On the attached example i have a button on sheet1 which opens a form. On this form i have four pages of a multi-page control and below it i have a spin button. What i want is for when the spin button is pressed to the right then the multi-page moves up to the next page and vice-versa for the left spin button. How do i write this code?
View 2 Replies
I have a user form with multipage.
With the use of the option buttons,the page needs to made visible or invisible.
Example: on Page one, i have placed radio buttons as page2,Page3&page4.
By default only page 1 should be visible and when we select radio button page2, page2 should become visible or else it should be invisible,when we select radio button page3, page3 should become visible or else should remain invisible.
i want a spin button to decrease the value on a cell into negative numbers.
In other works, if cell a1 has a value of 10, i want the down arrow on the spin button to make the 10 decrease down to 0 , then -1,-2,-3 and so on .
I'm using the below code which only clears the data, I'd like to find a way to delete the row and also shift the row up.
[Code] ......
I'm using a form to display records based on a value YSNumber using this
Set tbl = Sheet1.Range("A:A")
Set fnd = tbl.Find(What:=cbo_YSNumber.Value, After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False)
fnd.Activate
Then I display reccord data by populating labels like this:
Label_RequestInstructionID.Caption = ActiveCell.Offset(0, 3)
Label_SchemeTitle.Caption = ActiveCell.Offset(0, 4)
Label_PMO.Caption = ActiveCell.Offset(0, 5)
I'd like to use the spin button to allow the user to cycle up or down the records.
I don't know much about VBA, but I am sort of working my way through. I have inserted a spin button in an excel sheet and assigned it to the following code in a module:
Sub SpinbuttonD4()
Range("D4").Value = Range("D4").Value + 0.01
End Sub
So, now when I click the spin button (either the up arrow or the down arrow), the value in D4 increases by 0.01.
What I actually want to do, however, is for the value in D4 to increase by 0.01 when I click the up arrow, and decrease by 0.01 when I click the down arrow.
can i link a spin button to a toggle button such that when i click my togglebutton On then the Spin Button causes the Value in a cell to increment from 0.1.2.3.4.5 and when i click the toggle button off then value decrements from 5.4.3.2.1.0
View 2 Replies View Relatedhow to linked the "small change" value in a spin button to take the value of another cell?
View 12 Replies View RelatedThe issue I'm having is with the ActiveX Spin Button (in 2007, formerly in the Control toolbox in 2003). I need the Spin Button to call a certain macro whenever it is clicked up or down. I know how to do this with one spin button, the problem is that the workbook I'm creating could potentially have dozens (or even hundreds) of these spin buttons that all need to call the same macro. It doesn't seem feasible to have to create separate Change event functions for each of these.
My company used to use the simpler form controls for this process, but a situation has come up where we need the ability to make the buttons invisible, or at least appear disabled, and that doesn't seem doable with the form controls.
So my question is, is there a way to specify in my workbook that whenever a spin button is clicked, this particular macro is to be called? Or even, whenever an ActiveX object is clicked, call the macro, because the spin buttons will be the only ActiveX objects in the workbook. I've read a bit about how to create global event handlers for worksheets and workbooks, but I can't find anything related to spin buttons specifically.
I need some help using the spinner tool (the 2 way arrows) as a macro. I want it to point to different cells after each press. So, basically:
Click down once, go to cell A5
Click down again, now go to cell A6
Click down again, now go to cell A7
Clicking down again won't do anything, A7 is the end of the road
And the same thing backwards when clicking up.
I use the two commands SpinButton1_SpinDown() and SpinButton1_SpinUp(). I put the Range("A5").Select, etc. as the code. I don't know how to do the incremental part. I need a counter in there...
I have 6 text boxes on 5 different tabs all with their own spin button that will push the number up or down, starting from the default value. How do i lock/restrict the text box entry so, the spin button is the only way of changing the value?
View 2 Replies View RelatedI have an excel sheet with numerous columns/rows of data. I want to be able to adjust multiple active cells simultaneously using either a Button or Spin Button.
Adjusting a single cell is not trivial, but it is adjusting multiple active cells (range of which can/will change) that I have reached my dilemma.
Here is what I'm using to adjust a single active cell with a Spin Button:
[Code] ......
Is using multiple (user chosen) active cells even possible?
Im creating a form with a spin box option - however when i run it in test I always get a black border around the arrows. Its anoying because I want to make the spinbox small and it overtakes the arrows. I looked everywhere in the properties but can't find where to turn it off. I saw the arrorw and background color but nothing about the border.
I attached 2 pictures for reference.
I want to using a spin button to update figures on a range of cells ranging from C3:AI95. Do I need to create one for every cell and link it to each one or is there a way of the spin button appearing when I select any of the cells to update.
Basically I have a range of issues across the rows on the top and the columns (B) are days of the month.
to plug a variable (integer) into a text box / spin button as its default value.
I have a sheet set up for data entry where 1 row = 1 record = 1 page (of data arranged to print on a form supplied by an outside company). This data is then arranged on the second sheet (up to a maximum of 30).
If there are there are 15 records entered on the spreadsheet on a given day I am trying to use:
LastNum = Application.WorksheetFunction.CountA(Range("G7:G37")) + 4
Where LastNum is the number of rows / entrys that have been typed into the first sheet and that will be printed by default.
how to get that variable into the text box / spin button control.
I'm working on a userform in excel 2003 and have hit a bit of a brick wall.
I have a listbox on a userform that shows only unique entries (customers) which are populated off sheet1 (called Names). On the sheet itself, there are customer entries repeated when there is more than one contact stored. I have the listbox working fine to show each customer only once.
My problems comes in here:
On the userform I have a textbox (this textbox in turn will determine specific contact details to be shown in other textboxes for the contact displayed) with a spinbutton that I want to show each contact for a customer (only showing one at a time and change made with spinbutton). I just can't get this to work properly...
I have a couple spin buttons in my worksheet.
What I want each one to do is to scroll through cell links.
For example, cell I4 has a lookup reference of "=LOOKUP(2^20,Sheet3!A:A)". What that does is get data from the very last line on sheet3 column A.
What I want the spin button to do is scroll through the lines in column A.
So if a user decided he/she did not want that data from column A, then all they would have to do is press up or down on the spin button, scrolling through other data that is in column A.
I've got a problem with the used spinbuttons. The code I used (see below)allows the user to choose a column (with the option button(A,B,C,D,E) in which changes would be made and than changes the value of the given cell according to the name of the spinbutton (which specifies the row). This forces me to use about 80 spinbuttons in a single sheet, and the whole workbook comprises of over 30 sheets pumping the whole file to a size of over 3 MB. To reduce the file size I need a code that would link a master spinbutton (one per sheet) to any active cell (the "just clicked one")
Private Sub sel(ByRef Column As String)
For Each obj In Application.ActiveSheet. OLEObjects
If obj.progID = "Forms.SpinButton.1" Then
obj.LinkedCell = Column & (Val(Mid$(obj.Name, 11)) + 3)
End If
Next obj
End Sub
Private Sub OptionButton1_Click()
sel "b"
End Sub
Private Sub OptionButton2_Click()
sel "c"
End Sub
I have a linked text box and spin button on a userform so the user can enter text or use the buttons and I'm having trouble barring non-integer inputs! Here's what I have so far:
Text box = NumberBox
Spin button= NumberSpin
I am having difficulty finding information on coding my spin button on a user form. I searched and haven't found any information. I need to do is code a spin button to increase or decrease by 1 each time it is clicked up or down. I would like it to populate to a text box on my form if that is possible.
View 3 Replies View RelatedThere are 2 buttons on my worksheet below each other. Each button has a size of a range (i.e. "G33:G34", "G36:G37").
This is what I would like to do:
1. Click on the first button
2. Copy A33:F42 and insert them below row 33
3. Move the buttons to the same position (10 rows down) on the sheet
4. Copy the existing buttons and put them in their original space (i.e. "G33:G34", "G36:G37")
5. Do it as many times as I click on the first button
I have this, and I have no idea to the remaining part...
Private Sub CommandButton1_Click()
Range("A33:F42").Select
Selection.Copy
Rows("33:33").Select
Selection.Insert Shift:=xlDown
Application.CutCopyMode = False
Range("B33:B42").Select
End Sub
is ther away of usin 1 button to open any 1 to 46 worksheets
i know i can make a button to open a sheet with the command
sheet2.activate
but this means i would have to have 46 buttons on the fron page and thats to many
I'm trying to execute a macro and it won't put the focus (radio button) to select x pages wide by x pages tall in the Page Setup/Page/Scaling Area. I looked at the macro and can't find a setting in the code but yet the focus won't change. What can I do about this? In other words the radio button stays selected as "adjust to "" % of normal size. Here's the code...
View 2 Replies View RelatedI have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
Let's say I have one column of;
1
2
3
4
5
6
7
8
9
What is the most efficient way to change this into '3-columns & multi-rows' like this?:
1 2 3
4 5 6
7 8 9
The actual list is a lot longer and numbers are not in order.
I have multiple rows within a cell separated by Alt+Enter, and would like to combine them as follows:
Desired Result
First
First
Name
Name
First Name
First Name
I'm creating a spreadsheet to collect survey data and how I have it set up is this:
Question 1 is a simple yes/no/maybe question - it uses an ActiveX spin button that the user presses up/down to increase/decrease the total. It looks like this:
Private Sub Yes_SpinUp()
With Range("C3")
.Value = WorksheetFunction.Min(15000, .Value + 1)
End With
End Sub
Private Sub Yes_SpinDown()
With Range("C3")
.Value = WorksheetFunction.Max(0, .Value - 1)
End With
End Sub
Cell C3 is where I keep track of how many people answered yes
The button is called "yes" under the button properties
So basically, I have one privatesub for spinning the value up and down. It works fine and is easily copy-paste-able for other answers, it just takes up a lot of space. I'm wondering if there's code I can write to handle the up/down in one sub. If not, i'll stick with what I have.
ive seen a spin button used to move hole rows up and down.
what i would like to do is.
I use cells I9-N9-S9-X9
can i use a spin button to move collums?
how do i write the code, say if i select cell S9 and i want to move it to I9 using the spin button how do i go about that?
I want to make a prize wheel (aka Wheel of fortune) I try to follow this code >> wheel of fortune but I stuck at the animation in order to make it look like the real prize wheel. as far as I google, this youtube (Simple Excel Pie Chart turned into AMAZING Electronic Prize Wheel of Fortune! - YouTube) demonstrate the result that I really want my chart would be.
how to make the prize wheel spin very fast at first and slower later until stop?
I have this code ...
View 13 Replies View Related
