I am trying to find particular text in a cell then format adjacent cells in the same row. In my code below I am trying to search for "*[Tx]*" using Like, however this is formatting all text that contain "T".
View 7 RepliesI have an object in a form and I need to get the name of the object from cell value or I need to declare it using Dim statement..
something like this..
NAcctF.Visible = False
where I need to declare like this..
itm= range("A1").value & "F"
itm.Visible = False
because, except "F" at last remaining part keep changing..
I have a text box within a chart tab which is populated with text values from a worksheet within the workbook. That part works fine however i want to be able to achieve the following example:
Current Text: Component Name - Notes
if there are notes against the component name i want the name to remain in black and the notes to change to blue
Aim: Component Name - Notes
If there arn't any notes then for the component name and the "-" to change to a light shade of grey
Aim: Component Name -
There are 26 components, each on their own lines in the textbox so im thinking either a loop where the cell reference is variable eg. ("CY" & i) or using the .find with a variable.
My code so far is:
Code:
Sub Chart_Notes_NTCA()
Dim i As Long, j As Long, Counted As Long, Total As Long
Dim Ans As String, Notes As String
Dim Cht As Chart
[Code].....
I have been given a huge membership list. The field for the CITY also as the two letter state abbreviation (e.g., "Fremont, CA" instead of just "Fremont".). I want to be able to have the "CA" or "WA" or "NV" (etc) from the city field appear in a new STATE field. I successfully use the below statement to do this with the "CA" but I want a statement that will search for multiple strings (the other states).
Here is what works now: =IF(FIND(" CA",F2),"CA"). But I want to be able to add other state abbreviations to this.
formula to find specific text from statement.
I manage to use formula find for 1 text in 1 statement, but in confuse how to get another text found if i have "8 text" to find. Generally, there will only be "1 text" for each statement.
Maybe in 1 statement there have only "IC" or "Staff Tagging" or Name" or "Product" or etc till 8.
I've a spreadsheet and I need to find cells in Column A that contains certain text and subsequently being able to compare the data in 2 other cells (column F and Column J) and post the results of comparison in Column L. Please see the tables below:
In this table, if Range("A1") contains abc, then data in Range("f1") would be compared against Range("J1"). If F1 = J1, then Range("L1") would say "ok" otherwise "needs to check" as in Rows 2.
Please note that the amount of data varies daily.
ColumnA
Column F
ColumnJ
Column L
abc
fff
fff
ok
abc
fff
ggg
needs to check
bbb
fff
fff
Does the object in a 'With' have to be an object or can it be a variable containing the name of an object.
I want to carry out the same series of settings on a number of objects
and propose to define a Sub and pass the name of the objects as a parameter.
I then want to use a 'With' to set that object.
i.e. as shown below - though I cant see how it would work.
' combobox objects called Staff, Maker, etc
Call Setuplist("Staff")
Call Setuplist("Maker")
...
Private Sub Setuplist(whatlist As String)
'some complex filtering and sorting goes here
...
Set rnData = ActiveSheet.Range(whatlist+"List")
vaData = rnData.Value
With Me+whatlist ' this is the bit I cant fathom
.
.
End With
End Sub
I do construction work, and to save on record-keeping, I'm trying to autopopulate a "summary" excel table by only filling out my "accounting" table. I made a sample table, and I'm having a hard time linking it.
For instance, I fill in rows 2 through 9 of the accounting table. Then on the next tab, The concrete section automatically grabbed rows 2 and 8. What I can't figure out, is how to get the summary table to autopopulate without leaving blank rows for rows 3 through 7.
I need a statement to look at how many words are in a cell. If there is 4, to return "Stem" to another column, if it's the 5th word or higher then to return the last word in the string.
For Example
Column A.......................................................... .Column B
SOME-TEXT-GOES-HERE....................................../...STEM
SOME-TEXT-GOES-HERE-SOMEMORETEXT.............../...SOMEMORETEXT
SOME-TEXT-GOES-HERE-SOMEMORETEXT-AGAIN...../...AGAIN
I have tried but failed miserably! I though of using a lookup statement but due to the number of variations it would be quite time consuming.
I want to search for a word in column A and when I find it I want to copy it to column B.
Column A is a description that can be 6 or 7 words long. Column B is a single word.
Example:
Col A
Engine Kit, V-8, 306, forged.
I need to copy the word Kit to column B.
I have 2 columns of figures. One column has a defined name of 'Estimated Value' and the other column 'Actual Value'
My IF statement should simply read "=If(Estimate>Actual,Text color RED, Text Color Black)
My attempts at finding the code for the True/False statements are legion and 'Conditional Formatting' does not appear to work
1) i have office 2003 on a laptop. within powerpoint, i can create a 'microsoft excel chart 11' object. to create a link to the excel data source, do i have to go through the odbc sql setup? it works, but i don't want my powerpoint to be dependent on some excel file somewhere. what are the other options to insert/make a functional pivot chart in powerpoint with the data also within powerpoint? the data as sheet option does not result in the chart being a pivot, it's just a plain chart. it has to be a proper object, not an image paste or a chart that updates links with the excel file open.
2) i have office 2007 on my other laptop. i can not find any suitable object to choose from to make a pivot chart in powerpoint. what's the best way to go about in 2007 version?
3) am i going about this the wrong way with the objects? should i be after vba code?
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies View RelatedI am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I am trying to write a formula that will return a statement if a certain month is contained in the text within another cell. Formula is =IF(ISERROR(SEARCH("Dec",Assumptions!B2)),"Ensure Journal is Non Reversing","")
Cell B2 contains a date in the format of Dec 08, so if this date contains Dec, then return "Ensure Journal is Non Reversing", if it doesn't then leave the cell blank.
At the moment it is putting in the first test for every month I select and not changing to blank.
the AND part of the statement tells the cell to see if 4 cells are all <-10 then do its thing that part works what i need now is if that has happened then do not do the next 3 cells
View 2 Replies View RelatedI need to sum cells that contain this formula: =if($c$5=0,"",c5*b5). I am getting a wrong data type value error.
View 7 Replies View RelatedThe word " Total" can exist in any row only in Column A. How can I find the cells that are in the same row as the word "Total" are in. Also, the word "Total" can exist more than once in Column A.
View 5 Replies View RelatedGot a question regarding the Range. Find function. I'm using it to search within the customer workbook, but while testing, I found something weird. Lemme give you an example:
This is my search code (please note, French version of Excel 2007, thus Feuil1 = Sheet1, and last row is 1048576) :
strName = Feuil1.Range("D13")
OpenFile ("Clients")
With Worksheets(1).Range("A1:A1048576")
Set SRange = .Find(strName, LookIn:=xlValues)
If Not SRange Is Nothing Then
CloseFile ("Clients")
FillCustomerInfo (strName)
Application. ScreenUpdating = True
Exit Sub
Else
Feuil1.Range("D15:D17") = " "
AjoutClient.Show
End If
End With.......................
I'm working on a macro that requires me to loop through a column and stop every time the cell has underlined text. My code currently looks like this:
For i = 1 To 5
If cells(i,1).font.underline = xlunderlinestylesingle Then
strUnderlineText = Cells(i,1)
End If
Next i
I need to find a specific text in column D of sheet2 of my worksheet and copy that row to sheet1 to the last blank cell in column B. The macro should continue to search for the next text and copy rows only if there is active cells in the range column A : C of sheet2. I need a VBA code to do this.
View 5 Replies View RelatedFinding any specified Text like "Cube" down a specified Column in this case "D" when Text has been found
Copy the 24 cells directly below and Then Paste to G1.
I have two lists of data as below, and I want to find a match after excluding "Ltd" or "Limited"
example
If Cell A1 is "ABC Limited", and Cell B1 is "ABC Ltd"
This should show as a "match", otherwise it should show error.
I need to find cells containing text (Alpha characters only) in a single column, an return the row(+1 then -1). The column contains Group names (Unknown) , and under each name follows numeric data until the next group name. The cells are not formatted other than BOLD names. I need to exctract the numeric data in groups.
EG.
----
NameA
324
234
65
NameB
345
67
Footer
----
etc.
I have manged using the following code, but this always assumes there is an "e" in the name, but would prefer a more foolproof method. (I used "e" cos it is ok so far, BUT this could change in the future)
Sc = "A"
Sr = "1"
With Worksheets(1).Range(Sc & Sr & ":A500").................
How do you use the Application.CommandBars in the CommandBar Object to find a button.
View 1 Replies View RelatedThis was my attempt, it says 'Object required'
Private Sub Worksheet_BeforedoubleClick(ByVal Target As Range, cancel As Boolean)
If Target.Column = 16 Then
Select Case Mid(Target.Text, 1, Worksheet.Function.Find("to", Target.Text, 1) - 2)
Case "CAS"
MsgBox ("Cashiers")
Is there a way to find the embedded chart object name?
View 9 Replies View RelatedI know there is something I am missing here and I can't really find the solution I need in past threads. I have a macro that calls about three macros in a row, then once it has done those tasks, I want it to show a particular userform using the userform.show statement. However, when it comes to show the userform I get an error saying that it cannot find the specified object? This is quite frustrating and I think I fixed it in another part a while ago, but I can't remember how.
View 2 Replies View RelatedI have a code that runs when I open the workbook. It asks if this is a new quote, if it is it should then open userform1. The problem is that sometimes when I click yes I get a "Path/File access error" popup, and then a VBA error box with "Run-time error '75' Could not find the specified object".
When i debug, it highlights the line "userform1.show"
IF i end, and then run it from within VBA it will then run fine.
Sometimes when I open the workbook it will just crash excel, and when I reopen it, it runs fine.
Simple code -
Sub Workbook_Open()
answer = MsgBox("Is this a new quote?", vbYesNo)
If answer = vbNo Then
Else
userform1.show
End If
End Sub
I want to create a macro that will find a text string called "Season Average" in the entire workbook and delete a range of cells above it 4 cells longs starting right above the text and then going left.
Example is if "Season Average" is in cell D11, than I want the cells D10, C10, B10 & A10 Deleted and the cells to shift up
This happens throughout the entire workbook and multiple times on each work sheet in different spots not consistently same cells.