i have csv data which has splits cells due to commas between numbers, and then moves data further to the right, is there a way to fix this, so for example this is what some cells look like
31874.90 JPMORGAN
but need to be like this
31 874.90 JPMORGAN
I have attached an excel sheet that takes 2 inputs in cells A2 and A3, sums them in cell A6, and then writes the outputs in cells A9 onward, recording the new sum as changes are made to cells A2 and A3.
Below the last output in the list (Cells A9 to ...) I want to have a Sum of the above outputs. In other words, I want a sum of the previous outputs, and I want it below the final output, moving and recalculating each time another change is made to A2 or A3. How can I do this?
I know how to make a dynamic chart that shows only the last X number of rows. However, I'm looking to do something slightly different.
I have columns A and B both with 3000 rows of values. I would like to make a bar graph. Some of the rows are NA(), some have the data that I would like to graph. The data I would like to graph is always in a group, say from rows 100 - 200, but this could change in location from rows 95 - 195 instead, and could also change in number of rows to be rows 95 - 150 (ie. 55 rows rather than 100 rows). I would like my bar graph to be able to search Columns A and B and pick out the section with data (ie. not NA()) and graph it. I had introduced the NA() hoping that I could just put the entire range in the chart and it would pick out the numbers, but I gather this only works when using a scatter graph which just won't work for my needs.
I have a data tabel in Sheet 1 & Sheet 2
In sheet 3 they are combined via reference in order for me to do calculation in the input - They are combined in sheet3 as the columns are not identical.
Because the data-tables will be updated via sharepoint, i have to link to cells beneath the data-tables as i expect these will be fill out when the tables update.
My problem is that when the tables update, i dont see the updates in my "combination" sheet. it appears the the data tables add a new line, which moves my cell reference 1 line down.
Ex: Had a reference in Sheet1'E3 - after the data table updates the reference is now Sheet1'E4.
I have a workbook that starts the beginning of the month by entering daily hours in cell D3 (Day 1 in cell D3, day 2 in cell E3, day 3 in cell F3 etc). Column B has several codes, but the one code the macro looks at when going down the current day is a letter "W" for "Worked". Therefore, Rows 4, 5, 9, 12, 56 (examples only - it changes daily) etc. could have a "W" and when the macro is ran, evertime it sees a "W" it includes the hours found in row 3 of the applicable day i.e. starting on row 4 the formula is =if($B4=D$3,D$3,""). This copies to the bottom row using the shortcut (Ctrl + Down Arrow) to find the bottom. What I have done is entered Zeros all the way down and changed Zero Values so they don't show.
Where I get in trouble is if a zero is removed, the shortcut stops at that break thinking that's the bottom. The bottom moves as we remove equipment out of the line up or add new equipment. What I am trying to do is have Excel figure out where the bottom row is for each daily calculation when the macro runs down the daily column.
I've a master sheet called records. It consolidates all the data from various worksheets. Overtime, the lists gets very long. So I'm proposing this. I want a macro which - Shift all the data yearly into a new directory at
G:MMTPMVarious StockArchive. When it saves at this directory it should bear the year as the folder name. The dates are retrieved from column H. - it should be operated at the every end of the year.
I have a Workbook (only 1 sheet) that is filled out each month and consists of sales and revenue data. I need to copy the total sales and total revenue and paste them to another sheet. The only problem is that it is never consistent as to which cell the totals will be located in. They will always be in the same column, but almost never in the same row.
For example, one month there will be 8 individual sales and the total will be in Cell F13, but the next month will be F20. THe same needs to be done with Total Revenue (which is always one cell right of the Sales Total) I need to copy and paste the cell with Total in it (in this case F13) and do the same for each month after. This is not difficult to do in Excel, but i need some code to include this process in a macro.
In design mode on my UserForm, I have an object on top of all other objects (it's hidden until a button is clicked). That's how I designed it and it was working fine when I ran the form. Now, when I run the form and click the button, the object appears at the bottom below all other objects. I've tried closing Excel & re-opening it, setting the ZOrder in design mode and in the CommandButton code--nothing works. If I did do something to cause this--I have no idea what it was. I've been moving and re-sizing some objects, but not adjusting the ZOrder.
View 9 Replies View RelatedI wish to create a button which will allow the user to goto the page in my spreadsheet.
I no i can use macros or hyperlinks to do but i can only use this button once for it to work. I want to cut and paste the button to save time.
When mouse moves over the date box and then a calendar appears. Can you do something like this in Excel 2003?
I am using a form textbox on a worksheet. I have the textbox positioned where I need it to be but when I print the worksheet the textbox moves out of position.
I have a single figure and as the figure increases and moves through thresholds the pay changes. e.g.
Number of sales payable = 15.66
Level 1: 1-10 pays 100 for each that falls in this threshold
Level 2:11-15 pays 150 for each that falls in this threshold
Level 3: 16-20 pays 200 for each that falls in this threshold
Level 4: 21+ pays 250 for all above this
I want to work the amount payable with a formula.
It should be $1849
Is there a formula that can calcualte this without me manually figuring out how many in each threshold.
I have 2 Listbox in Sheet3 & lists in Sheet1 & Sheet2 in columns A:A. When I delete columns in this Sheets or insert new columns List moves forward i.e. But I need The ListBox show allways List in the Columns A:A.
View 4 Replies View RelatedI need to format some climatic data from a weather station into a desired format. There are a lot of cut&paste and transposing involved. I think it will be easy but tedious for anyone trained in VB to write a macro but unfortunately I am not. I've tried recording a macro but it turns out that it is not general enough to deal with all the spreadsheets that I've got.
I've attached a spreadsheet which shows the original format (in sheet 1) and the desired format (in sheet 2). To briefly describe, I only need the temperature data for 8am and 2pm, the rest of the information in sheet 1 is useless to me.
I have around 30k data. which is in invalid format.
Ex: 12987654321vinay kk 876543219
32567456789 kkccjhg fo 345678921
I want to convert this into correct format as below with start letter from
MOD, 987654321,, vinay, kk,87654219
MOD,567456789, , kkccjhg, fo,345678921
I want to know which are formulas I have to use to get this info in correct format.
Need a macro that finds the "X" in column A and moves it to the next row. Also when "X" is already at the last row (row 11 in my example) the next move would place the "X" at the first row (row 2). Looping I believe is the correct term. I have attached a simple spreadsheet example
View 4 Replies View RelatedI've got a sheet where I've got products in one column.
The second criteria is "week #" for which the row remains consistent but the column varies e.g. "week 8" could be in cell L12 today and in L18 tomorrow.
I would like to return the value of the cell at which a particular product and week intersect. e.g. if "product a" is in B20 and "week 8" is in L18, I want the value of cell "L20" returned.
Product to determine Row #, Week to determine Column # for returning value.
If they interest multiple times, I would like to sum up the values intersecting.
Neither product nor week # is unique in the sheet.
vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
I have the following data retrieved via import data tools ...
View 9 Replies View RelatedI have a sheet with data 7 columns wide and up to 1500 rows long. Below are a few lines from the sheet. The data from the sheet is grouped into "months" as shown in the header down the first column, "Show June, 2013..." and "Show July, 2013...", and so on. Is there a way I can make Excel re-align the data into ONE long row of data for each month? Each new month row must be "triggered" by the text (like the word "Show") because the actual cell number of where the new month begins may change with new updates. I want to do this because I plan to refresh the data once at the end of each day from the web and apply the new data to the "next" row of data. So eventually, I can have a history of "Last" values I can chart for each "strike" for each month.
CALLS
PUTS
Show June, 2013 Options Hide June, 2013 Options
Symbol
StrikePrice
Vol
Last
Last
Vol
Symbol
quote
15.00
2.00
14.25
0.02
22.00
quote
[Code] ........
I have a small table, 6 rows, 2 columns which looks something like:
Apples 3
Pears 1
Bananas 0
Cherries 2
Oranges 1
Grapes 1
The total sum of column B will always be 8.
What I want to produce is a range, say d1:d8 which reproduces the data in a format like:
Apple
Apple
Apple
Pear
Cherry
Cherry
Orange
Grape
i.e. responding to the number of items in the former table specified.
I'm sure it can be done with some long stringed If statements mixed with counts, but do any of you have any good ideas for formulas in d1:d8?
I am seeking the expertise of you knowledge folks to advise me whether it is possible to create a "script" in Excel to jumble up certain letters in an entry?
Let me explain. What I have are 4 separate columns with data in them. I need to somehow rearrange them into a certain format, like an encryption I suppose.
Here's an example of some data I have :
COL 1 COL 2 COL 3 COL 4
ABCD EFGHIJ KLM NOPQ
What I need to do is jumble those up so they appear in the following format:
COL 1 COL 2 COL 3 COL 4
CDAB GFEHIJ LKM NPOQ
Is it possible to do this in Excel? You're probably wondering why I don't do it manually, but there are over 20,000 records that need jumbling up and obviously that would take a very long time.
I think I have a similar problem as this thread http://www.excelforum.com/excel-prog...o-columns.html. The answer is probably somewhere in the forum, but I looked around and I can't figure it out on my own.
Basically, I copied some data off a website and now I am trying to organize it so it is usable. Here is my example. I would like to put the data below into usable columns. The only data I need is the hospital name (column A), location (column B), Births (column C), and Beds (column D). This is how the data currently appears in excel:..............
I often download data from various web sites - this is data that is displayed on a web page in tabular format, and often consists of hundreds of lines. I typcally Select All, then Copy, then go to a blank spreadsheet and Paste. After a bit of reformatting, I'm usually in good shape. The problem is, that sometimes the contents of a cell might have been "5-2" (without the quotes), and it comes through on Excel as "May 2". Without proofing each cell, I can't just make the assumption that the original was "5-2" - it might have been "5-2-10" (but not a date).
The normal Paste Special options are not available when I do this, so I can't paste them in as values. I have tried formatting the worksheet at text prior to doing the copy but that does not work.
See the attached file. In the RawData tab, I have the Type, The Date, and total for that date and type. Using a macro, i would like to redesign the output(onto another sheet) so it can be updated to a database table(i already have the code to export to database). The output should look like what is in the "OutputExample" tab. Figures in the OutputExample tab are only for the first three dates. So currently, I have the output as:
View 4 Replies View RelatedI have been trying to produce a macro that will format data of varying lengths. Basically, I pull data from a database and export it into excel. I have a macro that will format the first few lines fine. Unfortunately, there are a few lines of info at the end of each report that need to be deleted. I cannot figure out how to make excel reach the end of my data a delete these two lines. If I build the macro on one report that has 100 lines and delete line 99 and 100, and then attempt to run the macro on a report that has 150 lines - lines 99 and 100 are still deleted.
Is there a way to delete the last couple of lines of data of a spreadsheet?
I have a data set in excel which is the following format which I would like to convert into a text file with a different format. The excel sheet format is as follows:
V C 1 2 3
1 23 0.06 0.04 0.03
1 12 0.09 0.06 0.03
2 5 0.11 0.07 0.05
2 11 0.12 0.08 0.04
The text file should have the above data in the following format with brackets and comma:
(V,C,1)[value]
For example:
(1,23,1)[0.06]
(1,23,2)[0.04]
(1,23,3)[0.03]...........
Check and format some data. I have 100,000+ rows so kinda need a macro to do it.
I have data like this
Sheet1 ABCDEFG1start_date start_time end_date end_timeTypeSOC Before SOC After
208/01/201218:36:2008/01/201218:40:00T 308/01/201218:45:1208/01/201218:50:44T
408/01/201218:52:1208/01/201219:50:46C3446508/01/201219:54:2708/01/201221:44:40C
[Code] .....
I'm trying to merge all the "C" rows in Column F into one row, like this:
Sheet1 ABCDEFG14start_date start_time end_date end_timeTypeSOC Before SOC After
1508/01/201218:36:2008/01/201218:40:00T 1608/01/201218:45:1208/01/201218:50:44T
1708/01/201218:52:1208/01/201223:02:00C341001809/01/201208:16:5109/01/201208:44:08T
1909/01/201208:45:1109/01/201208:49:55T
So you would just keep the first row,but replace the 'end date' and 'end time' with the 'end date' and 'end time' from the last row and same with the SOC.
check and format some data with some code.
I have 100,000+ rows that look like this
Sheet1 *ABCDEFG1start_date start_time end_date end_timeTypeSOC Before SOC
After208/01/201218:36:2008/01/201218:40:00T**308/01/201218:45:1208/01/201218:50:44T**408/01/201218:52:1208/01/201219:50:46C3446508/01/201219:54:2708/01/201221:44:40C4681608/01/201221:48:4108/01/201222:02:36C8187708/01/201222:06:4608/01/201222:11:49C8787808/01/201222:15:5008/01/201223:02:00C87100909/01/201208:16:5109/01/201208:44:08T**1009/01/201208:45:1109/01/201208:49:55T**
I'm trying to merge all the "C" types in Column E into one row like this
Sheet1 *ABCDEFG14start_date start_time end_date end_timeTypeSOC Before SOC After1508/01/201218:36:2008/01/201218:40:00T**1608/01/201218:45:1208/01/201218:50:44T**1708/01/201218:52:1208/01/201223:02:00C341001809/01/201208:16:5109/01/201208:44:08T**1909/01/201208:45:1109/01/201208:49:55T**
So basically, I need to use the 'start date' and 'start time' from the first row and the 'start date' and 'start time' from the last row. Also use the first 'SOC before' and the last 'SOC' After'.
I have more data in column h - column z, so I need to delete the entire row of the additional "C" rows. Otherwise the data will be misaligned.
Macro or formula to reformat some data.
I have like data like this:
Column A = Date
Column B = Single Distance
Column C = Total Distance for that date
Sheet1 ABC1DateIndividual Distance Total distance 204/01/2011919304/01/20111019405/01/2011
212505/01/20111012606/01/2011926706/01/2011326806/01/20111026906/01/20112261006/01/2011226
It would be really useful if I could format it like this
Sheet1 FGHIJ1Total Individual 219910 312210 42631022
So basically, it puts all the information on one row for a particular date.