I am having difficulty finding information on coding my spin button on a user form. I searched and haven't found any information. I need to do is code a spin button to increase or decrease by 1 each time it is clicked up or down. I would like it to populate to a text box on my form if that is possible.
View 3 RepliesI have a simple spreadsheet. A value is inserted in cell B4.
I want to increase that value or decrease it by adding a button in the next cells, C4 or D4, to increase and decrease that value instead of manually typing in the new value.
I'm building a keypad out of commandbutton controls, and there's this strange resizing behavior with the commandbuttons. I've attached an example, as it's much easier to see than describe.... but essentially, clicking a button seems to enlargen it slightly, and then two clicks later, it 'dezooms' back to original size (even with shadows turned off). while this is not hugely noticeable individually, it feels really strange when there's a whole keypad of commandbuttons.
View 8 Replies View RelatedCurrently I have 5 identical command buttons which do something similar but in a different cell.
What i want to do is sum up the 5 different task using a single command button.
When cmdaddsp1 is clicked the first time cell "B4" is populated with a value from a table.
When cmdaddsp1 is clicked a second time cell "B5" is to be populated with a value from a table.
When cmdaddsp1 is clicked a third time cell "B6" is to be populated from the table,
and so forth.
Is there a loop or anything that can be used for this? I only want other cells to be populated when the command button is pressed.
I'm dealing with the following problem. Say I have a set af values:
A B
1 567
2 546
3 567
4 554
5 572
6 543
I can easily determine the average of the values in column B (=AVERAGE(B1:B6)) But I also want to know if the average is increasing or decreasing without making a chart and trendline. Concrete: I want the cell with average (say B7) to turn green when the trendline has a positive growth and red when negative.
Simplified:
I have a this years total in A1, last years total in B1, difference +/- in C1
$1000.00___$800.00___+$200.00___+%
$800.00___$1000.00___<$200.00>___<%>
I am trying to get a % of Increase/Decrease (Between A1 and B1) in D1.
Not as a dollar amount but as a %.
I have tried Percentile and PercentRank and some other stuff. No joy.
I have a single simple question, so let's get straight to the point: I have an A column with these values:
I:::I::::::A::::::I::::::B:::::....
I==================== ....
I 1 I____40____I_________ ....
I 2 I____50____I_________.....
I 3 I____30____I_________.....
And I need each of these values increased/decreased by a constant number.
So far, I only found formulas where all cells are, say, added into a single result, as you can see here:.....
I need to be able to select a certain number (from, say, 1-20) from a drop down menu, which will decide a number of rows (filled with data) on the next sheet. As I prefer not to give anyone the sheet I'm actually working on I made a quick look-a-like which might explain this better.
A and B are different scenarios, with different values in the fake drop-down menu I made. Just to pass on the understanding of what I want the values to do. If putting a drop-down menu there is troublesome, then I can live without them. But entering a certain value in the field and getting that number of rows for a certain product is what I need. I tried searching for a function/macro to use for this, but I dont know what exactly to look for. Name, etc
I need a formula that can work out a percentage increase or decrease from cell J2 to L2.
J2 is the current data with L2 being the previous data - so the formula would compare J2 with L2 and tell me if there is an increase or decrease shown as a percentage.
The figures fluctuate from month to month so they could be either an increase or decrease. There are over 300 entries so I can't go through each one adjusting the formula accordingly - this is why I need the formula to do the working out if it is up or down.
Below i have example table in which Cells B2:G4 have draw numbers. In Cells I2:X4 I have numbers in 3 groups, Group start with small number and finish with highest number.
For example in row 2 first groups is 5 to 36, second group is 10 to 30 and third group is 4 to 41 and continue same for rest rows ....
How can i format my excel spreadsheet cell so that a number
10,000,000
displays as
10
in speeding up the below code as it does not seem to matter whether I use For, If loop etc - it runs too slowly. Basically we have one sheet which is input in a different timezone that needs converting to GMT... since daylight saving I wrote some code to cover the +/- 1 hour difference (this seems to work quite well) yet when it comes to converting the actual cells it runs incredibly slowly. I appreciate any help but its only the code after "Sheets("data").Unprotect" that i think needs changing. The time stamp is in column 7 - I hope this makes enough sense - which then gets converted by either 4.5 or 5.5 hours dependent on british summer time.
Sub TimeConvert()
With Application
.Calculation = xlCalculationAutomatic
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
Dim FirstDate As Date
Dim Position, DayIndex, lgrow, lstrow As Long, TargetMonth As Long, Stweekday, Enweekday, Tdate As Date, TargetYear As Long, cell As Range
Dim bst As Boolean
TargetYear = Year(Now)
TargetMonth = 3
Position = "L"
DayIndex = 1
I have totals in d18 and e18 and need to find the percentage increase or decrease between the 2. E18 is last year's value and D18 is this year's value. Which formula will give me what I am looking for:
(D18-E18)/D18 or (D18-E18)/E18
I have a macro that increase a cell number and one that decreases a cell number, heres my code:
Code:
Sub Macro1()
Dim t
t = Split(Worksheets("Sheet1").Range("d5").Text, "/")
t(0) = Format(t(0) + 1, "0")
Worksheets("Sheet1").Range("d5") = Join(t, "/")
[Code] .......
So they do exactly what i want them to do but i want to put a limitation on them, so say the number in the cell is 0 then i dont want it to be able to subtract from it anymore, and say the number is 20 i dont want it to be able to add any more, i tried to put if statments into the code but no luck.
How to increase & decrease numbers evenly for a spreadsheet.
I have a number in cell F16 that can be changed and for this example say it has a value of 900.
I have a number in cell F17 that is always more than cell F16, for this example lets say it is 1000.
What I'm trying to do is create 10 numbers evenly increasing away from 900 (F16) in value, & 10 numbers evenly decreasing in value away from 900 (Cell F16) but here's the catch.
What makes this tricky is that the numbers that are increasing in value away from 900 (F16) can't be bigger than the value of F17 , IE in this example the number 1000
So the formulas must evenly distribute 10 numbers BETWEEN 900 & 1000. This must have the same even distribution for the increasing numbers & decreasing numbers.
I'll attach a sheet also. So, if you say 900 is a starting point & 1000 is the ending point, what formulas would you need in each cell to evenly increase to 1000?
Also,, going the other way, decreasing, away from 900 at the same rate as the increase?
Really stuck n this 1.
Spreadsheet here: [URL] ......
Screenshot here: [URL] ......
I'll attach a spreadsheet .xls
I have a 49 numbers in cell A1:AW1 they are not in acceding order. I want to separate all groups start from lowest number to highest giving them deferent color. As shown in example table below in cell (A2 start with nš 6 and increase up to nš 47 till cell F2 =yellow color) then Cell (G3 decrease nš 3 and increase up to nš 49 till cell L49=Green Color) and continue same process for rest ....
View 9 Replies View RelatedIs there any keyboard shortcut to increase or decrease the number of decimals shown directly (I mean without having to use ctrl + 1... etc )
View 7 Replies View Relatedhow to change the cell colour due to a sum increase or decrease? For example: if the amount is greater than 200, change cell colour to green. If under 200 change cell colour to yellow.
View 2 Replies View Relatedi want a spin button to decrease the value on a cell into negative numbers.
In other works, if cell a1 has a value of 10, i want the down arrow on the spin button to make the 10 decrease down to 0 , then -1,-2,-3 and so on .
I'm using the below code which only clears the data, I'd like to find a way to delete the row and also shift the row up.
[Code] ......
I'm using a form to display records based on a value YSNumber using this
Set tbl = Sheet1.Range("A:A")
Set fnd = tbl.Find(What:=cbo_YSNumber.Value, After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False)
fnd.Activate
Then I display reccord data by populating labels like this:
Label_RequestInstructionID.Caption = ActiveCell.Offset(0, 3)
Label_SchemeTitle.Caption = ActiveCell.Offset(0, 4)
Label_PMO.Caption = ActiveCell.Offset(0, 5)
I'd like to use the spin button to allow the user to cycle up or down the records.
I don't know much about VBA, but I am sort of working my way through. I have inserted a spin button in an excel sheet and assigned it to the following code in a module:
Sub SpinbuttonD4()
Range("D4").Value = Range("D4").Value + 0.01
End Sub
So, now when I click the spin button (either the up arrow or the down arrow), the value in D4 increases by 0.01.
What I actually want to do, however, is for the value in D4 to increase by 0.01 when I click the up arrow, and decrease by 0.01 when I click the down arrow.
can i link a spin button to a toggle button such that when i click my togglebutton On then the Spin Button causes the Value in a cell to increment from 0.1.2.3.4.5 and when i click the toggle button off then value decrements from 5.4.3.2.1.0
View 2 Replies View Relatedhow to linked the "small change" value in a spin button to take the value of another cell?
View 12 Replies View RelatedThe issue I'm having is with the ActiveX Spin Button (in 2007, formerly in the Control toolbox in 2003). I need the Spin Button to call a certain macro whenever it is clicked up or down. I know how to do this with one spin button, the problem is that the workbook I'm creating could potentially have dozens (or even hundreds) of these spin buttons that all need to call the same macro. It doesn't seem feasible to have to create separate Change event functions for each of these.
My company used to use the simpler form controls for this process, but a situation has come up where we need the ability to make the buttons invisible, or at least appear disabled, and that doesn't seem doable with the form controls.
So my question is, is there a way to specify in my workbook that whenever a spin button is clicked, this particular macro is to be called? Or even, whenever an ActiveX object is clicked, call the macro, because the spin buttons will be the only ActiveX objects in the workbook. I've read a bit about how to create global event handlers for worksheets and workbooks, but I can't find anything related to spin buttons specifically.
I need some help using the spinner tool (the 2 way arrows) as a macro. I want it to point to different cells after each press. So, basically:
Click down once, go to cell A5
Click down again, now go to cell A6
Click down again, now go to cell A7
Clicking down again won't do anything, A7 is the end of the road
And the same thing backwards when clicking up.
I use the two commands SpinButton1_SpinDown() and SpinButton1_SpinUp(). I put the Range("A5").Select, etc. as the code. I don't know how to do the incremental part. I need a counter in there...
I have 6 text boxes on 5 different tabs all with their own spin button that will push the number up or down, starting from the default value. How do i lock/restrict the text box entry so, the spin button is the only way of changing the value?
View 2 Replies View RelatedI have an excel sheet with numerous columns/rows of data. I want to be able to adjust multiple active cells simultaneously using either a Button or Spin Button.
Adjusting a single cell is not trivial, but it is adjusting multiple active cells (range of which can/will change) that I have reached my dilemma.
Here is what I'm using to adjust a single active cell with a Spin Button:
[Code] ......
Is using multiple (user chosen) active cells even possible?
Im creating a form with a spin box option - however when i run it in test I always get a black border around the arrows. Its anoying because I want to make the spinbox small and it overtakes the arrows. I looked everywhere in the properties but can't find where to turn it off. I saw the arrorw and background color but nothing about the border.
I attached 2 pictures for reference.
On the attached example i have a button on sheet1 which opens a form. On this form i have four pages of a multi-page control and below it i have a spin button. What i want is for when the spin button is pressed to the right then the multi-page moves up to the next page and vice-versa for the left spin button. How do i write this code?
View 2 Replies View Related