I am working on a excel file to help me interpret survey data. I am having some problems transposing data from tab1 to tab2. So basically, I need all the data from Z on tab1 to be transposed on individual lines on tab2, attached.
View 5 RepliesHow would I create a shortcut to automatically copy the contents of cell H1 to cell K1, in other word I would like to hit a shortcut key and have the contents of that cell pasted 3 cells to the right on the same line. I have to do this over and over again down the worksheet. I am working on taxes and want to copy values over to the expenses column as I find them.
I would also like to know if it is possible while having cell D1 highlighted I could have a shortcut created that would copy the value three cells over in H1 to cell K1. That would be the fastest, but I don't know if it is possible?
i am writing a custom copy/paste routine which will paste data from a selection if the cell being pasted to is not locked.
The user will select the text for coping and then launch the routine.
The routine will query for destination cell and then process the paste.
This is my routine so far:
Sub testCopy()
Dim c As Range
Dim MyRange As Range
Dim Dest As Range
Set MyRange = Selection
Set Dest = Application.InputBox(prompt:="Select a cell", _
Title:="Paste Destination", Type:=8)
For Each c In MyRange
If Dest.Locked = False Then
Dest.Value = c.Value
End If
'dest = ?
Next c
End Sub
What I need to know is how to increment the dest reference so it is in the same 'relative' position from the initial dest that c (from the selection) is in or is there a better way to do this?
Below is a macro I recorded to help copy 'Paste Special - values only' data between two spreadsheets that have different colour and conditional formatting in cells.
However, if this is run and there is no data to paste, it throws up the End and Debug error.
Any chance that someone knows that if there is no data sitting on the Clipboard, then a msg box would appear saying "Please select the data you require to be copied" in the message box.
Sub data_input()
ActiveSheet. Unprotect
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("B5:AG4804").Select
Selection.sort Key1:=Range("B5"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Range("B5").Select
ActiveSheet.Protect
End Sub
what I do with excel: I have an excel sheet that has over 18,000 rows in it. Since it would be a nightmare to scroll around to find what I want, I use the Custom Sort and Filter options under Editing>Sort&Filter. So for example, I can omit 17,800 rows using a specific setting so that I can work with a more reasonable 200 rows. Moreover, the 200 rows comes from all over the spreadsheet. Meaning their row numbers are not always consecutive.
Here's the problem: Whenever I try to copy anything from this "edited or filtered" excel sheet, the resulting paste is not an exact copy. Excel perfectly copies the first rows up until the point where the row numbers ceases to be consecutive. So, the copy function messes up somehow when the data being copied comes from a different section of the original 18,000 rows.
In case this isn't clear enough...
Let's say that the original file has rows 1,2,3,4,5,6,7,8,9,10
Once I filter/custom sort, I see rows 1,2,3,8,9,10
When I try to copy/paste 2,3,8,9, excel copies 2,3, but messes up the rest of the 8,9. And I end up with a totally useless copy that's generally shorter than it's supposed to be.
Is it possible to copy text from a Excel worksheet and paste it into the custom header or can you just type in the three boxes?
View 1 Replies View RelatedWhen I go one column and Click custom filter and give the command one number and or another numbers ( I Have attached an excel sheet with screen shot) This filters the data, and I need to copy the same and paste in the next sheet.
I have to do like this for about 20 times for 20 sets of data). I have already done this and pasted the data in sheet2. I did everything manually. ( sample sheet is attached) I need a macro to do this work for me.
When I run the macro If get 2 text boxes I can enter the numbers. and click ok,the data has to filtered in sheet1, and result has to be pasted in the next sheet.with the header. Again I will run the macro i will give 2 numbers and the result should be pasted in sheet 2 after the 1st set of data leaveing one row as blank. ( exactly like the sample data in sheet 2). If I run the macro for 10 times giving 10 different numbers, the result should be pasted one after the other in sheet 2.
I'm trying to make a converter between about 8 various types of values. These are not units like Km or miles or something like that, but rather numbers that represent a specific "hardness value" on a variety of scales (to name a few: HRC, HRA, K)
What I've been doing so far is plotting the two types against eachother and then getting the best trendline I can so that I can use that formula to convert between the two with relative certainty. (for example, when plotting HV vs HRC my fourth order polynomial trendline with an Rsquared of 1 is y=0.0001x4 - 0.0188x3 + 1.0768x2 - 20.709x + 350.69)
My questions comes up where I was hoping to make a window or box of some sort allowing the user to input a numeric value, then selecting the Input units and the hopeful output calculated units, and have the box spit back to the user the conversion.
I want to be able to create a range of VBA userforms to quickly perform long tedious tasks. I want these userforms to be accessed from a nice tidy toolbar.
I have done this and it looks nice and works well. What I would like to be able to do is have my custom toolbar of userform controlled functions be transferable so that if someone else wants my toolbar and attached functions they can install it easily much the same way you can do with an add in.
Is this sort of thing possible or does it require them to manually install all my userforms, modules and toolbar? If it is possible what sort of things should I be looking at?
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
Unfortunately we use excel 97 in the office.
I have a macro that does lots of cutting and pasting, and to make sure it can run without interference from my normal work, I did add the line Application.Interactive = False. But seems while I am cutting and pasting in other windows while the macro runs, sometimes it crashes on the paste part. Is the macro and the Windows Operating system sharing the clipboard?
FYI, Windows XP professional, Excel2000.
I m working with office 2003 pro in Windows XP.
2 Excel questions:
Is there a way to make the "paste" option in excel "sticky" (that is, so that you can do some other work in excel then come back and click "paste"? currently excel makes you go back and recopy then only can you paste. You cannot do anything between "copy" and "paste".
Is there a way to paste so that the cell is exactly copied? What i mean is, so that the formulas that are copied are pasted exactly as they were (without changing references)? (i get the right result when draggin and moving a cell, except that the original cell is emptied - but u get the idea). A work around is to add absolute refrences, and then take them away later - or to copy the formula in the formula bar and then paste it into another cell (one cell at a time ... )
I've tried to change the line highlighted in red to 'Sheets("Financial Accounts").Pastespecial After:=Sheets("changes")' but the macro crashes.
Sub ConsolidatedTotals()
Dim BeforeSheetName, NextPageName As String
BeforeSheetName = "changes"
NextPageName = "Financial Accounts - " & Worksheets("assumptions").Range("c3")
Worksheets(ActiveSheet.Name).Select
Sheets("Financial Accounts").Copy After:=Sheets("changes")
ActiveSheet.Name = NextPageName
End Sub
I got this code the other day
Private Sub CommandButton11_Click()
Sheets("Invoice Page").Select
Rm = 3
For c = 1 To 5
Rm = Application.WorksheetFunction.Max( Cells(1000, c).End(xlUp).Row, Rm)
Next c
Range(Cells(3, 1), Cells(Rm, 5)).Select
Selection.Copy
Sheets(" Records Page").Select
c = Cells(3, 256).End(xlToLeft).Column + 2
Cells(3, c).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
And instead of pasting the cells i want it to paste speical so it just pastes values rather than formulas.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
I added a custom add in ages and ages ago and have forgotten how I did it! I'm now trying to remove it but not having much luck.
Its not listed in the Tools>References menu and its not added on to a workbook saved in the C:Documents and SettingsUserApplication DataMicrosoftExcelXLSTART folder.
Are there other ways I could have added it? If so can someone let me know as I might be able to remove it then!
If I send a workbook out with the zoom set at 90...will the zoom be at 90 when others open it.? Also, is there a worksheet event that I could insert to force a specific worksheet to always open with the zoom at 90??
View 2 Replies View RelatedI have a 9 digit number that I want to format as 999.9999.99 Can anyone tall me how? Does anyone know a good link with pointers on custom formats?
View 9 Replies View RelatedWhen using format cells > number >custom I want to custom oC with the degree symbol in superscript. how to get superscript into the custom box? Also where is the superscript icon for the quick access toolbar in Excel?
View 3 Replies View RelatedI am trying to sort a sheet based on the values in a column.
S, SI, M, MI. and it need to be sorted only in this order.
i had a play with a document that contains a custon menu bar and now the menu bar is always there.
the code that puts up the menu bar is ...
I am trying to add aright click menu item a cell.
I am using the following code in a module.
Sub addmenu()
Set nbar = Application.CommandBars("Cell")
Set ntrnew = nbar.Controls.Add(Type:=msoControlButton)
ntrnew.Caption = "Paste In"
ntrnew.Visible = True
ntrnew.BeginGroup = True
ntrnew.FaceId = 110
ntrnew.OnAction = "Test"
To trigger the first code when needed.
I know this all works when I put it in brand new workbook it works my custom menu appears and I can run the the "Test sub"
However as soon as I put this in the workbook where I want this to work it does not show the menu.
It is there though as when I step through the remove Sub I can see it matched and then deleted.
I thought at first it was protection but that is now removed but still no joy.
I can not see any setting that controls these sub menus.