I have an object in a form and I need to get the name of the object from cell value or I need to declare it using Dim statement..
something like this..
NAcctF.Visible = False
where I need to declare like this..
itm= range("A1").value & "F"
itm.Visible = False
because, except "F" at last remaining part keep changing..
I am trying to find particular text in a cell then format adjacent cells in the same row. In my code below I am trying to search for "*[Tx]*" using Like, however this is formatting all text that contain "T".
View 7 Replies View RelatedDoes the object in a 'With' have to be an object or can it be a variable containing the name of an object.
I want to carry out the same series of settings on a number of objects
and propose to define a Sub and pass the name of the objects as a parameter.
I then want to use a 'With' to set that object.
i.e. as shown below - though I cant see how it would work.
' combobox objects called Staff, Maker, etc
Call Setuplist("Staff")
Call Setuplist("Maker")
...
Private Sub Setuplist(whatlist As String)
'some complex filtering and sorting goes here
...
Set rnData = ActiveSheet.Range(whatlist+"List")
vaData = rnData.Value
With Me+whatlist ' this is the bit I cant fathom
.
.
End With
End Sub
I know that we should declare all variables at the beginning of a subroutine, in fact I'm told it's good practice to use Option explicit to 'force' variables to be declared, my question is why?
If I don't declare a variable the routine still seems to work OK so what is the downside of not declaring them upfront? Is it just for neatness or common practice or is there another reason?
As a rule which variables should I declare?
Sub checkPO()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Application.EnableEvents = False
Dim Rng As Range, MainSheet As Worksheet, item As Variant ', CurrWidth As Integer, UnitWidth As Integer
Set MainSheet = Sheets("Orders To Chase")
Set Rng = MainSheet.Range("B5", MainSheet.Range("B60000").End(xlUp))
totalqueries = MainSheet.Range("B5", MainSheet.Range("B60000").End(xlUp)).Cells.Count
UnitWidth = 282 / totalqueries
With progbar '\displays the please wait box
.Show False
.prog.Width = 0 '\ updates progress bar
.Repaint
End With
If I declare the variable my progress bar goes off screen. remove it and its back to within its box.
I haven't declared any of these variables either. Does this matter?
POnum = .Range("G5").Value
Supplier = .Range("A5").Value
Req = .Range("B5").Value
Ordered = .Range("E5").Value
what does the symbol # means in VBA? (but I couldn't put the # in the subject of my message )
I'm trying to understand someone's code... at some point he wrote:
sum_LU_Area = 0#
I thought that the # was used to declare a constant but I'm not too sure because in his code earlier he declared
Public sum_LU_Area As Double
Beside, sum_LU_Area is calculated somewhere further in the program.
Why it seems not possible to declare variables in Class modules like so:
[Code] ....
I am running into the error, "Procedure too large". I know I need to break the range down into Arrays, so how can I hard code the values into an array? I cannot find an example to follow. Ranges: D:E,K:L,O:P,....etc. I know I can break the rows up into an array too, but one thing at a time. Here is an example of the range for D:E.
View 2 Replies View RelatedI have a column a1:A150 which includes some Data. I now want to declare these data as an array.
Afterwards I want from cell b50 to copy int the value from cell a1 and copying the next value from the array (cell a2) into cell b51 and so on until cell b200.
I want to do it by creating an array and not just by usual Excel formulas.
I want to declare and 'Set' a number of worksheets for later use. Like this ...
View 9 Replies View RelatedI'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View Relatedi need to set the range of variables that user can add to the range.
For Example:
AA_*
BB_*
CC_*
ABCD_*
so we accept variables STARTING with AA_ OR BB_ OR CC_ OR ABCD_. If the user enters sth else, then I want to disable the "Enter" key. (If the Cell is Empty than it is also OK!!)
If disabling the Enter key is not possible then maybe i can use Conditioning Formatting? But the question is then if i can use for single condition OR statement.
I need to create an array with a variable as it size For instance:
View 2 Replies View RelatedI am trying to declare lngLr as Long and Constant. But it's buggin out on me. Is this the correct way to do it?
Code:
Private Const lngLr As Long = ".Cells(Rows.Count, 1).End(xlUp).Row"
Sub calculate_active_employees_sheet_years_of_service_w_Oasis()
Application.ScreenUpdating = True
[Code].....
how to declare&initialize a variable as Global in vba?
I have a variable ,
listGroup=Array("aaa","bbb","ccc")
now i am using this variable for 3 different functions. so what i am doing is wrote the same code to 3 functions, so how i can declare&initialize this variable as global and access to all functions.
is it possible to declare an array or anyother datatype like the following in VBA?
Dim myArray() As Integer
myArray("A") = 0
myArray("Test") = 0
myArray("G") = 0
after checking some conditions i need to change the corresponding values too, like the following,
If mycondition = True Then
myArray("Test") = 1
End If
I need to declare a global variable in Application level not Module level.
I have declare a variable in Module1 and then Module2 with same name then complile it and get success. That means there has two variable with same name in different Module. I think this was not a proper global variable declaration by which I can allow to declare only one variable in all Module, Class every where. I have used code as below -
I need to declare a two dimensional array that will return the Row and the cell's string value. My only solution is to return the row as a string like this.
Public GlobalArray(2, 100) As String
How to get more control than this? Maybe I should just declare it as a variant but this might open it up for problems later.
I'm fairly new to VBA and I need to define a variable as a date range
i.e. Period1 = 1Apr2006 to 29Apr2006, Period2= 30Apr2006 to 27May2006 etc
How do I declare a const array of string type in VBA? for example I want to say
Const myStringArray(4) as String = string1, string2, string3, string4
I'm getting the following error:
"Object library invalid or contains references to object definitions that could not be found"
I wasn't getting that error last night and I'm not sure what I may have done to cause this error.
It seems to be cause by code running on one sheet of my workbook, but I'm not really sure about that. I'm still a bit of a novice at VBA.
I'm using Excel 2002 SP3 and I'm running MS XP Home as my OS.
Do you have any ideas what can cause this error and/or how to trace down the offending objects/code?
I have a series of operations to carry out and, while I can do the code for each individual one, how to declare the variables correctly and have the operations done in a series of Do/ Loops or For/Nexts. Especially the declaring of named ranges as variables. Also a bit uncertain of the best way to find and coy the match. I have attached a simplified version of the workbook, with explanations on it.
Basically what I need to do is loop through a series of named ranges and then loop through the names in each, match each name with a name in a master list (with a flag as an image), add an e-mail hyperlink to that flagged name and copy both to a new cell.
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
Not sure of best way for this.If cell G10 has value show object1, if cell G10 has no value show object 2 ?
View 7 Replies View RelatedEvery time I copy and paste a small object "jpg" or "png" into a cell it defauts in the cell to the left and top edge s of the cell. I would like the object to be centered in the cell. I can drag the object to "Close to Center", but I have green and red go/no go dots in 120 cell going downward I would would really like to see them aligned.
View 7 Replies View RelatedConvert object values to cell values!-requirement
i need to convert the values present in the drawing objects like "Rectangle" to cell value.
Eg:
A rectangle say "Rectangle 150" is having a value as "Customer name". Now i need to get this value in normal cell in the worksheet.
Could you program an example where the object size (arrow) is linked to a cell value?
I dont understand how this event works.
I want a certain object to change colour when a certain cell = something.
I have 2 equation objects created with microsoft equation 3.0. I have named the equation objects Eqn9 and Eqn10. I also have an if function, what i would like to do is if a number in cell AC58 is greater than 0.3 a macro runs and hides Eqn9 and shows Eqn10, similarly if the number in cell Ac58 is less than or equal to 0.3 the macro hides Eqn 10 and shows Eqn9.
View 8 Replies View RelatedI have a piece of clip art in a cell (that moves around in the right cell when i filter/sort the data). i need to know how to select/activate the cell that a piece of clip art housed in. is there a way to say at the beginning of the macro to select the cell behind the picture?
Macro works by offsetting a few cells to the left and pulling the name of the item in that row and then going to another worksheet that is named the same thing as what is in the cell i offset to. If i click on the cell behind the picture first then it works but if i have a diff cell activated when i click the picture it of course doesnt work - so all i need is a way to activate the cell behind the picture.