I'm trying to fill a list with some hard values. When I use the macro recorder it adds formula="choice 1;choice 2; etc", these are all separate values in the list. However if I use this within a macro I only have one option with all three values combined.
View 4 RepliesI've created seven names in my data validation source list on Sheet 3 in the following range of cells, A2-A7. My data drop down validation list is located on Sheet 1, A2 in the same workbook. I would like to trigger a macro based on the name I select in this drop validation drop down list that will fill out an address, telephone number, and email address in the following cells next to my data validation drop down list on Sheet 1: B2, B3, and B4. I want it to be designed so that users will select a name and have that person's corresponding address, telephone number, and email address fill right next to their name on the same sheet.
View 6 Replies View RelatedI am attempting to use a named range as my Validation data source but have two questions:
1) It seems when you use a named range as a source the user can enter in any data they want in that cell. I really only want the user restricted to the list I give them. If I enter the list manually in the source box then it works but I really want to use a named range
2) My range is fixed to 10 cells and the user can enter in as many variables as they want (up to ten). When a user clicks on one of the cells that the validation is set to read the range the user has to always scroll to get to the top. When selecting the cell Ecel always defaults to the bottom choice in the list. I want to minimize the VBA because Mac users will be using this and VBA seems to be touchy with macs.
I have a combobox whose list is filled with different ranges, on different sheets, selectable using option buttons. The code is shown below:
Private Sub OptionButton1_Click()
Dim ray
Dim Last
ray = Sheets("Trades").Range("B2:B500")
If OptionButton1 = True Then
With ComboBox1
.List = ray
.ListIndex = 0
End With
End If
End Sub
i have a list of surnames in column A in a spreadsheet i want to use this for the source of the combo box also i want this list to be unique and if the surname is not present i want to be able to put the name in the combo box and add it to the sheet
View 2 Replies View RelatedI have a Range on one sheet formatted like this and sorted by Sup then Rep:
Rep Sup
John Sally
Mark Sally
Joseph Sally
George Betty
James Betty
etc..
I have a Validation Drop Down list where a Supervisor is chosen. There's a specific range that I would like to automatically fill in with the reps assigned to the Sup. This is driving me crazy! I already know how to obtain that list as another Validation Drop Down, but not quite sure how to make those values appear in a range instead of a Validation List.
I have a monthly report showing actuals and budget for current month (or quarter) and year to date. Range names have been created for (1) each month, (2) each quarter and (3) year to date). I'm using the SUMPRODUCT function to extract information by account. For example:
=SUMPRODUCT(($A9=ACT_Account)*(ACT_Jan))
This formula works except I have to replace the "ACT_Jan" each month accordingly. Can a data validation list be created with the range names so that updating this formula monthly can be simplified? For example, changing "ACT_Jan" to "ACT_Feb" with a drop down list.
I'm creating a sheet that takes three Validation Lists into account. The first two lists are based on named regions. The third list uses the first two lists to narrow a search down so that the user can pick what they want from a smaller selection. I'm using the code from Contextures.com to allow the user to double click the validation list to pop up a Combo Box. This allows me to show more than 8 selections at a time and also gives a little freedom on font and font size.
http://www.contextures.com/xlDataVal11.html
Since the third list is not based on a named region but rather code to compare the two previous lists, when I double click the third validation list a blank combo box pops up. it possible to pop up what ever lists are in the validation boxes.
This is the code that I have in the third validation box which States "The Source Currently evaluates to an error" but works fine for some reason. =OFFSET(CategoryStart, MATCH(B4, CategoryColumn, 0) - 1, IF(A4 = "Description", 2, IF(A4 = "ExtDescription", 3, IF(A4 = "PartNumber",4))), COUNTIF(CategoryColumn,B4), 1)
I tried making a named region that was based on the code, so that the list could change as the user selected different options from the first two lists. This gave me the same problems as I had before.
I've got a named range which defined using a custom function. Lets call this named range [range1] which is defined by:
View 14 Replies View RelatedI have been tasked with creating a data validation list. My data is contained on a separate sheet from my data validation list. I am using a named range to use the data for my data validation list. However, I am looking to add a criteria to my data validation list so that it only is populated with values based on another column on my data sheet.
For example, if I have a data sheet called "Employee" and I have two columns. Column A is a list of employee names and I have named a range in column A as "EmployeeName". Column B is used to define the category of employee. This value is a letter, for example, "A", "B", "C", or "D". This column does not have a named range as I don't know if I need one to get this to work.
I would like the data validation on one sheet to use a list of employees of a particular class from another sheet. Straight forward validation is easy using a validation list with a formula =EmployeeName. But how do I only list employees that have a category "A"? For some reason, I cannot get some of the formulas I have found while searching this message board to work.
I'd like to create a list via Data validation-list. Anyone knows how to reference a range on another sheet of the workbook?
The range is =$Q$5:$Q$13
Is it possible to reference another sheet? If yes, how is is done?
I am using following code to apply data validation list. However this code gives error Intermittently. The error message is 'Application defined or Object defined error'. Also this code looks little cumber some. Will really apprciate if any one can put some ligh on why is this error appearing sometimes. Do I need to change something in the code or add few extra lines. I feel following points will be necessary when you check my code
1. The data of validation list is stored under the column heading 'Reported_By_List'
2. Validation is applied on the range under the column heading 'Reported Through'
3. Start and last Cell Address Of the cells of the column in which data of validation list is
stored are extracted into the variables 'StartCellAddress1' & 'LastCellAddress1 '
4. Start and last Cell Address Of the cells of the column on which data validation will be
applied are stored are extracted into the variables 'StartCellAddress2' &
'LastCellAddres2'
Sub Validation1()
Dim wsName As String
Dim RValue As String
Dim WorkBookName As String
Dim StartRow As Integer
Dim StartColumn As Integer
Dim LastRow As Integer
Dim CellAddress As String
Dim ColumnAddress As String
Application. ScreenUpdating = False
WorkBookName = ThisWorkbook.Name
wsName = ActiveSheet.Name...........
Basically on a summary page, on sheet 1 say I have a formula which picks up the unit cost (I have this as an array across 5 years)
What I then want to do is multiply this by a volume driver. I have a list of these drivers on a seperate page, so for convenience lets say DRIVER_01,DRIVER_02 etc. These are also 5 years arrays.
So what I want to do it be able to select which driver I want to use for volume on the summary, from a drop down box I have set up, and then the formula pick up that named range, and not just recognise it as a text cell.
I need the ability to change the driver in the future, hence the drop down box. I can also get the unit array part to work fine, I'm just struggling to get this driver array to work..............
Make a Data Validation dropdown list that also enters a range for cells, for example:
Kitchen ¦ High ¦ Upto 100 ¦ Easy ¦ Blank ¦ 2 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 week
Lounge ¦ Low ¦ Large ¦ Easy ¦ Blank ¦ 0 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 month
Bedroom ¦ Low ¦ Large 100 ¦ Easy ¦ Blank ¦ 1-3 ¦ Daily ¦ 1-3 ¦ Low ¦ >1 year
Bathroom ¦ High ¦ Upto 100 ¦ Easy ¦ Blank ¦ 0 ¦ Weekly ¦ 1-6 ¦ Low ¦ <1 year
I can make a dropdown list for:
Kitchen
Lounge
Bedroom
Bathroom
But if I select "Kitchen" I would like it to enter the rest of the cells in that row:
Kitchen ¦ High ¦ Upto 100 ¦ Easy ¦ 2 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 week
The total number of rows I use is 10, and the number of items in the dropdown list will be 30.
The data in the cells 2 to 10 does not change from that first set to its data menu name.
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I have a list for example with two variants "YEs, "NO"..
Is there any possibility to choose YES or no in any cell an reflect the same value in another list on another sheet.
I'm not sure if its possible to do what I want. I'm trying to do it without VBA as my users might have a high macro security setting.
I have a validation dropdown in A2 where they pick 'yes' or 'no' for FLSA. I would like B2 to be a dropdown (validation, listbox, whatever) that would change based upon A2. If A2 is 'yes' I want to use the data in A5:B7 and if its 'no' use A10:B12. Ultimately I want B2 to equal one of the numbers from A5 - A7 or A10 - A12. However when they click on the drop down they see the combo of column A and columb B as column A has no meaning for the user.
I have a file where I need the user to fill in a value in a single cell (A1) in order for the data validation I have set up in column B to work. Can I set up a second data validation in the cells in column B? Or is there a way to enter a data validation in cell B11 that would error the user if A1 is not filled in, and circle the cell (A1) that they need to fill in? B11 currently returns the sum of B3:B10.
A
B
1
Straight
2
Time
3
Sun
4
Mon
5
Tues
6
Wed
7
Thurs
8
Fri
9
Sat
10
Sun
11
Total Overtime
I can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies View RelatedI'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies View RelatedI have a List of Different Fruits in Cells A1 to A5
Apple
Banana
Orange
Strawberry
Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
I would like to exclude blanks from the source of a validation list, I have found a really neat solution for vertical list in this topic, I have modified it, but I have missed something, the formula is not working.
View 2 Replies View Relatedi mtrying to get a validation list change depending on what is chosen in another list. I have attached an example, Yellow box is my validation and weather List 1 or List 2 in chosen I want the red box to be a choose of the list attached to those options. I've tried to put an If in there but I’m al a loss.
View 3 Replies View Relateddear....can i set width in list box data validation (width in cell i set short).thanks
View 9 Replies View Relatedis there a way to force so that a cell value can be only of what a validation droplist offers, hence users can not enter their own values and have to use the droplist for cell content selection.
View 2 Replies View RelatedI am trying to make some of my data validation dropdown list boxes narrower. I was told one way to do that is to use combo boxes. (If there are any other ways, please let me know!)
I don't think my combo boxes are working. I had tried to make a combo box appear in each data validation pulldown cell by using this tutorial:
http://www.contextures.com/xlDataVal10.html
I followed this tutorial word for word, but when I try to test the code at the end by double-clicking on a data validation pulldown cell, no combo box appears.
I am using Data Validation on some fields to create a drop down list from a named range! These fields however allow you to enter values that are not in the list.
Is there a way to make the cell have to be an entry from the data validation list?
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
First Name
Surname
Paul
Smith
Paul
Jones
Tony
Phillips