I have a macro that does lots of cutting and pasting, and to make sure it can run without interference from my normal work, I did add the line Application.Interactive = False. But seems while I am cutting and pasting in other windows while the macro runs, sometimes it crashes on the paste part. Is the macro and the Windows Operating system sharing the clipboard?
FYI, Windows XP professional, Excel2000.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedHTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
Unfortunately we use excel 97 in the office.
I m working with office 2003 pro in Windows XP.
2 Excel questions:
Is there a way to make the "paste" option in excel "sticky" (that is, so that you can do some other work in excel then come back and click "paste"? currently excel makes you go back and recopy then only can you paste. You cannot do anything between "copy" and "paste".
Is there a way to paste so that the cell is exactly copied? What i mean is, so that the formulas that are copied are pasted exactly as they were (without changing references)? (i get the right result when draggin and moving a cell, except that the original cell is emptied - but u get the idea). A work around is to add absolute refrences, and then take them away later - or to copy the formula in the formula bar and then paste it into another cell (one cell at a time ... )
I've tried to change the line highlighted in red to 'Sheets("Financial Accounts").Pastespecial After:=Sheets("changes")' but the macro crashes.
Sub ConsolidatedTotals()
Dim BeforeSheetName, NextPageName As String
BeforeSheetName = "changes"
NextPageName = "Financial Accounts - " & Worksheets("assumptions").Range("c3")
Worksheets(ActiveSheet.Name).Select
Sheets("Financial Accounts").Copy After:=Sheets("changes")
ActiveSheet.Name = NextPageName
End Sub
I got this code the other day
Private Sub CommandButton11_Click()
Sheets("Invoice Page").Select
Rm = 3
For c = 1 To 5
Rm = Application.WorksheetFunction.Max( Cells(1000, c).End(xlUp).Row, Rm)
Next c
Range(Cells(3, 1), Cells(Rm, 5)).Select
Selection.Copy
Sheets(" Records Page").Select
c = Cells(3, 256).End(xlToLeft).Column + 2
Cells(3, c).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
And instead of pasting the cells i want it to paste speical so it just pastes values rather than formulas.
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Windows("estimate sheet one.xls").Activate
I need a macro to get the values from cells D29 and H24 in the Resource Calculator sheet and populate it into cells N8 and O8 in the Input form.
Users will then be able to change the information in the calculator and click the macro again to populate N9 and O9 and so on.
Is there a way to do this?
I've attached the file for you to see.
If i wanted a cut a chunk of a data and paste it on another sheet how would i do this using a macro?
Considering the range can be different everytime.
I have this:
Rows("1948:2001").Select
Selection.Cut
Sheets("Non BW data").Select
Range("A1").Select
ActiveSheet.Paste
But can i use an if statement? using names of people, ie cut cells A1:B1 if = John?
I need a a macro I can run about 5000 times to move data around in a spreadsheet. The ones I tried to create loop and screw everything up.
I want to:
click on a cell of data in Column A
Cut/copy
F5
input the new cell destination
paste in the new cell
go back to column A one row down
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies View RelatedCan I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies View RelatedI'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
I am trying to write a macro for CUT & PASTE from one column to another.
The data is always in cell 'I', and should be transfered to cell 'F' (CUT & PASTE).
However, not all the cells in column 'I' are populated, therefore it is required to skip the empty cells.
I tried writing a macro to copy data from one tab and paste it on another. It gave me an error message every time.
So I tried recording one doing just that, and when I went to play it, it still gave me an error.
So here is what I came up with:
I am trying to do a paste special of this code from Paul into a specific cell so that when the conditions are met the cell will update automatically. The code works great, I just have to manually run it.
I have tried to copy all of it as it stands here then use the paste special, paste only values; but it pastes the text in the cell and adjacent cells. I have done this before successfully with simple formulas, not actual code. The cell is clean where I want to paste this also, no strange formatting or anything like that.
I have this great code but can not use it….
Sub test()
If Range("B13") <= Date Then
Range("E13").Copy
Range("F13").PasteSpecial Paste:=xlValues
Application.CutCopyMode = False
End If
End Sub
I have some simple Macro code that works fine for the COPY side of the action...
View 14 Replies View RelatedI have a macro that copies the main report sheet in my workbook. The point of the macro is to get a copy of the report data without allowing anyone to see the formulas/data behind it - when it pastes, it pastes only the values in the tables and then copies the charts, deletes the live ones, and pastes only the images back on the sheet. The macro works on my computer and my partner's computer, but not on anyone else's. It stops at this point:
View 5 Replies View RelatedSorry to be leeching again. Those who can code, those who can't, ask.
I have a spreadsheet with daily temperature readings. The first row contains the headings: Day, Jan, Feb, ....., Year. The "Day" column goes from 1 to 31 and continues again. Hope you get the picture.
My problem: I imported these data from a text file but Excel couldn't align the data properly. Hence I need a macro to realign some of the data onto the correct cells. Here's a simple alogrithm I've worked out:
I need to move cells from i) (C31:L31 to D31:M31); ii) H32 to M32; iii) G32 to K32; iv) F32 to I32; v) E32 to H32; vi) D32 to F32; vii) C32 to D32 for every 31 cells, i.e. the next to be moved are C62:L62 to D62:M62 and so on.
By right, this is simple enough for me to write a code but the snag comes because for non-leap years, I need to add a code which move cells C30:L30 to D30:M30.
I don't think a code that shift cells every 31 rows would help due to the leap years. Hence by my extremely limited knowledge of programming I think the only way is to tell Excel to recognize the kind of year it is, i.e. leap year or non-leap year (years are in column N) before executing the commands.
I work with large charts with many users updating them. With people not following directions metrics are getting messed up. I'm trying to come up with a macro that when someone tries to paste from a different version, or something they copied earlier, the workbook/worksheet will not allow it, so that they have to type in the required information to avoid errors. I'm now working in Excel 2007. It would be nice just to have this option within the program without having to lock down the workbook.
View 4 Replies View RelatedI have a total of 30 sheets in my workbook. I would like to copy rows 21:1000 from sheets 5 - 27 and paste them into sheet 4 starting on row 21. The data ranges vary within sheets 5 - 27. For example, sheet 6 has data in rows 21:50, whereas sheet 10 has data in rows 21:500. I chose 21:1000 as a safe measure to ensure that all data starting on rows 21 onward gets copied.
I am having trouble thinking of how to create a macro which will copy the data from sheets 5 - 27 and paste into sheet 4 leaving no blank spaces in between pasted rows. Ultimately my goal is to use the filter boxes I have set up in the column headers of sheet 4 to quickly sort all the data pasted from sheets 5 - 27.
im trying to record a macro that allows me to copy b22-b25 so i can copy it sp its on my clipboard to use in other applications
but i have this and it doesnt allow me to paste