Format TextBox Controls The Same
Nov 6, 2006
textbox1 on a userform populates textbox2 on a different userform via a command button.
how can i make sure textbox2 keeps the format from textbox1?
eg: when i enter 0.010 in textbox1 and click a command button to populate textbox2 on the 2nd form it produces a value of .01 instead of 0.010
View 3 Replies
ADVERTISEMENT
Jan 24, 2007
way of setting the values of textbox controls, the way im using below is very repetitive and has to be run through every time a combobox1 is changed. Im also going to have to add a lot more case scenarios in the short future.
Private Function setform()
Dim Xeng As Boolean
For Each ctl In Me.Controls
If TypeOf ctl Is MSForms.TextBox Then
ctl.Enabled = True
ctl.Locked = False
ctl.Value = ""
End If
Next
View 6 Replies
View Related
Oct 26, 2006
i am trying to adapt this code to show userform textbox's instead of cell information
Sub treeview()
Dim i As Integer
Dim nodX As Node
Dim strRel As String
Dim strRship As String
Dim strKey As String
Dim strText As String
Worksheets("sheet1").Activate
Range("a3").Select
For i = 1 To 3
'cell A3
strRel = ActiveCell
'cell B3..................
which i found here, fileTreeview control.
View 7 Replies
View Related
Jun 3, 2009
I am trying to calculate the result of two text boxes in a third textbox on a userform.
Box1 = DirectorHrs = a textbox that the user enters the number of hours
Box2= DirectorRate = a textbox that retrieves the rate from a sheet called "Rates" within the workbook upon initialise of userform.
Box3 = DirectorTotal = Box1*Box2. I want this to update when the user enters or changes Box1.
I have the following code on the change event of Box1
Private Sub DirectorHrs_Change()
DirectorTotal.Value = CStr(Val(DirectorRate.Value) * Val(DirectorHrs.Value))
End Sub
View 4 Replies
View Related
Oct 16, 2006
On a multipage user form, a combobox control allows the user to select a value from a list, which automatically populates textboxes with other fields from the same list. This works perfectly. I tried to set up another combobox that would work in the same manner, but referencing an entirely separate worksheet and returning the appropriate values from that list to its related textboxes. My problem is that both comboxes are automatically populating ALL the textboxes, ie combobox1 returns the correct information in its related textboxes, but also changes the information in the textboxes related to combobox2. Combobox2 does the same in reverse. I can at least see and understand why this is happening - the combobox code for both is telling ALL textboxes with numerical tags to update.
Private Sub cmbPAYERefFirst3Digits_Change()
Dim rFoundSource As Range
Dim strText As String
Dim tBox As Control
If cmbPAYERefFirst3Digits.ListIndex > -1 Then
strText = cmbPAYERefFirst3Digits.Text
Set rFoundSource = Range(cmbPAYERefFirst3Digits.RowSource). Find(What:=strText, _
After:=Range(cmbPAYERefFirst3Digits.RowSource).Cells(1, 1), _
LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=True)
For Each tBox In Me.Controls ...........................
View 3 Replies
View Related
Mar 5, 2008
I have the following code that is not working properly. When the form loads it always shows data from the previous time the form loaded. I searched and found the following code which doesn't seem to be working correctly. I thought by unloading the userform the values of the textboxes would "reset". Not happening.
Private Sub CommandButton1_Click()
Dim cRow
cRow = ActiveCell.Row ' remember the current row
Cells(cRow, Range("Column_Type_Of_Ride").Column).ClearContents
Unload Erase_Ride_Form
Erase_Ride_Form.Hide
End Sub
View 9 Replies
View Related
Mar 24, 2008
I created a userform. Now, I want to make a sum of the textboxes in my userform and pop up a warning signal is the sum isn't 18. I tried it in different manners, but I always get some problems. I entered default values of 0 in my textboxes. When I edit the values by using the userform, the popup message will appear even though the sum of my textboxes is 18. Here is the code for the pop up warning message.
If (Me.txt1.Value + Me.txt2.Value + Me.txt3.Value + Me.txt4.Value + Me.txt5.Value + Me.txt6.Value + Me.txt7.Value _
+ Me.txt8.Value + Me.txt9.Value) <> 18 Then
MsgBox "Vous avez fait une erreur. Le total ne donne pas 18 trous."
Me.txt1.SetFocus
Exit Sub
End If
View 4 Replies
View Related
Sep 12, 2006
I am trying to populate the first 12 columns in the last row of the active sheet from 12 UserForm TextBoxes (TB5 thru TB16). Here is the
With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i - 1).Value = Me.Controls("TB" & i + 4).Value
MsgBox "Cycle " & i
Next i
End With
The MsgBox returns a "Cycle 13" only once. The Row has the first column filled but none of the rest. I am trying to load TB5 thru TB16 into columns A thru L of the last row (the last row was copied down to get the formatting and this code was supposed to over write the copied data and leave the formatting). But only TB5 loads into Column A!
View 6 Replies
View Related
Jun 6, 2008
I have the below code that I am using to find an empty textbox with the name FirstName. All it does is place the cursor in the FirstName text box if the textbox is empty, but doesn't really make it stand out. I was hoping to find a way to color the background of the textbox pink, or have it set up so it would stand out somehow.
View 4 Replies
View Related
Oct 1, 2006
I have a spreadsheet that has a userform attached to it with text fields that enter additional data regarding each record. The userform takes these additional 5 fields and inserts them back into the spreadsheet, the final information to be exported back into Access. ( There are of course other ways to do this, but this is how my supervisor wants it done!)
My problem is that now that I can scroll through the spreadsheet without closing the userform, the userform doesnt show the current row's information as I scroll or change rows on the spreadsheet. It will only show the information that was in the row that it was on before i switched back to spreadsheet.
View 9 Replies
View Related
Sep 3, 2007
how to display the result i made in macro to active worksheet so that i can keep a record of the result made in my random generator,
Sub timer()
TextBox1 = ""
TextBox2 = ""
TextBox3 = ""
TextBox4 = ""
Dim x As String, i As Byte
Randomize
x = Format$(Int(Rnd * 1899) + 1, "0000")
For i = 1 To Len(x)
Me.Controls("TextBox" & i).Value = Mid$(x, i, 1)
Application.Wait Now + TimeValue("00:00:03")
Next
End Sub
Private Sub CommandButton1_Click()
timer
End Sub
Private Sub TextBox1_Change()
End Sub
View 3 Replies
View Related
Jan 6, 2007
I have a combobox (Combobox6) that has a List based on Conditions met in other Comboboxes.
Code to populate Combobox6 is: ....
View 9 Replies
View Related
Mar 31, 2013
How to input more than one range into the combobox on format controls. Im using the combox to change charts. The ranges are
C2:C19
&
C23:C40
View 1 Replies
View Related
Apr 11, 2008
I have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
View 3 Replies
View Related
Jan 16, 2006
How can I set the format of multiple textboxes to numberformat "#,##0.00#,##0.00)"?
View 9 Replies
View Related
Oct 20, 2008
I am creating a userform in vba with textboxes. Input (from user) into the textbox is copied to a worksheet in the workbook.
I one text box users will need to type numbers and in another they will need to type letters.
Can the textbox be formatted so it will only allow a number?
Can the text box be formatted to only allow text?
View 6 Replies
View Related
May 10, 2009
Is there proper syntax to combine these two lines of code into one line?
View 2 Replies
View Related
Nov 27, 2009
On the attached example i have a user form (click Add New Hedge button) and on this form is a textbox for 'Avg. Price'. The value of entered from this box will go into the next available row in column on 'Unsettled Hedges' worksheet.
My problem is sometimes i would to enter the price as a fraction, e.g. 1/2 and other i would like to enter the price as a decimal, e.g. 1.5. At the moment if i enter the price as a decimal figure this will convert it to a fraction in column D of the 'unsettled hedges' worksheet.
What do i need to change in my code to make it enter the price in either format?
View 14 Replies
View Related
Mar 16, 2012
I have a textbox on a form that has a default value of 0.00. When the user enters a number I want it to format it to currency with two decimal places. I've tried form.textbox1.text = formatcurrency(textbox1.text,"0.00") but it won't format it to two decimal places.
View 2 Replies
View Related
Apr 25, 2012
I've got a UserForm with 2 textboxes.
TextBox1 requires the user to enter a %.
I don't want the end user to do anything to TextBox2 (I've got it set to Enabled=False). I would like TextBox2 to populate in $$ format based on a formula : TextBox1 % x Range("Sales_Price")
I can get TextBox2 to populate correctly, but I can't get it to convert to $$ format. Everything I've come across uses the 'Exit' or 'AfterUpdate' event - but I don't think I can use these events since the User won't actually be doing anything to TextBox2.
View 1 Replies
View Related
May 31, 2012
Code:
TextBox7.Value = Val(TextBox5.Value) - Val(TextBox6.Value)
How can i format the TextBox7 value like separated sample below.
1,500,000
View 2 Replies
View Related
Mar 1, 2013
I have a userform that contains textbox's that are linked to excel cells and i was wondering if there is a way to format the textbox to show the values in the number format. As the cells values are constantly changing the following code only works if the number is in the hundred of billions but if the number changed to 10,000 for example the format would not adapt.
Private Sub TextBox1_Change()
Me.TextBox5 = Format$(CStr(ThisWorkbook.Sheets("ISN").Range("H1").Value) * Val(TextBox1.Text), "###,###,###,###")
End Sub
View 3 Replies
View Related
Feb 28, 2008
I am using the following code to insert a $ for my txtbox. how can I add to it so that it will also show commas. For example if I type 35000, I want it to show $35,000.
Private Sub TextBox1_KeyPress(ByVal KeyAscii As MSForms.ReturnInteger)
If TextBox1.Text = "" Then TextBox1.Text = "$"
End Sub
View 9 Replies
View Related
Nov 14, 2008
I have an txtBox in a userForm. I need the value of the userform in a customized format i.e. the user will be able to enter only 5 digit numbers and after the value has been entered the txtBox should dispaly the value with prefix "A".
For example:
1. If user enters values as 56, then txtBox should display as A00056.
2. If user enters values as 12346, then txtBox should display as A12346.
View 9 Replies
View Related
Sep 16, 2006
what the format would be for 3 numbers in a userform textbox. No decimals, no symbals, just the 3 numbers.
View 4 Replies
View Related
Jul 23, 2007
In my Excel VBA user form, there are multiple instances of the MS DTPicker control, which feed multiple text boxes. These in turn are linked to named cells on an worksheet. Note at this stage please that dates will not always be required, hence the text boxes. Only the button on the DTP controls are visible, alongside the related textbox.
My problem is that the values in the cells are in US date format and I need them to be recognised in the UK date format. The dates therein must be formatted as dates (ie not as text), as they are used throughout other worksheets for calculations. In the sample below, DTPickerDateOfIncorporation is the named cell (the control source). I know from Roy's responses to other questions on the DTPicker that he doesn't use it - is there a better alternative?
View 5 Replies
View Related
Sep 21, 2007
I need to be able to format a textbox as curancy. Simple enough, right?
The problem is that this box is loaded from two sources. The first is automatic using the change event, this works well. The second is to enter directly into the textbox, which requires using the exit event, this also works.
The problem comes when I try to use both events. The change event interfers with the direct entry (the format keeps changing the entered value and will not allow the user to finish entering).
Private Sub TextBox1_Change()
TextBox1.Text = Format(TextBox1.Text, "$ #,##0.00")
End Sub
Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
TextBox1.Text = Format(TextBox1.Text, "$ #,##0.00")
End Sub
How can this be changed to work for both aut load and direct load?
View 9 Replies
View Related
Oct 14, 2009
I am making a user form in Excel 2007 and for some reason where I am using textboxes for a user to enter numeric values the output on the spreadsheet has a general format which is causing an IF function to return an incorrect value. Is there a way to make sure the output from the form is in "numeric" format?
View 10 Replies
View Related
Apr 30, 2008
I'd like to import some dates into some textboxes on a userform.
I'm also going to let the user edit these, however... what i'd like is for the user to be forced to:
1) enter a date in the format dd/mm/yy
2) Enter a valid date (eg, not feb 30th)
View 9 Replies
View Related
Apr 3, 2012
How can I formate the date in a text box on a user form. I want the date to appear as follow: yyyy/mm/dd
View 2 Replies
View Related