Delete Cell Contents Based On Color

Feb 14, 2008

I am using conditional formatting to apply a light green color (index number 35).
Is there a macro that can delete the cell contents of the cells with this formatting in col K and L?

View 9 Replies


ADVERTISEMENT

Automatically Color Coding Based On Cell Contents

Jan 28, 2013

I would like to automatically color the fill of a cell based on the cell contents.

For example, if the cell content is "1" I would like the color of the cell to be cyan and if the cell content is "2" I would like the color the cell to be red.

I've tinkered with several different formulas but I just can't get anything to work.'

View 2 Replies View Related

Delete Rows Based On Cell Contents

Aug 29, 2007

I have merged two workbooks into one. What I need to do at this point is to delete all rows that have a duplicate entry, basically anytime the cell content in one cell matches the cell content in the cell right below or above it, BOTH rows should be deleted. At this point, this is above my VBA skills so I'm asking for help in how to do this. The stripped version of the workbook is attached (only 100 rows) but in reality this is a huge workbook with almost 22,000 rows.

You will notice in the attached workbook, that cell contents for A2 and A3 match. For what I need to do, I need both rows (2 and 3) to be deleted. If you go down a bit, starting in row 89 all the contents in column A are unique so those need to remain.

View 3 Replies View Related

Adding Color And A Value To A Cell Based On Contents In Another Cell

Apr 28, 2014

I have values in a number of cells. Next to them, if there was a value, regardless of what the value is, except blank or zero, i would like the cell to turn blue and if possible have a 1 in the cell.

I've used the conditional formatting, however, among the options, 'less than' is the closest to to getting the color right. The issue is that if the cell has nothing in it, it still colors the corresponding cell blue; because it is not less than the already blank cell. If it is blank, I don't want it to color the cell.

View 1 Replies View Related

Delete Contents Of A Cell Based On Char Count

Jul 23, 2008

I have this forumala.

=RIGHT(A1,MIN(500,LEN(A1)))

I would like to apply this formula to VBA and call to existing macro so that this is applied to all the cells in Col. A. How can I do that? Or, is there a better way to do it?

Buttom line, I'd like to see only the last 500 characters per cells in Col. A after I run the macro.

View 9 Replies View Related

Delete Entire Row Based On A Cell Color

Mar 9, 2007

I used this macro to find the duplicates in column B:

Sub KryDups()
ScreenUpdating = False
FirstItem = ActiveCell.Value
SecondItem = ActiveCell. Offset(1, 0).Value
Offsetcount = 1
Do While ActiveCell <> ""
If FirstItem = SecondItem Then
ActiveCell.Offset(Offsetcount, 0).Interior.Color = RGB(255, 0, 0)
Offsetcount = Offsetcount + 1
SecondItem = ActiveCell.Offset(Offsetcount, 0).Value
Else
ActiveCell.Offset(Offsetcount, 0).Select
FirstItem = ActiveCell.Value
SecondItem = ActiveCell.Offset(1, 0).Value
Offsetcount = 1
End If
Loop
ScreenUpdating = True
End Sub

The duplucate cells are now red in color. (RGB(255, 0, 0)). How do I now code VB to delete the rows in column B where the cell color is red? Here is some of the code that I tried:................

View 5 Replies View Related

Macro Delete Row Based On Color And Adjacent Cell?

Mar 28, 2014

i am looking macro formula to delete row with 2 criteria :

- delete rows if yellow color background and based on adjacent cell (blank cell), otherwise keep rows when adjacent cell not blank

View 8 Replies View Related

Delete Columns And Rows Based On Cell Fill Color

Jan 31, 2014

I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.

Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.

View 2 Replies View Related

Delete Row Based On Red Color Font?

Feb 2, 2014

i have problem to delete row based on red color font (without bold), for example :

input :
title1 george
title3 mike
title4 zidan

output :
title4 zidan

View 4 Replies View Related

Delete Rows Based On Fill Color

Aug 21, 2008

i found a link to my problem in the subject title below,

http://www.ozgrid.com/forum/showthre...t=45580&page=2

The guy at the end of the post says he got it working in the end, but no one seems to have posted the final solution - could someone tell me if the solution is actually in the thread, and if so where!

My problem is outlined by this guy - basically i want to be able to delete rows in a range that have no fill color, and so keep the ones that are colored.

View 9 Replies View Related

Delete Cells Based On Fill Color

Mar 11, 2008

how to sum/count cells based on background color [url]

how to delete cells based on background color?

View 3 Replies View Related

DELETE CONTENTS If There Is Nothing In The Cell

Mar 14, 2008

What I need to do is starting at cell E251 of the Cheque Logging Sheet I need the code to check the cell for any contents and if there is nothing in the cell then DELETE THE CONTENTS then move to cell E250 and do the same all the way up to E2

My ACCESS problem is that even if the cells in Column E contain nothing the only way that I can upload the spreadsheet to Access is by deleting the contents of the empty cells. Currently I am doing this manually but I would rather sit back and have VBA do it for me...

View 9 Replies View Related

Return Contents Of 1 Cell Based On Contents Of Another Cell?

Mar 12, 2014

I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.

View 3 Replies View Related

Formula To Delete Cell Contents After Use

Feb 28, 2007

I need a formula that would scan a given column for data, get the first available data from the first available cell ( D1 ), perform computation, input result in a different cell ( A1 ) and then delete the contents of D1 and move on the D2 and so on till end of data. So far I have been able to have the result in A1 but could not achieve the deletion of D1 contents. The purpose is to prevent the formula from scanning the data column from D1 again. In this way, the datawould be made available in one column and when the data have been processed the column would be empty and the result would be in another column.

View 2 Replies View Related

Conditional Formatting - Cell Color Based On Range Of Cell Color

Aug 9, 2013

Summary of performance of various products against target is as follows,

Product vs Target
Color Code
Result

CH4OH
Green
1.0

[Code] ........

I need the final result automated as follows,

If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red

Is there a way to automate this?

View 8 Replies View Related

Color Cell Fonts Based On Text Color Of TextBox Controls On UserForm

Apr 11, 2008

I have got a userform with lots of controls,

One of the action's on a large group of the controls is the same but except for one number

here is an example

If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3

This makes a cell that correlates to the textbox red if the text in the textbox is red.

Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.

Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?

View 3 Replies View Related

Setting Color Of Range Based On Adjacent Cell Color

Nov 1, 2009

This is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.

I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.

The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.

What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.

Here is the code I am using to set the color of the cells in Column A:

View 7 Replies View Related

Change Font Color Based On Adjacent Cell Color

Apr 18, 2008

I have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.

View 3 Replies View Related

Delete Contents Of Cell If Text Is Present?

Feb 13, 2014

Need to search a sheet and find cells that contain the text "Requirement". If found then i want that cell to become blank.

example
so in sheet1,

i have a number of columns and a number of rows

in cell A3 the value is - " there are requirements"
in cell F23, the value is -"the Requirement is"

since both cells have the word requirement, I want these cells to become blank.

View 1 Replies View Related

Delete Contents Of Cell If Text Is NOT Present

Feb 19, 2014

Need to search a sheet and find cells that contain the text "."

Want all cells that don't contain a "." (dot) to be erased from the sheet

Example : so in sheet1,

I have a number of columns and a number of rows

in cell A3 the value is - " there are requirements."
in cell F23, the value is -"the Requirement is."

since both cells have "." ( dot) , I want these cells to remain in the sheet, but the rest of the cells should become blank.

View 3 Replies View Related

Delete Entire Row Depending On The Contents Of A Cell

Jan 20, 2009

I'm trying to write a procedure which will search the contents of Column B of my worksheet for the word "Total". Whenever the word "Total" is found in a cell within Column B, the entire row should be deleted.

View 5 Replies View Related

Move Cell Contents & Delete Rows

May 23, 2006

I have a spreadsheet with a serial number is row 1 in column A with the rest of Row 1 empty. Column A is empty in Row 2, but has the data associated with the row above in columns B through L of Row 2. Then comes 2 blank rows and the pattern repeats with a new serial number in column A of row 5 and so on. I would like to move the serial number down one row, delete the now empty first row, delete the following 2 empty rows, and then loop to do the same thing again for all 9000 rows of the spreadsheet.

View 2 Replies View Related

Color Fonts In Column G Based On Contents In Column E

Jan 21, 2009

I have created an Excel spreadsheet teachers schedule for a small school with 8 teachers. I have assigned a number to each teacher (1 - 8) so that a number typed in a cell in Column E will cause a teachers name to appear in a cell in Column G. The ranges are E3:E20 and G3:G20. I hope to find a Macro that will display each teachers name in a different color.

View 5 Replies View Related

Excel 2010 :: Delete Cell Contents If Cell Contains Numerical Value?

Oct 8, 2013

Recently I have been practising writing my own macros in VBA. I am using Excel 2010.

I have been trying to write a macro to look at two columns in a worksheet (say, columns D and E) and to delete the contents (not the formatting, and I don't want to delete the cell itself) of that cell only if it contains a numerical value (e.g. 1, 2, 256 or any other number). If it finds a cell with letters, then it wouldn't delete the contents of the cell. The cells are currently formatted as "currency" cells.

I have been trying all sorts of things and I just can't get it to work. I can write a macro to clear a range easy enough, but I am stuck on getting it to delete the right stuff. I won't embarrass myself by uploading the code that I have been using..

View 7 Replies View Related

Change Text Color Based On Cell Color

Oct 17, 2006

I have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.

i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?

View 5 Replies View Related

Color Cells Based On Color Of Preceeding Cell

Nov 18, 2007

I am looking for a very simple script that will achieve the following:

On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:

From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.

View 5 Replies View Related

Delete The Contents Of Every Cell Without Deleting Any Code From My Module

Apr 16, 2009

I want to delete the contents of every cell without deleting any code from my module. The reason I ask is, I'm reading from a text file into excel.

I want to run my code to read text into excel one time through. Then i want to delete all the text, make some alterations to my code, and run the code again. That way each time the worksheet is fresh and clear before i run the code.

View 4 Replies View Related

Get A Cell To Look At A Row Based On Contents

Dec 24, 2008

I want to have a cell that looks at another cell based on a number that is in another cell. So imagine if you will: A1 contains the number 25. A2 contains the formula I can't work out. I want it to look at the row that is the number contained in cell A1, so in this case it would look at row 25.

Now I want to narrow it down further to a cell in that row but this will be a constant so lets say column F. So if A1=25 then A2 would display what ever is in F25. If cell A1 were 16 it would display the contents of F16 etc. The best I got was something like =IF(A1=>1,(F(A1))) but obviously that is wrong as it doesn't work.

View 2 Replies View Related

Add Row Based On Cell Contents

Apr 25, 2006

I want to add a row underneath a row if the value in the in B cell is not = "". Then i want to write a value in the C cell of the new row.

View 2 Replies View Related

Workaround For Public Variable Bug: Creates Different Cell Colors Based Upon The Cell Contents

Oct 15, 2008

I am in the process of reformatting an excel workbook to act as a review tool for different factors in a process. Part of my redesign includes the use of coding that creates different cell colors based upon the cell contents. The new workbooks will be used to handle existing data for this year. I have developed a process macro to open an existing workbook and copy and transfer the original data worksheet into the newly formatted workbook. The data gets transferred to the new worksheet and the resulting workbook is renamed and saved, Heres'' the rub... the newly saved workbook is missing all of the coding for the worksheets... apparently this is a MS bug.

Has anyone figured a workaround for this. One thought I had is to open both( new and old )workbooks and rather than move/copy , i would transfer the data using cell references.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved