I have a monthly report showing actuals and budget for current month (or quarter) and year to date. Range names have been created for (1) each month, (2) each quarter and (3) year to date). I'm using the SUMPRODUCT function to extract information by account. For example:
=SUMPRODUCT(($A9=ACT_Account)*(ACT_Jan))
This formula works except I have to replace the "ACT_Jan" each month accordingly. Can a data validation list be created with the range names so that updating this formula monthly can be simplified? For example, changing "ACT_Jan" to "ACT_Feb" with a drop down list.
I've written a procedure that loads a list of country selections in a dropdown (see attached/vb editor/ThisWorkbook).
The problem is the valid values for this column need to be just the two digit country codes, not the country code +dash+country name. The reason the dropdown selections include both the two digit country code and the country name is because most users will not know the two digit codes. Presenting the selections in this fashion will make t much easier for the user to make the proper selection.
So here is what I need: When the user makes a selection from the dropdown list, the resulting value needs to be the two digit country code only. Is there a way to incorporate this formula .... =MID(B2|1|2) ... in the vba procedure which runs after the user makes a selection? Or, is there another way to accomplish this?
I do not have any code for this as I am unsure if it is possible. I have a list of range names in a column (A) that refer to different sheets and in an adjacent column (B) I have a list of data. Is it possible to write VBA code that will allow me to copy each value in column B to the corresponding cell in the workbook that relates to the range name in column A.
I have been tasked with creating a data validation list. My data is contained on a separate sheet from my data validation list. I am using a named range to use the data for my data validation list. However, I am looking to add a criteria to my data validation list so that it only is populated with values based on another column on my data sheet.
For example, if I have a data sheet called "Employee" and I have two columns. Column A is a list of employee names and I have named a range in column A as "EmployeeName". Column B is used to define the category of employee. This value is a letter, for example, "A", "B", "C", or "D". This column does not have a named range as I don't know if I need one to get this to work.
I would like the data validation on one sheet to use a list of employees of a particular class from another sheet. Straight forward validation is easy using a validation list with a formula =EmployeeName. But how do I only list employees that have a category "A"? For some reason, I cannot get some of the formulas I have found while searching this message board to work.
I am using following code to apply data validation list. However this code gives error Intermittently. The error message is 'Application defined or Object defined error'. Also this code looks little cumber some. Will really apprciate if any one can put some ligh on why is this error appearing sometimes. Do I need to change something in the code or add few extra lines. I feel following points will be necessary when you check my code
1. The data of validation list is stored under the column heading 'Reported_By_List' 2. Validation is applied on the range under the column heading 'Reported Through' 3. Start and last Cell Address Of the cells of the column in which data of validation list is stored are extracted into the variables 'StartCellAddress1' & 'LastCellAddress1 ' 4. Start and last Cell Address Of the cells of the column on which data validation will be applied are stored are extracted into the variables 'StartCellAddress2' & 'LastCellAddres2'
Sub Validation1()
Dim wsName As String Dim RValue As String Dim WorkBookName As String Dim StartRow As Integer Dim StartColumn As Integer Dim LastRow As Integer Dim CellAddress As String Dim ColumnAddress As String Application. ScreenUpdating = False WorkBookName = ThisWorkbook.Name wsName = ActiveSheet.Name...........
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
I am attempting to use a named range as my Validation data source but have two questions:
1) It seems when you use a named range as a source the user can enter in any data they want in that cell. I really only want the user restricted to the list I give them. If I enter the list manually in the source box then it works but I really want to use a named range
2) My range is fixed to 10 cells and the user can enter in as many variables as they want (up to ten). When a user clicks on one of the cells that the validation is set to read the range the user has to always scroll to get to the top. When selecting the cell Ecel always defaults to the bottom choice in the list. I want to minimize the VBA because Mac users will be using this and VBA seems to be touchy with macs.
I'm creating a form with drop downs, and I'd like the answer choice someone makes for one question (ie- what county they're in) to affect the answer choices for a secondary question (ie- what city they're in).
I'd like to avoid using names, at least for the second dropdown (since there would be too many names, and in some of the questions in the data set things change too much for names to be a good option). I would also like to avoid using VBA to keep it simple and maintainable. Here is a simplified version of a small subset of the data.
Drop Down 1: County (options: Santa Clara County, Napa County) Drop Down 2: Cities/Towns (options: the cities/towns that relate to the above county selection, without using names)
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create Name: Fruit
Refers to: banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
I have a List of Different Fruits in Cells A1 to A5
Apple Banana Orange Strawberry Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
want a list of the defined names in a selection. So lets say the range is "A1 to G60". I would like the to see a list of each cells name and the associated address.
is there a way to force so that a cell value can be only of what a validation droplist offers, hence users can not enter their own values and have to use the droplist for cell content selection.
I have a worksheet where a number of the cells have been assigned names. I want to copy these cell names & create a list on another part of the worksheet. Does anyone have some code I could use to achieve this?
I'm trying to fill a list with some hard values. When I use the macro recorder it adds formula="choice 1;choice 2; etc", these are all separate values in the list. However if I use this within a macro I only have one option with all three values combined.
I have a Range on one sheet formatted like this and sorted by Sup then Rep:
Rep Sup John Sally Mark Sally Joseph Sally George Betty James Betty
etc..
I have a Validation Drop Down list where a Supervisor is chosen. There's a specific range that I would like to automatically fill in with the reps assigned to the Sup. This is driving me crazy! I already know how to obtain that list as another Validation Drop Down, but not quite sure how to make those values appear in a range instead of a Validation List.
I'm creating a sheet that takes three Validation Lists into account. The first two lists are based on named regions. The third list uses the first two lists to narrow a search down so that the user can pick what they want from a smaller selection. I'm using the code from Contextures.com to allow the user to double click the validation list to pop up a Combo Box. This allows me to show more than 8 selections at a time and also gives a little freedom on font and font size.
http://www.contextures.com/xlDataVal11.html
Since the third list is not based on a named region but rather code to compare the two previous lists, when I double click the third validation list a blank combo box pops up. it possible to pop up what ever lists are in the validation boxes.
This is the code that I have in the third validation box which States "The Source Currently evaluates to an error" but works fine for some reason. =OFFSET(CategoryStart, MATCH(B4, CategoryColumn, 0) - 1, IF(A4 = "Description", 2, IF(A4 = "ExtDescription", 3, IF(A4 = "PartNumber",4))), COUNTIF(CategoryColumn,B4), 1)
I tried making a named region that was based on the code, so that the list could change as the user selected different options from the first two lists. This gave me the same problems as I had before.
I am using Data Validation on some fields to create a drop down list from a named range! These fields however allow you to enter values that are not in the list.
Is there a way to make the cell have to be an entry from the data validation list?
I have a database output file where one of the columns contains managers names, often more than once. I want to apply an autofilter on manager name and then copy the result to another sheet or sheets. My criteria for the autofilter is a variable pointing to a list of names that at present I maintain by hand; a for-each-next loop then cycles through the names.
What I would like to do, before running the autofilter code, is to create the list of names via code. This would then automatically pickup names that are missing.
The code I have so far is below:
Public Sub find_managers() Dim managers1 As Range Dim names1 As Range Dim n1 As Variant Dim n2 As Variant
In my mind it should check the names in the unique list against the imported list and add any missing names.
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
Basically on a summary page, on sheet 1 say I have a formula which picks up the unit cost (I have this as an array across 5 years)
What I then want to do is multiply this by a volume driver. I have a list of these drivers on a seperate page, so for convenience lets say DRIVER_01,DRIVER_02 etc. These are also 5 years arrays.
So what I want to do it be able to select which driver I want to use for volume on the summary, from a drop down box I have set up, and then the formula pick up that named range, and not just recognise it as a text cell.
I need the ability to change the driver in the future, hence the drop down box. I can also get the unit array part to work fine, I'm just struggling to get this driver array to work..............
I have a list of names in column A and many of them repeat. I need to find a way of just listing the names Alphabetically (only Alphabetically if possible) that are there (without repeating any)
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
The idea is to create a liquor order sheet which takes items and prices from a liquor inventory workbook, which is part of the same file. i'm sure that you can do it all fancy with a macro, but unfortunately i'm not super experienced with excel. so i helped myself with what i know a bit -> drop down lists. I created an extra sheet which has 4 ranges on there... the liquor type (liquor, beer, wine), and the 3 sub classes for each type (red/white/blush/sparkling for wine, draft/import for beer and so on and so forth). On the inventory i named the range of all white wines "white", of all red wines "red" ..
On my order sheet i created a drop down list for type and created 2 more via "indirect" .. so when you select "wine" in the first one, the 2nd one will ask you for white/red/blush/sparkling and the last drop down then for the exact item according to the range on the inventory.
Hope what i did so far is understandable ^.^
Now my problem is that i want the unit cost to be copied when an item is selected. So you select "beer" in A1, "import" in A2, "corona" in A3... and the price for corona (which is written in a cell on the inventory sheet) should show up in A4.
I attached a screen of the inventory sheet so that you can see how it is structured.
