As Variant
Dim splitString As String

[Code]....

but i am not sure how to get there.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved