Need a macro that finds the "X" in column A and moves it to the next row. Also when "X" is already at the last row (row 11 in my example) the next move would place the "X" at the first row (row 2). Looping I believe is the correct term. I have attached a simple spreadsheet example
View 4 Repliesdeletes a row if it finds a specified value in a specified column (in this instance, "NB" in column E). However, it is very slow and some end users are complaining about the amount of time it takes to run. Here's what I'm using at the moment:
View 5 Replies View RelatedI need a piece of VBA code to assign to an Excel form that determines the maximum value of a subset of one column whose cognate rows in an adjoining column satisfy a particular value.
View 2 Replies View RelatedWhat is wrong with this formula? I have used it before just fine, but sometimes including now it won't work.
PRODUCT_IMAGE Images 244-447439 244-455507 244-455507 244-455508 244-455508 244-455509 244-455509 244-455512
=MATCH(B2,$A$2:$A$412,0)
We can clearly see that we have a match in rows 2 and 1 columns A and B, but I am getting #NA. I have sorted the columns A-Z as well. I have also tried formatting the columns different ways and I still get #NA.
I need to conditionally format column B if it finds a match in A.
I have a Macro that finds in Column F duplicates and adds an Alpha Character (A-Z) to the last right position in the filed.(1-12 Alpha/Numeric) .
It's set to check all rows until a specific number of rows are reached. The current code does this until intCount and intRow equals 1500. The number of rows vary in each file.
I need a Macro that Copies all the duplicate values in a column (and their corresponding rows) over to a new spreadsheet.
For example,
1 A B C D E F G
1 Z X Y D R M T
2 B 5 7 8 9 0 4
Because 1 is a repeated value in the first column, the macro copies the first two rows over to a new spreadsheet.
I have attached an excel sheet that takes 2 inputs in cells A2 and A3, sums them in cell A6, and then writes the outputs in cells A9 onward, recording the new sum as changes are made to cells A2 and A3.
Below the last output in the list (Cells A9 to ...) I want to have a Sum of the above outputs. In other words, I want a sum of the previous outputs, and I want it below the final output, moving and recalculating each time another change is made to A2 or A3. How can I do this?
I have a workbook that starts the beginning of the month by entering daily hours in cell D3 (Day 1 in cell D3, day 2 in cell E3, day 3 in cell F3 etc). Column B has several codes, but the one code the macro looks at when going down the current day is a letter "W" for "Worked". Therefore, Rows 4, 5, 9, 12, 56 (examples only - it changes daily) etc. could have a "W" and when the macro is ran, evertime it sees a "W" it includes the hours found in row 3 of the applicable day i.e. starting on row 4 the formula is =if($B4=D$3,D$3,""). This copies to the bottom row using the shortcut (Ctrl + Down Arrow) to find the bottom. What I have done is entered Zeros all the way down and changed Zero Values so they don't show.
Where I get in trouble is if a zero is removed, the shortcut stops at that break thinking that's the bottom. The bottom moves as we remove equipment out of the line up or add new equipment. What I am trying to do is have Excel figure out where the bottom row is for each daily calculation when the macro runs down the daily column.
i have csv data which has splits cells due to commas between numbers, and then moves data further to the right, is there a way to fix this, so for example this is what some cells look like
31874.90 JPMORGAN
but need to be like this
31 874.90 JPMORGAN
I've a master sheet called records. It consolidates all the data from various worksheets. Overtime, the lists gets very long. So I'm proposing this. I want a macro which - Shift all the data yearly into a new directory at
G:MMTPMVarious StockArchive. When it saves at this directory it should bear the year as the folder name. The dates are retrieved from column H. - it should be operated at the every end of the year.
I have a Workbook (only 1 sheet) that is filled out each month and consists of sales and revenue data. I need to copy the total sales and total revenue and paste them to another sheet. The only problem is that it is never consistent as to which cell the totals will be located in. They will always be in the same column, but almost never in the same row.
For example, one month there will be 8 individual sales and the total will be in Cell F13, but the next month will be F20. THe same needs to be done with Total Revenue (which is always one cell right of the Sales Total) I need to copy and paste the cell with Total in it (in this case F13) and do the same for each month after. This is not difficult to do in Excel, but i need some code to include this process in a macro.
In design mode on my UserForm, I have an object on top of all other objects (it's hidden until a button is clicked). That's how I designed it and it was working fine when I ran the form. Now, when I run the form and click the button, the object appears at the bottom below all other objects. I've tried closing Excel & re-opening it, setting the ZOrder in design mode and in the CommandButton code--nothing works. If I did do something to cause this--I have no idea what it was. I've been moving and re-sizing some objects, but not adjusting the ZOrder.
View 9 Replies View RelatedI wish to create a button which will allow the user to goto the page in my spreadsheet.
I no i can use macros or hyperlinks to do but i can only use this button once for it to work. I want to cut and paste the button to save time.
I know how to make a dynamic chart that shows only the last X number of rows. However, I'm looking to do something slightly different.
I have columns A and B both with 3000 rows of values. I would like to make a bar graph. Some of the rows are NA(), some have the data that I would like to graph. The data I would like to graph is always in a group, say from rows 100 - 200, but this could change in location from rows 95 - 195 instead, and could also change in number of rows to be rows 95 - 150 (ie. 55 rows rather than 100 rows). I would like my bar graph to be able to search Columns A and B and pick out the section with data (ie. not NA()) and graph it. I had introduced the NA() hoping that I could just put the entire range in the chart and it would pick out the numbers, but I gather this only works when using a scatter graph which just won't work for my needs.
When mouse moves over the date box and then a calendar appears. Can you do something like this in Excel 2003?
I am using a form textbox on a worksheet. I have the textbox positioned where I need it to be but when I print the worksheet the textbox moves out of position.
I have a single figure and as the figure increases and moves through thresholds the pay changes. e.g.
Number of sales payable = 15.66
Level 1: 1-10 pays 100 for each that falls in this threshold
Level 2:11-15 pays 150 for each that falls in this threshold
Level 3: 16-20 pays 200 for each that falls in this threshold
Level 4: 21+ pays 250 for all above this
I want to work the amount payable with a formula.
It should be $1849
Is there a formula that can calcualte this without me manually figuring out how many in each threshold.
I have a data tabel in Sheet 1 & Sheet 2
In sheet 3 they are combined via reference in order for me to do calculation in the input - They are combined in sheet3 as the columns are not identical.
Because the data-tables will be updated via sharepoint, i have to link to cells beneath the data-tables as i expect these will be fill out when the tables update.
My problem is that when the tables update, i dont see the updates in my "combination" sheet. it appears the the data tables add a new line, which moves my cell reference 1 line down.
Ex: Had a reference in Sheet1'E3 - after the data table updates the reference is now Sheet1'E4.
I have 2 Listbox in Sheet3 & lists in Sheet1 & Sheet2 in columns A:A. When I delete columns in this Sheets or insert new columns List moves forward i.e. But I need The ListBox show allways List in the Columns A:A.
View 4 Replies View RelatedI'm practicing my VBA and can't get this practice code to work, the syntax looks good but all it does is set the current cell to 23. and I want it to keep going up the column until it find a cell with any value and then change it to say 23. if the value is empty it should keep going up.
Sub chngevalue()
If ActiveCell.Value Is Nothing Then
ActiveCell.Offset(-1, 0).Select
Else
ActiveCell = 23
End If
End Sub
I did check the internet and my reference books and wasn't able to find a clear reason.
i want delete row E&F depends upon blank cells in range of F:F column...though vba
View 6 Replies View RelatedI have a macro that needs to walk down a list of values and when it finds breaks in the values, it will insert a formula for a calculation. The problem I'm having is getting the code to loop correctly until it finally finds the value "End" when it should stop (when I play around with the code, sometimes I can get it to continue the loop, but it blows past "End" and then it experiences an error because it can't end.
Sheets("Master").Select
Range("B1").Select
ActiveCell.Offset(1, 0).Select
AssetIDStartRange = ActiveCell.Address
X = 0
Do
ActiveCell.Offset(1, 0).Select
X = X + 1
Loop Until ActiveCell.Value ""
SortCriteriaName = ActiveCell.Value
ActiveCell.Offset(-1, 1).Select
ActiveCell.Formula = "=SUMIF($B13:$B5000," & """" & SortCriteriaName & """" & ",$H$13:$H$5000)"
ActiveCell.Offset(0, -1).Select
If ActiveCell.Value "End" Then....................
I'm tying to finds the most recent X or O. Then takes the price on that day and compares it to the current price and based on the difference either higher or lower puts out an X if the current price is higher and an O if the current price is lower by the Half StartData - however when i get to about 6 IF statement it freeze up and it wont give me the X or O's ...
View 9 Replies View RelatedI'm trying to get a count of the number of workbooks in a directory and it keeps returning 0 when there are three WBs in the directory. What am I doing wrong?
Here is my code.
With Application.FileSearch
.LookIn = "C:Documents and Settingsdt64864DesktopTesting"
.Filename = "*.xls"
.FileType = msoFileTypeExcelWorkbooks
.Execute
MsgBox (.FoundFiles.Count)
End With
I'm looking to have a row at the top of a worksheet which I can type in, so that only the rows below which contain that information will show up. For example, say I have the following 3 rows, 2 columns each:
Cat Feet
Cat Head
Dog Feet
I'd like to have an additional row so that if I typed in "Cat" only the "Cat Feet" and "Cat Head" rows would show up. Likewise, if I typed in "Head" in the proper column only ""Cat Head" would show up.
On Error GoTo importError
For Each b In Range("names")
If b = FILE.Sheets("Sheet2").Range("e3") Then
ThisWorkbook.Activate
ThisWorkbook.Sheets("Sheet2").Select
b.Row.Value = n
For Each c In Range("dates")
If c = FILE.Sheets("Sheet2").Range("e5") Then
ThisWorkbook.Activate
ThisWorkbook.Sheets("Sheet2").Select
c.Column.Value = m
ActiveCell = nm
Set Targ = ActiveCell
Targ = system
Targ = FILE.Sheets("Sheet2").Range("e20")
End If
Next
It doesnt work, it gets to b.row.value and throws up an error, i realise im using the wrong code but I dont know enough vba script to resolve the issue
I have a timesheet and a data base spreadsheet, the db spreadsheet opens the timesheet (many, one after another) and I want it to look for each name in the db and if the name cell on the timesheet it has open matches then i want it to remember the row value (on the db), then look through the dates in the db until it finds the matching date to the one in the timesheet, i want it to store this column value (in the db) so I can concat the row and column to get the activecell where I will be putting the total hours (a single cell reference) from the timesheets into the db.
I'm simply trying to search a directory for .xls files and count them. I have previously used the following code successfully to do so, but for some reason it has recently stopped working. Debugging shows .FileSearch.Count() = 0 after every search. I have atleast half a dozen .xls files in the "Reports" folder relative to the active workbook.
strReportDirectory = ActiveWorkbook.Path & "Reports"
With Application.FileSearch
.NewSearch
.LookIn = strReportDirectory
.SearchSubFolders = False
.Filename = "*.xls"
.Execute
'loop through each workbook in the directory
For i = 1 To .FoundFiles.Count
msgbox("I found: " & .FoundFiles(i))
next i
I need to add a space in front of a string of numbers/letters, but it still doesn't seem to match what's in the lookup range. Granted, i get the lookup range from HQ, so there may be a formatting issue.
View 2 Replies View RelatedI am trying to make a macro, but because of my inexperience, it's not working out. I have got a big list (list 1) of numbers in column E. each number has some information in the cells of columns C, D and L, all in the same row. on the same sheet, I have got another, smaller set of numbers (list 2), also in column E but at the bottom of the sheet. the numbers in list 2 are all present in list 1 (but not all numbers in list 1 are present in list 2). the columns C, D and L on the same row of the numbers in list 2 are empty...............
View 4 Replies View RelatedIn Column A I have first names, In column B I have last Names, in column C I have id letters,
Column D another list of First Names And In Column E I have another list of Last Names
So what I need to do in F2 is Look at the name Last name in E2 (Lets say its Smith) then look down the Last names In Column B when you find a match look at the First name on the same row to see if the first 3 letters are the same as the first 3 letters in D2 if they are then put the id that's in cell C into F2 if not ""
I've been trying for hours but no luck, also if you do manage to do it can you tell me how you get it to look at the first 3 letters and how I could change that to 4?