I added a custom add in ages and ages ago and have forgotten how I did it! I'm now trying to remove it but not having much luck.
Its not listed in the Tools>References menu and its not added on to a workbook saved in the C:Documents and SettingsUserApplication DataMicrosoftExcelXLSTART folder.
Are there other ways I could have added it? If so can someone let me know as I might be able to remove it then!
I'm trying to make a converter between about 8 various types of values. These are not units like Km or miles or something like that, but rather numbers that represent a specific "hardness value" on a variety of scales (to name a few: HRC, HRA, K)
What I've been doing so far is plotting the two types against eachother and then getting the best trendline I can so that I can use that formula to convert between the two with relative certainty. (for example, when plotting HV vs HRC my fourth order polynomial trendline with an Rsquared of 1 is y=0.0001x4 - 0.0188x3 + 1.0768x2 - 20.709x + 350.69)
My questions comes up where I was hoping to make a window or box of some sort allowing the user to input a numeric value, then selecting the Input units and the hopeful output calculated units, and have the box spit back to the user the conversion.
I want to be able to create a range of VBA userforms to quickly perform long tedious tasks. I want these userforms to be accessed from a nice tidy toolbar.
I have done this and it looks nice and works well. What I would like to be able to do is have my custom toolbar of userform controlled functions be transferable so that if someone else wants my toolbar and attached functions they can install it easily much the same way you can do with an add in.
Is this sort of thing possible or does it require them to manually install all my userforms, modules and toolbar? If it is possible what sort of things should I be looking at?
If I send a workbook out with the zoom set at 90...will the zoom be at 90 when others open it.? Also, is there a worksheet event that I could insert to force a specific worksheet to always open with the zoom at 90??
View 2 Replies View RelatedI have a 9 digit number that I want to format as 999.9999.99 Can anyone tall me how? Does anyone know a good link with pointers on custom formats?
View 9 Replies View RelatedWhen using format cells > number >custom I want to custom oC with the degree symbol in superscript. how to get superscript into the custom box? Also where is the superscript icon for the quick access toolbar in Excel?
View 3 Replies View RelatedI am trying to sort a sheet based on the values in a column.
S, SI, M, MI. and it need to be sorted only in this order.
I am working on a excel file to help me interpret survey data. I am having some problems transposing data from tab1 to tab2. So basically, I need all the data from Z on tab1 to be transposed on individual lines on tab2, attached.
View 5 Replies View Relatedi had a play with a document that contains a custon menu bar and now the menu bar is always there.
the code that puts up the menu bar is ...
I am trying to add aright click menu item a cell.
I am using the following code in a module.
Sub addmenu()
Set nbar = Application.CommandBars("Cell")
Set ntrnew = nbar.Controls.Add(Type:=msoControlButton)
ntrnew.Caption = "Paste In"
ntrnew.Visible = True
ntrnew.BeginGroup = True
ntrnew.FaceId = 110
ntrnew.OnAction = "Test"
To trigger the first code when needed.
I know this all works when I put it in brand new workbook it works my custom menu appears and I can run the the "Test sub"
However as soon as I put this in the workbook where I want this to work it does not show the menu.
It is there though as when I step through the remove Sub I can see it matched and then deleted.
I thought at first it was protection but that is now removed but still no joy.
I can not see any setting that controls these sub menus.
I am writing some custom functions to be saved in an Add-In file, but am having trouble saving named ranges. I would like named ranges in the Add-In file to be available in other spreadsheets. Is there a way to do this? Or is there a way to take a range from Excel and save it into a globally available named range using VBA?
View 9 Replies View RelatedI would like to custom sort a table by ID, the first ID to be shown on top would be the ID the user enters in an inputbox. Below is the code I used but I don’t know why its not working:
Sub CustSort()
Dim MyCount As Integer
MyCount = Application.CustomListCount + 1
MyValue = InputBox("Enter ID")
Application.AddCustomList Array(MyValue)
ActiveSheet.UsedRange.Sort _
Key1:= Range("A1"), _
Order1:=xlAscending, _
Header:=xlYes, _
OrderCustom:=MyCount, _
MatchCase:=False, _
Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Application.DeleteCustomList MyCount
End Sub
find attached an example, try entering 300000 in the inputbox the custom sort doesn’t work
to complete the attached worksheet. My aim is to “bring” into the RANGE column the contents of corresponding cells in that column whose name is chosen in the Select dropdown. I suspect that one of these lookup and reference functions can do this task but am lost as to which one of them:
CHOOSE
COLUMN
COLUMNS
HLOOKUP
INDEX
LOOKUP
MATCH
ROW
ROWS
VLOOKUP
With page breaks in Excel, is it possible to have different pages span a different number of columns?
Right now, I have my page breaks laid out so I've got 3 separate pages. Currently, they are each 30 rows in height, and 30 columns in width.
However, I want the first one to be 20 columns wide, the second to be 30 columns wide and the third to be 40 columns wide.
If I try and drag the vertical blue bar, I adjust the column span for all 3 pages. I need a way to drag the vertical blue bar for each page separately.
I am wanting to create a custom function that i can enter into a cell to run a macro (MyMacro). I do not know how to write a function, but so far i have:
Public Function Run(MacroName As String)
Application.Run MyMacro
End Function
I've got a few worksheets that have staff names on Col A. And these names are under sub headings of what position they work in (Foremen, Operatives etc..).
Before I had access to them, the names were not in order, now I've change it to A-Z, for each staff under their position.
I know you can make your own custom order list, so the list goes top to bottom : Supervisor, Formen, Operative, Office.
What I sometimes need to do is sort Col B or C. But is am unable to sort it back to it's original state
Attached is an example of how I would like my spreadsheets to look. But is there a way to use Sort & Filter so it sorts the entire table by position, keeping the correct name under the correct position heading.
New Microsoft Excel Worksheet (2).xlsx‎
I need to create a custom number format for a recorded delivery number in an excel sheet. I want it to look like AA 1234 1234 1GB in the cell even if the user enters it without spaces e.g. AA123412341GB. I have had a bit of a play around with underscores to get spaces but nothing seems to make it change.
View 4 Replies View RelatedIf I have the following info:
A1 = 5
A2 = -4
A3 = 0
How can I use Format Cells > Custom to have them display as:
A1 = 5 up
A2 = 4 dn
A3 = Level
I've been trying and trying but keep getting a message that I should use one of Excel's pre-defined formats.
What I have is a table with over 20 columns that I use to sort and AutoFilter the 200+ rows of data. Several of the columns use Data Validation which require data to be from lists.
So, my problem occurs when I add a new row of data... I don't want all the values in the row to be blank (Some values should never be blank... This is why Data Validation was used here). Is there any kind of New Entry feature or some easier way to enter a new row of data? I know some other Office applications that use an easy UI to 'fill in' data types when a new entry is added.
At the very least, since it might be the only plausible result, I'd like a new row of data to result to default values (i.e. the top value in the list) in the columns that have data validation since should not be accepting blank values.
Also, I am very good with formulas and finding my way around Excel's features, but I'm not very experienced with the VBA programming or custom macro-writing.
I'm working on a workshet where ppl fill in vehicle numbers, but they all find their own unique ways to fill them up. Some of the examples are below:
MH 04TN 2315
HR 38G 9605
9605G
H9425
TN04A8451
GJ04 GA5142
KA 0072
3,4,7 are incomplete nos. while 1,2,5,6 are all complete nos. I want the format of these above nos. to look like this:
2315TN/MH04
9605G/HR38
9605G
9425H
8451A/TN04
5142GA/GJ04
0072KA
Can this be done automatically in a worksheet using the custom cell format function??.... because then it wud get formatted as necessary whenever someone enters a vehicle no. in that particular column.
Custom average function. can this be done with Worksheet functions:
View 4 Replies View RelatedI am trying to get a phone number column to change between two custom styles. I have added the styles in as:
Mobile: 0000 000 000
Extenstion: x00000
I need column E5 down to change between the two if < 6 or >5 numbers are used in a cell to change to the correct style.
Does this can be done just using the styles or vba coding is required.
I already have some vba to add the date into column B if column A is altered.
How to create custom formatting for cells like (%.00##).
View 2 Replies View RelatedI have a sheet which uses a 'Custom Format' in column A, '00000' to give each row a unique reference. Is there any way to do a 'Find' using this format, e.g. 00012, rather than just 12. Searching using '00012' doesn't find the appropriate cell, whereas using '12' does?
View 4 Replies View RelatedThis just a shot in the dark, but does anyone have a custom function that calculates the check digit for a cusip? http://en.wikipedia.org/wiki/CUSIP
The algorithm is listed above.
if there's a way I can verify that a custom add-in is active? My company uses an add-in to allow end users to construct several types of API calls. My program depends on that add-in to be installed. I'd like to try to detect the add-in and halt the program if it's not there.
View 3 Replies View RelatedI'm trying to write a macro that will custom filter a column for cells containing the value in a cell, the macro I have so far is:
Sub Filter()
ActiveSheet.AutoFilterMode = off
LookupVal = Range("C3")
Range("A8").AutoFilter Field:=4, Criterial:=LookupVal
End Sub
However that only returns cells that are equal to C3, normally to do contains I would put "* *" around the value but then that removes the reference to cell C3.
Imagine i have 2 columns: Open and Close, both of these got numbers like
1 ---- 2
3 ---- 1
4 ---- 10
and so on. I had to make a function which checks if some number is in between any of those Open and Close numbers and count how many, for example: im searching for number 1.3, so according to previously drawn table i would get answer of 2, because 2 is in between 1----2 and 3-----1, i achieved this by a simple function:
=IF(OR(AND(Bendras!$J$1>=Table1[[#This Row],[Open]],(Table1[[#This Row],[Close]]>=Bendras!$J$1)),AND((Bendras!$J$1<=Table1[[#This Row],[Open]]),(Table1[[#This Row],[Close]]<=Bendras!$J$1))),TRUE,FALSE)
this generated an additional column with TRUE and FALSE values which i counted with:
=COUNTIF(Table1[T/F],TRUE)
and got the answer.
so now then preparations are ready i need to make a function which would for example if the number i was searching was in 10th and 45th rows find the MAX/MIN values of Close column between those rows(hope i made my self clear)
this is how i was hoping to do that : first of all make a new array of all cell addresses from "Close" column which were "TRUE" from the first function i wrote and when do w/e i like with those cell addresses in other functions.
Just curious as to what could make a custom menu or custom button disappear from Excel upon opening it. I had created a custom menu with personal.xls macros in it for someone here a while back, and today it was completely missing.. although the Personal.xls folder still existed with the macros.
I am quite sure that they did not manually remove the menu by right-clicking and selecting Customize and dragging back the menu items...
I created a formula to stop me from having to do an If statement in the case of an error in one of the variables...I'm pretty sure it work fine in all cases I used yesterday, but today when I use the formula to calculate eCatch (e8+e9,e9) the formula result is #name, even when then e8 and e9 are numbers...the vba is embedded in a module in the excel sheet used, so I'm not sure why its coming up with the error.
View 4 Replies View Related