i want a spin button to decrease the value on a cell into negative numbers.
In other works, if cell a1 has a value of 10, i want the down arrow on the spin button to make the 10 decrease down to 0 , then -1,-2,-3 and so on .
I'm using the below code which only clears the data, I'd like to find a way to delete the row and also shift the row up.
[Code] ......
I'm using a form to display records based on a value YSNumber using this
Set tbl = Sheet1.Range("A:A")
Set fnd = tbl.Find(What:=cbo_YSNumber.Value, After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False)
fnd.Activate
Then I display reccord data by populating labels like this:
Label_RequestInstructionID.Caption = ActiveCell.Offset(0, 3)
Label_SchemeTitle.Caption = ActiveCell.Offset(0, 4)
Label_PMO.Caption = ActiveCell.Offset(0, 5)
I'd like to use the spin button to allow the user to cycle up or down the records.
I don't know much about VBA, but I am sort of working my way through. I have inserted a spin button in an excel sheet and assigned it to the following code in a module:
Sub SpinbuttonD4()
Range("D4").Value = Range("D4").Value + 0.01
End Sub
So, now when I click the spin button (either the up arrow or the down arrow), the value in D4 increases by 0.01.
What I actually want to do, however, is for the value in D4 to increase by 0.01 when I click the up arrow, and decrease by 0.01 when I click the down arrow.
can i link a spin button to a toggle button such that when i click my togglebutton On then the Spin Button causes the Value in a cell to increment from 0.1.2.3.4.5 and when i click the toggle button off then value decrements from 5.4.3.2.1.0
View 2 Replies View Relatedhow to linked the "small change" value in a spin button to take the value of another cell?
View 12 Replies View RelatedThe issue I'm having is with the ActiveX Spin Button (in 2007, formerly in the Control toolbox in 2003). I need the Spin Button to call a certain macro whenever it is clicked up or down. I know how to do this with one spin button, the problem is that the workbook I'm creating could potentially have dozens (or even hundreds) of these spin buttons that all need to call the same macro. It doesn't seem feasible to have to create separate Change event functions for each of these.
My company used to use the simpler form controls for this process, but a situation has come up where we need the ability to make the buttons invisible, or at least appear disabled, and that doesn't seem doable with the form controls.
So my question is, is there a way to specify in my workbook that whenever a spin button is clicked, this particular macro is to be called? Or even, whenever an ActiveX object is clicked, call the macro, because the spin buttons will be the only ActiveX objects in the workbook. I've read a bit about how to create global event handlers for worksheets and workbooks, but I can't find anything related to spin buttons specifically.
I need some help using the spinner tool (the 2 way arrows) as a macro. I want it to point to different cells after each press. So, basically:
Click down once, go to cell A5
Click down again, now go to cell A6
Click down again, now go to cell A7
Clicking down again won't do anything, A7 is the end of the road
And the same thing backwards when clicking up.
I use the two commands SpinButton1_SpinDown() and SpinButton1_SpinUp(). I put the Range("A5").Select, etc. as the code. I don't know how to do the incremental part. I need a counter in there...
I have 6 text boxes on 5 different tabs all with their own spin button that will push the number up or down, starting from the default value. How do i lock/restrict the text box entry so, the spin button is the only way of changing the value?
View 2 Replies View RelatedI have an excel sheet with numerous columns/rows of data. I want to be able to adjust multiple active cells simultaneously using either a Button or Spin Button.
Adjusting a single cell is not trivial, but it is adjusting multiple active cells (range of which can/will change) that I have reached my dilemma.
Here is what I'm using to adjust a single active cell with a Spin Button:
[Code] ......
Is using multiple (user chosen) active cells even possible?
Im creating a form with a spin box option - however when i run it in test I always get a black border around the arrows. Its anoying because I want to make the spinbox small and it overtakes the arrows. I looked everywhere in the properties but can't find where to turn it off. I saw the arrorw and background color but nothing about the border.
I attached 2 pictures for reference.
On the attached example i have a button on sheet1 which opens a form. On this form i have four pages of a multi-page control and below it i have a spin button. What i want is for when the spin button is pressed to the right then the multi-page moves up to the next page and vice-versa for the left spin button. How do i write this code?
View 2 Replies View RelatedI want to using a spin button to update figures on a range of cells ranging from C3:AI95. Do I need to create one for every cell and link it to each one or is there a way of the spin button appearing when I select any of the cells to update.
Basically I have a range of issues across the rows on the top and the columns (B) are days of the month.
to plug a variable (integer) into a text box / spin button as its default value.
I have a sheet set up for data entry where 1 row = 1 record = 1 page (of data arranged to print on a form supplied by an outside company). This data is then arranged on the second sheet (up to a maximum of 30).
If there are there are 15 records entered on the spreadsheet on a given day I am trying to use:
LastNum = Application.WorksheetFunction.CountA(Range("G7:G37")) + 4
Where LastNum is the number of rows / entrys that have been typed into the first sheet and that will be printed by default.
how to get that variable into the text box / spin button control.
I'm working on a userform in excel 2003 and have hit a bit of a brick wall.
I have a listbox on a userform that shows only unique entries (customers) which are populated off sheet1 (called Names). On the sheet itself, there are customer entries repeated when there is more than one contact stored. I have the listbox working fine to show each customer only once.
My problems comes in here:
On the userform I have a textbox (this textbox in turn will determine specific contact details to be shown in other textboxes for the contact displayed) with a spinbutton that I want to show each contact for a customer (only showing one at a time and change made with spinbutton). I just can't get this to work properly...
I have a couple spin buttons in my worksheet.
What I want each one to do is to scroll through cell links.
For example, cell I4 has a lookup reference of "=LOOKUP(2^20,Sheet3!A:A)". What that does is get data from the very last line on sheet3 column A.
What I want the spin button to do is scroll through the lines in column A.
So if a user decided he/she did not want that data from column A, then all they would have to do is press up or down on the spin button, scrolling through other data that is in column A.
I've got a problem with the used spinbuttons. The code I used (see below)allows the user to choose a column (with the option button(A,B,C,D,E) in which changes would be made and than changes the value of the given cell according to the name of the spinbutton (which specifies the row). This forces me to use about 80 spinbuttons in a single sheet, and the whole workbook comprises of over 30 sheets pumping the whole file to a size of over 3 MB. To reduce the file size I need a code that would link a master spinbutton (one per sheet) to any active cell (the "just clicked one")
Private Sub sel(ByRef Column As String)
For Each obj In Application.ActiveSheet. OLEObjects
If obj.progID = "Forms.SpinButton.1" Then
obj.LinkedCell = Column & (Val(Mid$(obj.Name, 11)) + 3)
End If
Next obj
End Sub
Private Sub OptionButton1_Click()
sel "b"
End Sub
Private Sub OptionButton2_Click()
sel "c"
End Sub
I have a linked text box and spin button on a userform so the user can enter text or use the buttons and I'm having trouble barring non-integer inputs! Here's what I have so far:
Text box = NumberBox
Spin button= NumberSpin
I am having difficulty finding information on coding my spin button on a user form. I searched and haven't found any information. I need to do is code a spin button to increase or decrease by 1 each time it is clicked up or down. I would like it to populate to a text box on my form if that is possible.
View 3 Replies View RelatedI'm creating a spreadsheet to collect survey data and how I have it set up is this:
Question 1 is a simple yes/no/maybe question - it uses an ActiveX spin button that the user presses up/down to increase/decrease the total. It looks like this:
Private Sub Yes_SpinUp()
With Range("C3")
.Value = WorksheetFunction.Min(15000, .Value + 1)
End With
End Sub
Private Sub Yes_SpinDown()
With Range("C3")
.Value = WorksheetFunction.Max(0, .Value - 1)
End With
End Sub
Cell C3 is where I keep track of how many people answered yes
The button is called "yes" under the button properties
So basically, I have one privatesub for spinning the value up and down. It works fine and is easily copy-paste-able for other answers, it just takes up a lot of space. I'm wondering if there's code I can write to handle the up/down in one sub. If not, i'll stick with what I have.
ive seen a spin button used to move hole rows up and down.
what i would like to do is.
I use cells I9-N9-S9-X9
can i use a spin button to move collums?
how do i write the code, say if i select cell S9 and i want to move it to I9 using the spin button how do i go about that?
I want to make a prize wheel (aka Wheel of fortune) I try to follow this code >> wheel of fortune but I stuck at the animation in order to make it look like the real prize wheel. as far as I google, this youtube (Simple Excel Pie Chart turned into AMAZING Electronic Prize Wheel of Fortune! - YouTube) demonstrate the result that I really want my chart would be.
how to make the prize wheel spin very fast at first and slower later until stop?
I have a togglebutton for an excel sheet in use for scoring psychological tests. When pressed, the button higlights the cells where a raw score is inserted.
What I need is a code to higlight the togglebutton when pressed, eg. green (colorindex 4). The button is white. How to do this?
Below is the code, It has more lines than needed, but it works.
Private Sub ToggleButton1_Click()
'FKV TOGGLE'
ActiveSheet.Unprotect "manisk"
If ToggleButton1 Then
[Code] ........
I received this code from an example I found once upon a time that was originally submitted by someone else. Right now the code enters the current date in a cell of the same row as the checkbox when it's checked. I need to revise it, or come up with something similar, that will reference the value of a cell when it is in the same row as the button (from the Forms toolbar) that is clicked to activate the macro. First of all, I don't know how to reference a Forms button in VBA.
Sub Process_CheckBox()
Dim cBox As CheckBox
Dim LRow As Integer
Dim LRange As String
LName = Application.Caller
Set cBox = ActiveSheet.CheckBoxes(LName)
' Find row that checkbox resides in
LRow = cBox.TopLeftCell.Row
LRange = "B" & CStr(LRow)
'Change date in column B, if checkbox is checked
If cBox.Value > 0 Then
ActiveSheet.Range(LRange).Value = Date
'Clear date in column B, if checkbox is unchecked
Else
ActiveSheet.Range(LRange).Value = Null
End If
End Sub
Here is some other code I already created. Unfortunately, because I don't know how to do the row reference, I had to create 25 different macros, which just bulks up the size of my file and slows it down. But here is what I'm trying to accomplish in my macro:.............
I currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies View RelatedContext: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
[Code] .....
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit
Context: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
VB:
[COLOR=#333333]Dim Btn As Button[/COLOR]
[COLOR=#333333]Dim rng As Range[/COLOR]
[COLOR=#333333]For I = 2 To RowCount + 1[/COLOR]
[COLOR=#333333]With Worksheets("Sheet1")[/COLOR]
[COLOR=#333333]Set rng = .Range("B" & I)[/COLOR]
[COLOR=#333333]Set Btn = .Buttons.Add(rng.Left, rng.Top, rng.Width, rng.Height)[/COLOR]
[Code]....
The following code is my Zip macro:
VB:
[COLOR=#333333]Sub Zip()[/COLOR]
[COLOR=#333333]Dim strDate As String, SavePath As String, sFName As String[/COLOR]
[COLOR=#333333]Dim oApp As Object, iCtr As Long, I As Integer[/COLOR]
[COLOR=#333333]Dim vArr, FileNameZip[/COLOR]
[COLOR=#333333]Dim FName() As Variant[/COLOR]
[Code]...
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
I am imagining a spreadsheet with the equivalent of an info button in each cell of column A. The idea is the user clicks the button to open a User Form containing additional info about the entitity represented by values on that row.
E.g., Row 1 is labels, row 2 is all about Bob, 3 is about Jane, 4 is about Freddy. If the user clicks the info button on row 3 then a user form opens up and displays additonal info about Jane.
I am wondering if there is a way for VB to identify which row the clicked button was on without having to write individual code for each button telling VB which row the button was on.
I am hoping there is some form button property I can reference or interrogate which will give me a cell address; a button.position property or similar. This will obviously save me a lot of coding if VB can dynamically determine which row is being interrogated as there will be a couple of hundred of these to start with, potentially thousands. (I realise Access is a better solution for database interrogation, but I have to work with excel at present).
Ultimately, the user form that the button calls up will have a list box on it and I want the list box to default to the entity on that row, and allow the user to browse the other entities if they want to.
If there isn't a solution for this I will just have a single info button for the users to click that opens the user form and then they can select the entity from a list box. But I would like to offer the "intelligent display" option but don't relish coding the equivalent of several hundred "You clicked button four hundred and seventy six, default to info card for bert".