Dates On Y Axis Monthly Interval
May 13, 2013Dates on y axis. How can the spacing be set to reflect months? I am presently using a Line Chart which recognizes dates on x axis but not the y.
View 7 RepliesDates on y axis. How can the spacing be set to reflect months? I am presently using a Line Chart which recognizes dates on x axis but not the y.
View 7 Replieshow to plot dates which are unequal in interval
the dates that I want to plot are the following:
1/2/13
1/7/13
1/14/13
1/21/13
1/28/13
2/4/13
2/11/13
2/19/13
2/25/13
3/4/13
3/11/13
3/18/13
3/25/13
I want to appear them exactly on my X axis no different dates in between them.
I have got a lot of data to put in a chart that updates every 5 minutes with new data - i have a chart that Line chart that shows this.
It shows the cost of something every 5 minutes.
I have put this in a chart using offset but obviously i want to show the cost over the course of the day - because this updates every 5 minutes, the axis at the bottom (which has the time of the data) is massive and doesn't look good.
Is there a way to show the axis at an hourly interval but keep all the data in the chart?
I have a column of "timestamp" data (in mins) which i want to filter by a given time interval, say 10 mins. Then i want to count the number of records for each time interval and output the data to a sheet. how can i achieve this? through vba?
I attached a pic illustrating what i want to accomplish.
QQ截图20140429104406.png
I have a simple piece of code that creates a chart using the the values in column A as the x-axis and the values in column E as the y-axis. The values in Column A are all dates in this format: mm.dd.yyyy. However, when I collect the x-values they always appear as numbers (1,2,3). Even if I format the axis to Dates, they appear as 1.00.1900, 1.02.1901, etc.
Here is the code (also, I would like a VBA solution but if this is with excel's chart tools, so be it).
Code:
Sub Macro2()
ActiveSheet.Shapes.addChart.Select
ActiveChart.ChartType = xlXYScatter
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection(1).Name = "=""Rate of Productivity"""
ActiveChart.SeriesCollection(1).XValues = "='Sheet1'!$A$2:$A$4"
ActiveChart.SeriesCollection(1).Values = "='Sheet1'!$E$2:$E$4"
End Sub
Two questions:
1) How do make values on x-axis as words? E.g. apples, oranges, etc.
2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.
I am new at excel and have very limited experience. I have a employee training database, with employees (in column A2:A54) and the certification names (in row A1:AS1) that I must generate a monthly report on employees that are expiring within the current month. The cells are already conditionally formatted to change colors for one month prior to expiration date, current month of expiration date, and past the expiration date.
I am manually gathering the data then adding it to another sheet. In the mist of trying to gather data, I am missing and/or overlooking information. I wanted to know if there is a way to automatically generate a report based on the expiration dates that would pull the employees name and which certification is expiring or expired, preferable both. I have tried reading threads and applying advanced filters but due to the number of certifications it is not functional to do it this way.
I have attached a sample of the spreadsheet : ETD.xlsx‎
I am trying to create a chart with dates from the past 6 weeks (one week at a time). The horizontal axis shows the dates from my data page correctly until I make one of the other data fields a secondary axis and then my dates change from the actual dates on the data page to 1-Jan-00, 2-Jan-00, through 6-Jan-00.
When I do the select data and look at the dats in the Horizontal Axis labels box, it shows the real dates. Why won't they show up on the chart as actual dates?
Using Excel 2007. Would like to format X-Axis values to display 1st month and 13th month as Feb 2, '08 for example. I would like the other 11 tick marks to remain. Sample attached ( Saved in 2003 format, I .xlsx was invalid file type)
4th micro chart uses F1:F13 for values for x axis
I want to draw a chart in Excel, in X axis Dates and in Y axis some other data. The dates which fall Saturday and Sunday will show in RED colour. Other dates will show in default colour.
View 7 Replies View RelatedI'm trying to combine monthly calculations with "today" and with "workdays"
Example:
start date = 01/01/2009
today's date 09/16/2009
formula result = 10/01/2009 ; or if 10/01/2009 is a Sunday, result = 09/29/2009 (not 02/01/2009, 03/01/2009, etc)
=edate gives me a month but it doesn't skip weekends or calculate beyond today's date
I need to gather total dollar amounts from a column based on their date/month entered.
I have a sample attached, in cell L2 for example I would need to gather all the dollar amounts in Column G that were entered for that month in column B that correspond to the month in column K.
I got a problem with displaying my dates correctly on the X-axis of my combined column - line graph. For some reason X-axis labels appear as consecutive numbers with regards to number of data points. Please see attached.
Also, why does the indent change as seen in this screenshot?
Last but not least, how can I prevent my secondary axis label from coinciding with the labels as seen here?
May_Daily_and_Total_Revs_by_date.xlsx‎
I am working with the Ganntt chart and horizontal bar charts but can't seem to figure out a way to force the X-Axis to behave properly.
In Excel 2007, I am trying to get the X-Axis to show major units of Months. However, in my chart options I can only change the Y-Axis to be Date/Monthly.
Changing my data layout (from the below) to be a vertical format produces the same problem, just in the other direction.
My data looks as follows:
System
Blocker
Production
Migrataion
Retired
Sys1
1/1/2012
780
Sys2
1/1/2012
400
60
90
Sys3
2/1/2013
30
5
1
The Blocker column is formatted as "No Fill" in order to cover a portion of the time-scale.
My X-Axis displays as random dates throughout the period and all of my data displays properly in terms of the scale on the grid.
What is NOT working is that the dates shown on the X-Axis really need to be based on a Monthly scale instead of the randomly selected dates Excel is using.
20120823.xlsx
I can't seem to find the right combination of options to make that happen or force a scale on the X-Axis.
I have a table of yearly totals for the amount spent by x. I also have a growth rate for each month so for example in 2001 in jan the growth rate might have been 0.3% and feb 0.5% What I want to do is for each month based on the growth rate and the total produce a value for each month which sum to the total amount. It's also important to note that it restarts each year.
Link for excel file is here: [URL] ...........
I’m currently pulling data into two columns labeled “Monthly” & “Non-Monthly” respectively. They indicate work orders with a frequency of “Monthly” or “Non-Monthly”
The Monthly data is obtained using the following formula:....
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies View RelatedI have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.
View 1 Replies View RelatedI've put together code to construct a chart
It all works fine but I've noticed an odd quirk which I can't explain nor can I seem to fix. Here's the (reduced) code :
Code:
Dim appExcel As Object ' Excel Application
Dim chtPareto As Object ' Chart
Set appExcel = CreateObject("Excel.Application")
Set chtPareto = appExcel.Charts.Add
With chtPareto
' Primary category axis
[code]....
The category (x) axis title should be horizontal, whereas the value (y) axis title should be rotated. Stepping through the code, when I .SetElement for the category axis title, it appears horizontal as planned. However, as soon as I .SetElement for the rotated value axis title, the category axis title also rotates.
I have some numeric data that has to be put on a log chart. but there is no option for log charts. so i converted my data to log and then drew a chart but i am unable to edit the axis intervals and starting axis value. whenever i change the value it gets back to its default value,ie 1. can anyone tell me how to draw log chart or how to edit axis intervals and starting axis value?
View 6 Replies View RelatedI need to create a graph with a 2 x axis and a single y axis. For example:
Pressure ( PSIA) Solubility (mol %) Velocity (m/s)
200 0.024 1
300 0.036 1.2
400 0.041 1.8
I need the two x axis to be pressure and solubility and the y axis to be velocity, with the data being demonstrated by a single plot (I have only managed it with two plots which does not demonstrate solubility's relationship to pressure ).
For example at a pressure of 200 PSIA (lower x-axis) and solubility of 0.024 mol % (upper x-axis) velocity was found to be 1 m/s.
I am trying to reproduce a graph similar to this: [URL] ....
How to get the Y axis in the center and two distinct bar charts on either side.
Sample data can be found here: [URL] ....
how to incorporate another category and value axis to my existing chart.
1. I need to add a rank axis derived from my data column (C6-C15). This column should rank from highest to lowest and create a tie if any number is repeated. I have arranged the rank column in cells B38:L38 as they would appear. I would like this to appear on the top or bottom of the bar graphs.
2. Second I need to add the frequency of hits which = 3 derived from cell J1 This should appear on the chart were it is currently titled. This should create another bar graph colored green and labeled 3.
3. Lastly the numbers axis can remain the same as it appears on the chart or if it would be better to align as shown in cells B43:L43.
What is the best way to have both horizontal and vertical axis as value axis?
View 2 Replies View RelatedI have a data set that is a spectrum of (y)intensity vs (x)energy I was wanting to add an additional X axis at the top of the graph showing the wavelength conversion for the energy value, is that possible in excel? and if so how?
View 1 Replies View Relatedhow do you create a graph with a field such as vendors on the X-axis, but with dollar values spent on the left side of the y-axis and percentage of total dollars spent on the right side vertical axis?
View 3 Replies View RelatedIn a single column of random numbers how do I count the interval since the last occurrence of that unique number?
View 9 Replies View RelatedI would like to add a vertical axis to the right of my plot that looks exactly the same as the left axis. The only way I found to do this is to add a secondary axis. However this axis is based on a data series and it does not match the left axis.
How can I make the left and right vertical axis look the same.
Any way to get the values in a chart/graph by putting an specific X axis value.
E.g. There is relation between Gauge height and Flow
GaugeFlow
0.30500.320.100220.3413880.275390.3813470.855280.4017081.322240.4137521.692480.4333542
.468280.4529963.431060.4823795.30220.5115577.774290.5229628.94510.56120913.535920.58917.68
If I draw the curve with Flow on X-axis and Gage on Y-axis and then want to know the flow at Gage 0.53m.
OR
By putting flow value to know Gage height.
I have geological readings "W,X,Y & Z". For every drilled hole I have these readings recorded for individual intervals (i.e. 1-2m, 2-3m, etc.)
However, the intervals have now been grouped together based on other (unlisted) specifications.
Now I am tasked with averaging these readings "W,X,Y & Z" for the decided groupings. For example.... if intervals 1-4m have been grouped for the first hole, what is the average reading of "W,X,Y & Z" over this new interval?
I have attached a file which displays the layout of the spread. To the left is the original data, and in columns I:K are the new 'groupings' of intervals. Ideally, I would like to generate the average table to the right of the original data (highlighted in green).
So basically, I need some vba code to average the readings in the 1st table conditionally to correspond with the grouped intervals in the 2nd table.