can i link a spin button to a toggle button such that when i click my togglebutton On then the Spin Button causes the Value in a cell to increment from 0.1.2.3.4.5 and when i click the toggle button off then value decrements from 5.4.3.2.1.0
View 2 Replies
i want a spin button to decrease the value on a cell into negative numbers.
In other works, if cell a1 has a value of 10, i want the down arrow on the spin button to make the 10 decrease down to 0 , then -1,-2,-3 and so on .
I'm using the below code which only clears the data, I'd like to find a way to delete the row and also shift the row up.
[Code] ......
I'm using a form to display records based on a value YSNumber using this
Set tbl = Sheet1.Range("A:A")
Set fnd = tbl.Find(What:=cbo_YSNumber.Value, After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False)
fnd.Activate
Then I display reccord data by populating labels like this:
Label_RequestInstructionID.Caption = ActiveCell.Offset(0, 3)
Label_SchemeTitle.Caption = ActiveCell.Offset(0, 4)
Label_PMO.Caption = ActiveCell.Offset(0, 5)
I'd like to use the spin button to allow the user to cycle up or down the records.
I don't know much about VBA, but I am sort of working my way through. I have inserted a spin button in an excel sheet and assigned it to the following code in a module:
Sub SpinbuttonD4()
Range("D4").Value = Range("D4").Value + 0.01
End Sub
So, now when I click the spin button (either the up arrow or the down arrow), the value in D4 increases by 0.01.
What I actually want to do, however, is for the value in D4 to increase by 0.01 when I click the up arrow, and decrease by 0.01 when I click the down arrow.
how to linked the "small change" value in a spin button to take the value of another cell?
View 12 Replies View RelatedThe issue I'm having is with the ActiveX Spin Button (in 2007, formerly in the Control toolbox in 2003). I need the Spin Button to call a certain macro whenever it is clicked up or down. I know how to do this with one spin button, the problem is that the workbook I'm creating could potentially have dozens (or even hundreds) of these spin buttons that all need to call the same macro. It doesn't seem feasible to have to create separate Change event functions for each of these.
My company used to use the simpler form controls for this process, but a situation has come up where we need the ability to make the buttons invisible, or at least appear disabled, and that doesn't seem doable with the form controls.
So my question is, is there a way to specify in my workbook that whenever a spin button is clicked, this particular macro is to be called? Or even, whenever an ActiveX object is clicked, call the macro, because the spin buttons will be the only ActiveX objects in the workbook. I've read a bit about how to create global event handlers for worksheets and workbooks, but I can't find anything related to spin buttons specifically.
I need some help using the spinner tool (the 2 way arrows) as a macro. I want it to point to different cells after each press. So, basically:
Click down once, go to cell A5
Click down again, now go to cell A6
Click down again, now go to cell A7
Clicking down again won't do anything, A7 is the end of the road
And the same thing backwards when clicking up.
I use the two commands SpinButton1_SpinDown() and SpinButton1_SpinUp(). I put the Range("A5").Select, etc. as the code. I don't know how to do the incremental part. I need a counter in there...
I have 6 text boxes on 5 different tabs all with their own spin button that will push the number up or down, starting from the default value. How do i lock/restrict the text box entry so, the spin button is the only way of changing the value?
View 2 Replies View RelatedI have an excel sheet with numerous columns/rows of data. I want to be able to adjust multiple active cells simultaneously using either a Button or Spin Button.
Adjusting a single cell is not trivial, but it is adjusting multiple active cells (range of which can/will change) that I have reached my dilemma.
Here is what I'm using to adjust a single active cell with a Spin Button:
[Code] ......
Is using multiple (user chosen) active cells even possible?
Im creating a form with a spin box option - however when i run it in test I always get a black border around the arrows. Its anoying because I want to make the spinbox small and it overtakes the arrows. I looked everywhere in the properties but can't find where to turn it off. I saw the arrorw and background color but nothing about the border.
I attached 2 pictures for reference.
On the attached example i have a button on sheet1 which opens a form. On this form i have four pages of a multi-page control and below it i have a spin button. What i want is for when the spin button is pressed to the right then the multi-page moves up to the next page and vice-versa for the left spin button. How do i write this code?
View 2 Replies View RelatedI want to using a spin button to update figures on a range of cells ranging from C3:AI95. Do I need to create one for every cell and link it to each one or is there a way of the spin button appearing when I select any of the cells to update.
Basically I have a range of issues across the rows on the top and the columns (B) are days of the month.
to plug a variable (integer) into a text box / spin button as its default value.
I have a sheet set up for data entry where 1 row = 1 record = 1 page (of data arranged to print on a form supplied by an outside company). This data is then arranged on the second sheet (up to a maximum of 30).
If there are there are 15 records entered on the spreadsheet on a given day I am trying to use:
LastNum = Application.WorksheetFunction.CountA(Range("G7:G37")) + 4
Where LastNum is the number of rows / entrys that have been typed into the first sheet and that will be printed by default.
how to get that variable into the text box / spin button control.
I'm working on a userform in excel 2003 and have hit a bit of a brick wall.
I have a listbox on a userform that shows only unique entries (customers) which are populated off sheet1 (called Names). On the sheet itself, there are customer entries repeated when there is more than one contact stored. I have the listbox working fine to show each customer only once.
My problems comes in here:
On the userform I have a textbox (this textbox in turn will determine specific contact details to be shown in other textboxes for the contact displayed) with a spinbutton that I want to show each contact for a customer (only showing one at a time and change made with spinbutton). I just can't get this to work properly...
I have a couple spin buttons in my worksheet.
What I want each one to do is to scroll through cell links.
For example, cell I4 has a lookup reference of "=LOOKUP(2^20,Sheet3!A:A)". What that does is get data from the very last line on sheet3 column A.
What I want the spin button to do is scroll through the lines in column A.
So if a user decided he/she did not want that data from column A, then all they would have to do is press up or down on the spin button, scrolling through other data that is in column A.
I've got a problem with the used spinbuttons. The code I used (see below)allows the user to choose a column (with the option button(A,B,C,D,E) in which changes would be made and than changes the value of the given cell according to the name of the spinbutton (which specifies the row). This forces me to use about 80 spinbuttons in a single sheet, and the whole workbook comprises of over 30 sheets pumping the whole file to a size of over 3 MB. To reduce the file size I need a code that would link a master spinbutton (one per sheet) to any active cell (the "just clicked one")
Private Sub sel(ByRef Column As String)
For Each obj In Application.ActiveSheet. OLEObjects
If obj.progID = "Forms.SpinButton.1" Then
obj.LinkedCell = Column & (Val(Mid$(obj.Name, 11)) + 3)
End If
Next obj
End Sub
Private Sub OptionButton1_Click()
sel "b"
End Sub
Private Sub OptionButton2_Click()
sel "c"
End Sub
I have a linked text box and spin button on a userform so the user can enter text or use the buttons and I'm having trouble barring non-integer inputs! Here's what I have so far:
Text box = NumberBox
Spin button= NumberSpin
I am having difficulty finding information on coding my spin button on a user form. I searched and haven't found any information. I need to do is code a spin button to increase or decrease by 1 each time it is clicked up or down. I would like it to populate to a text box on my form if that is possible.
View 3 Replies View RelatedIf I enter 1 in a cell, 1.1 below, select both and drag down, I should get a vector: 1, 1.1, 1.2 etc.
However, in the most recent instance of seeing this problem, at 6.5 I get 6.50000000000001! 6.6 onwards is then correct, at 7.2 the value is again incorrect in the 14th decimal place, and the errors continue intermittently through the sequence.
Is there a fix for this? It's extremely time consuming to have to check each auto-incremented array like this.
There is likely an easy fix for this, but I have an auto increment with the following code and would like the letter R to precede the auto increment number everytime.
My current code is this:
Private Sub Workbook_Open()
Sheets("Receipt").Range("F11").Value = Sheets("Receipt").Range("F11").Value + 1
End Sub
I have a following the following dataset:
ID YearWk Sales
1 201310 $1000
1 201311 $1200
1 201312 $1300
1 201313 $1400
2 201310 $2000
2 201311 $2200
2 201312 $2300
2 201313 $2400
I'm trying to figure out how to create a new variable that will increment and reset based on ID.. similar to the FIRST. function in SAS.
Final Dataset:
ID YearWk Sales Count
1 201310 $1000 1
1 201311 $1200 2
1 201312 $1300 3
1 201313 $1400 4
2 201310 $2000 1
2 201311 $2200 2
2 201312 $2300 3
2 201313 $2400 4
I have got the following problem. I have got a table which looks like this:
=Time!A1
=Open!A1
=max!A1
=min!A1
=Close!A1
When I mark the selected cells and scroll down using the autofill option I get this:
=Time!A1
=Open!A1
=max!A1
=min!A1
=Close!A1
=Time!A6
=Open!A6
=max!A6
=min!A6
=Close!A6
Why does it give A6? I want A2 instead of A6 because I want to create a table from A1 to A500 but without these jumps from A1 to A6.
i have excel sheet with name labels.i want count how many times user repated along with his branch code. acctully am done this using this formula, but not getting what am exepected.
Formula in B1 is ="JSK-SW-1"&(countif($A$2:$A2,$A2))
output is value is incremented, but i want text also be change.
A B
Name Count
Sateesh JSK-SW-1
Rajesh Raj- SE-1
Sateesh JSK-SW-2
Rajesh Raj-SE-2
Anil JAK-DE-1
I am trying to get my invoice sheet to automatically increment the invoice number when I open the workbook. I know it is in the code i.e. private sub? but it doesnt seem to work.
View 3 Replies View RelatedI have created a simple UserForm to enter new customer details to the Customer List in the spreadsheet, form works fine except for one little thing, which is New Customer ID, which works, but only with numeric values like 1, 2, 3 and so on.
Basically what I need this for to do is once form is opened/called new customer ID need to be created, which could be and Alfa numerical set of characters like AA-01234, AA-01235, AA-01236 and so on.
Also, is there a way of posting newly added Customer ID in the MsgBox along with MsgBox "One record added to Customers List. New Customer ID is "
All of my attempts to create this are failing and causing errors.Here is my code, Customer ID is TextBox1.
[Code]....
I have made a custom list in Excel 2010 so it auto-increments the alphabet using the auto increment pull down/copy square on the bottom right of a cell in Excel. My question is I have some data in a sheet such as this
600
600
600
600
601
601
601
601
602
602
602
What I want to do is add a letter of the alphabet to the end of these numbers and have the alphabet auto increment based on the data above like this:
600
600A
600B
600C
601
601A
601B
601C
602
602A
602B
I thought it would be simple since I now have a custom list but every formula I try fails.
In my excel workbook, I have a customer table and invoice sheet among many others.
As part of my system, there is functionality to grant new customers with a discount on the first purchase. Within my customer table, the last two columns are "Number of Purchases" and "Customer Type" (either single/multiple depending on no. of purchases), which are then used to determine whether the discount is valid or not on the invoice.
Once an invoice has been created, archived and refreshed with the customer selected (via a Customer ID), I would like some code to auto increment the number of purchases on the Customer table for that specific customer to +1.
For example, customer called Bob (Bob-1);
Number of purchases = 1
Customer Type = Single
Discount = Yes
Invoice then created for Bob (using Bob-1 as the unique value), sent off and refreshed. New figures should be:
Number of purchases = 2
Customer Type = Multiple (can be achieved by using IF statement on No. of purchases)
Discount = No
Auto Filter Using Macro
I have a Spreadsheet with names and other data, my question is, can i somehow Auto Filter the First name with a macro that I can assign to a button, what I would like to do is type the First Name in A1 and in B1 have a button that I can press and it will filter all with the name and other data on the same row I have typed in A1 will only be shown.
I'm trying to find a way of hiding every sixth row on my sheet, however, no matter what i try I can't seem to get it to work.
I want to be able to click a macro button that will auto hide every sixth row. But I don't want to have to input every row reference in VB.
