I have an txtBox in a userForm. I need the value of the userform in a customized format i.e. the user will be able to enter only 5 digit numbers and after the value has been entered the txtBox should dispaly the value with prefix "A".
For example:
1. If user enters values as 56, then txtBox should display as A00056.
2. If user enters values as 12346, then txtBox should display as A12346.
How can I set the format of multiple textboxes to numberformat "#,##0.00#,##0.00)"?
View 9 Replies View RelatedI am creating a userform in vba with textboxes. Input (from user) into the textbox is copied to a worksheet in the workbook.
I one text box users will need to type numbers and in another they will need to type letters.
Can the textbox be formatted so it will only allow a number?
Can the text box be formatted to only allow text?
Is there proper syntax to combine these two lines of code into one line?
View 2 Replies View RelatedOn the attached example i have a user form (click Add New Hedge button) and on this form is a textbox for 'Avg. Price'. The value of entered from this box will go into the next available row in column on 'Unsettled Hedges' worksheet.
My problem is sometimes i would to enter the price as a fraction, e.g. 1/2 and other i would like to enter the price as a decimal, e.g. 1.5. At the moment if i enter the price as a decimal figure this will convert it to a fraction in column D of the 'unsettled hedges' worksheet.
What do i need to change in my code to make it enter the price in either format?
I have a textbox on a form that has a default value of 0.00. When the user enters a number I want it to format it to currency with two decimal places. I've tried form.textbox1.text = formatcurrency(textbox1.text,"0.00") but it won't format it to two decimal places.
View 2 Replies View RelatedI've got a UserForm with 2 textboxes.
TextBox1 requires the user to enter a %.
I don't want the end user to do anything to TextBox2 (I've got it set to Enabled=False). I would like TextBox2 to populate in $$ format based on a formula : TextBox1 % x Range("Sales_Price")
I can get TextBox2 to populate correctly, but I can't get it to convert to $$ format. Everything I've come across uses the 'Exit' or 'AfterUpdate' event - but I don't think I can use these events since the User won't actually be doing anything to TextBox2.
Code:
TextBox7.Value = Val(TextBox5.Value) - Val(TextBox6.Value)
How can i format the TextBox7 value like separated sample below.
1,500,000
I have a userform that contains textbox's that are linked to excel cells and i was wondering if there is a way to format the textbox to show the values in the number format. As the cells values are constantly changing the following code only works if the number is in the hundred of billions but if the number changed to 10,000 for example the format would not adapt.
Private Sub TextBox1_Change()
Me.TextBox5 = Format$(CStr(ThisWorkbook.Sheets("ISN").Range("H1").Value) * Val(TextBox1.Text), "###,###,###,###")
End Sub
I am using the following code to insert a $ for my txtbox. how can I add to it so that it will also show commas. For example if I type 35000, I want it to show $35,000.
Private Sub TextBox1_KeyPress(ByVal KeyAscii As MSForms.ReturnInteger)
If TextBox1.Text = "" Then TextBox1.Text = "$"
End Sub
what the format would be for 3 numbers in a userform textbox. No decimals, no symbals, just the 3 numbers.
View 4 Replies View Relatedtextbox1 on a userform populates textbox2 on a different userform via a command button.
how can i make sure textbox2 keeps the format from textbox1?
eg: when i enter 0.010 in textbox1 and click a command button to populate textbox2 on the 2nd form it produces a value of .01 instead of 0.010
In my Excel VBA user form, there are multiple instances of the MS DTPicker control, which feed multiple text boxes. These in turn are linked to named cells on an worksheet. Note at this stage please that dates will not always be required, hence the text boxes. Only the button on the DTP controls are visible, alongside the related textbox.
My problem is that the values in the cells are in US date format and I need them to be recognised in the UK date format. The dates therein must be formatted as dates (ie not as text), as they are used throughout other worksheets for calculations. In the sample below, DTPickerDateOfIncorporation is the named cell (the control source). I know from Roy's responses to other questions on the DTPicker that he doesn't use it - is there a better alternative?
I need to be able to format a textbox as curancy. Simple enough, right?
The problem is that this box is loaded from two sources. The first is automatic using the change event, this works well. The second is to enter directly into the textbox, which requires using the exit event, this also works.
The problem comes when I try to use both events. The change event interfers with the direct entry (the format keeps changing the entered value and will not allow the user to finish entering).
Private Sub TextBox1_Change()
TextBox1.Text = Format(TextBox1.Text, "$ #,##0.00")
End Sub
Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
TextBox1.Text = Format(TextBox1.Text, "$ #,##0.00")
End Sub
How can this be changed to work for both aut load and direct load?
I am making a user form in Excel 2007 and for some reason where I am using textboxes for a user to enter numeric values the output on the spreadsheet has a general format which is causing an IF function to return an incorrect value. Is there a way to make sure the output from the form is in "numeric" format?
View 10 Replies View RelatedI'd like to import some dates into some textboxes on a userform.
I'm also going to let the user edit these, however... what i'd like is for the user to be forced to:
1) enter a date in the format dd/mm/yy
2) Enter a valid date (eg, not feb 30th)
How can I formate the date in a text box on a user form. I want the date to appear as follow: yyyy/mm/dd
View 2 Replies View RelatedA particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
Code:
[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000
while trying to limit the user's input to a userform textbox to no avail. For example one textbox on the form should only be numbers and I therefore want to restrict the user to typing in a two digit code like 02 or 72 (not for calculations). Another textbox I only want to allow the user to input 6 characters in the format letter, four numbers and a letter. If the user inputs the wrong stuff a message box pops up and the focus is reset
View 8 Replies View RelatedWe have created a userform with several textbox for numbers. We'd like to show them with a format similar to "###,##0.00" and allow the users to enter numbers without commas, but always show the textbox formated. Is there any special way to manage this format? As the textbox is a "text" value, how can we manage the input and the numbers? Should we always replace the "," withi a nullstring? Example:
Private Sub tbCakPrice_Exit(ByVal Cancel As MSForms.ReturnBoolean)
tbCakPrice.Text = Format(Val(tbCakPrice.Value), "######0.00")
tbPxCakCnFCgl.Value = Format(Val(tbCakPrice.Value) + Val(tbFleteRealCgl.Value), "########0.00")
End Sub.......................
i have this userform which has 20 textboxes. these boxes are used for numbers only. however, i want my numbers, as i type them, to appear in the boxes with thousands separators. even if i don't type the commas, the numbers will be formatted as if i typed them with such. Do i have to format the textboxes one by one for the formatting that I want or there are codes that could be used for all these textboxes?
View 9 Replies View RelatedI have a textbox in an excel userform and want the display to be formatted. When "9.1" is entered "9.100" shows either before or after going to the next textbox on userform. The code below is not working.
Private Sub UserForm_Initialize()
txtWaste = Format(Me.txtWaste, "00.000")
End Sub
I have a calendar userform that enters a date into a userform textbox in the format mm/dd/yy.
I am in the UK, so default date format is dd/mm/yyyy but i need it as above - mm/dd/yy
So, when I get a MsgBox to repeat Textbox1.Value (the date from the calendar object, formatted mm/dd/yy) and repeat it in format dddd mmmm dd yyyy, it reads the value not as I want it, mm/dd/yy, but as the usual dd/mm/yyyy - so instead of reading 08/01/12 as Wednesday August 01 2012 it is giving me Sunday January 08 2012 - even though in the cells on the worksheet that are populated from the textbox, the date reads correctly, so 08/01/2012 is indeed 1st August 2012 not January 8th 2012...
So it's the MsgBOx function reading the textbox in the userform wrong, and formatting makes no difference...
Can I fix this without changing my regional settings? Is there a way to set the region in vba then unset when leaving the program? I don't want to have to change regional, and anyway, the program will be used by others who won't know / want to do that.
When I enter a number, say 2456 in this textbox why does it display "$2.45" instead of "$2,456". I've tried fiddling with the ###'s and .'s but it just gets worse.
[Code] ....
I would like to create a textbox that displays the typed numbers as currency format (similar to selecting currency format for a cell)
so that as the user types in 9999 they will see the textbox populate with
$99.99 instead of just $9.09 which is what happens when I try the following code
On the attached example, there is a user form with a text box and an enter button.
What i want, is when i press the enter button, the value in the text box goes into cell B2 on sheet1 in the format of "?/???".
I have the following code
Code:
Private Sub ComboBox1_Change()
TextBox1.Text = Range("P" & UserForm1.ComboBox1.ListIndex + 3).Value
TextBox2.Text = Range("N" & UserForm1.ComboBox1.ListIndex + 3).Value[code].....
In TextBox3, the user will input a percentage as a whole number, IE: 5 for 5%, but when the update is made, it is writing the "5" as 500% and is writing 50 as 5000%.
If there is already a percent in the cell it calls up IE: 50%, it shows up in TextBox3 as .5%
Is it possible to format a textbox on a userform so that it displays as time?
View 1 Replies View RelatedI have a log that I am trying to make compatible for international users. They enter bike rides via a form. When the user hits submit Excel finds the date and then posts the ride info.
The problem is that if I format the date textbox (textbox1) as international the date inputted in textbox1 isn't being found in the column.
Here are the snippets of code from the form (other parts of the code were excluded because they shouldn't effect this issue.
Code when the form initializes ...
Is it possible to selectively format text in a textbox on a userform ie. to make some of the text bold, other parts underlined and other parts italic etc. The text which appears in my text box is entered automatically by a piece of code which extracts the contents of certain cells and arranges them in the text box as needed. I would now like to be able to display the text box with the text formatted so that its not just all in plain text.
View 4 Replies View Related