Recently I have been practising writing my own macros in VBA. I am using Excel 2010.
I have been trying to write a macro to look at two columns in a worksheet (say, columns D and E) and to delete the contents (not the formatting, and I don't want to delete the cell itself) of that cell only if it contains a numerical value (e.g. 1, 2, 256 or any other number). If it finds a cell with letters, then it wouldn't delete the contents of the cell. The cells are currently formatted as "currency" cells.
I have been trying all sorts of things and I just can't get it to work. I can write a macro to clear a range easy enough, but I am stuck on getting it to delete the right stuff. I won't embarrass myself by uploading the code that I have been using..
How, via VBA, would I add a comment from a userform (text box name: txtReason) into a cell that may already have a comment in it? I would like to keep the comment that is in the cell and then have the program add a "/" and the next comment from txtReason..
However, I am trying to use the same macro on several different tabs in the same EXCEL worksheet. Obviously, I can't have the tab name in the macro. But, I don't get a title at all when I try to remove it like this...
ActiveChart.ChartTitle.Select Selection.Caption = "=R2C1" or ActiveChart.ChartTitle.Select Selection.Caption = "=A2"
Is this possible? I am (kinda new at) using EXCEL2010.
I'm using excel 2010 and windows XP with a moderate amount of experience tinkering with macro programming. I know what I need is very doable but I can't get my head around what the code would look like. I must not be wording my searches correctly because most of what I'm getting for results are iterative programs based on a cells value which isn't what I need.
I'm trying to build a macro that will check a cell (C3) and based on the contents of that cell copy a column (I) to one of 12 different columns (K:V). So if the value in C3 is 1 it should copy I to K, if the value is 2 it should copy I to L, and so on.
Some of my worksheets are permission protected. They will allow me only to view the sheets - No editing, copy, cut, sort, add filter, etc. Is there a way to hack this and copy data (including formating) into other / new worksheets?
I have excel 2010. I have a worksheet with formulas that refer to a labelled cell, and I want to change the location that they refer to. When I select the name in the Name Box and delete it or type another name it has no effect on the name of the cell.
I came across this excellent code here on this site but it does the opposite of what I need. This code deletes empty or blank rows if the cell in column I is blank. I actually need to delete the row if the cell in column I has a date or any data. Using Excel 2010.
Sub deleteBlankRows() On Error Resume Next Columns("I").SpecialCells(xlCellTypeBlanks).EntireRow.Delete End Sub
I'm using Excel 2010). I have column I, which is the sum of columns A and B (first and last names of patrons), and I have used conditional formatting to identify all duplicates in column I with red text. I would now like a macro to find red text in column I and then delete the corresponding rows.
I've been looking around on the web for a while and have cobbled together this code stolen from other people's macros:
[Code] ....
When I run it, I get the following error:
Run-time error '1004':Application-defined or object-defined error
Excel doc is called "stupid mailing list.xlsm", sheet I want to run the macro on is called "voters".
I have a massive spreadsheet (ca.110 000 rows [excel 2010). I need to cut this monster by deleting all the cells that do not have a certain cell value within them.
Say that in my column A there are different entries (text type). I would like to delete the ones that do not match the following criteria:
"mytextascriteria*", where * somehow stands for the rest of the string.
Strictly speaking I can only determine beggining of the string I want to perserve but the values at the end of that string are changing.
I found the thread about deleting entire row based on a cell value here: Delete entire row based on one cell?
but I couldn't quite work out how to apply it in my scenario....
Otherwise is completely pointless to do it manualy with these amout of records.
What I need to do is starting at cell E251 of the Cheque Logging Sheet I need the code to check the cell for any contents and if there is nothing in the cell then DELETE THE CONTENTS then move to cell E250 and do the same all the way up to E2
My ACCESS problem is that even if the cells in Column E contain nothing the only way that I can upload the spreadsheet to Access is by deleting the contents of the empty cells. Currently I am doing this manually but I would rather sit back and have VBA do it for me...
I have the following columns that return cover period dates.
Start of Cover PeriodEnd of Cover Period01-Nov-0631-Jan-0701-Jul-0831-May-0901-Dec-0930-Jun-1001-Jan-1131-Dec-10
I however need a macro that will delete the cell contents if the "Start of Cover Period" (column AK) date is > than the "End of cover period" (column AL) date.
Thus it must compare ak2 with al2 and if ak2>al2 then clear both cells. if AK2
I need a formula that would scan a given column for data, get the first available data from the first available cell ( D1 ), perform computation, input result in a different cell ( A1 ) and then delete the contents of D1 and move on the D2 and so on till end of data. So far I have been able to have the result in A1 but could not achieve the deletion of D1 contents. The purpose is to prevent the formula from scanning the data column from D1 again. In this way, the datawould be made available in one column and when the data have been processed the column would be empty and the result would be in another column.
I'm having issues with Excel's 2010 conditional formatting. Seems easy to use, but I'm trying to highlight values based on 2 columns of numerical data. Example:
Column F: 6 6 14
Column L: 3 NA 17
I would like Column L to highlight values that are greater than Column F in green. If they are less than Column L then highlight them in red.
Seems I was able to do this with Excel 2003, but I don't understand the 2010 version.
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I'm trying to write a procedure which will search the contents of Column B of my worksheet for the word "Total". Whenever the word "Total" is found in a cell within Column B, the entire row should be deleted.
I am using conditional formatting to apply a light green color (index number 35). Is there a macro that can delete the cell contents of the cells with this formatting in col K and L?
I have a spreadsheet with a serial number is row 1 in column A with the rest of Row 1 empty. Column A is empty in Row 2, but has the data associated with the row above in columns B through L of Row 2. Then comes 2 blank rows and the pattern repeats with a new serial number in column A of row 5 and so on. I would like to move the serial number down one row, delete the now empty first row, delete the following 2 empty rows, and then loop to do the same thing again for all 9000 rows of the spreadsheet.
I have merged two workbooks into one. What I need to do at this point is to delete all rows that have a duplicate entry, basically anytime the cell content in one cell matches the cell content in the cell right below or above it, BOTH rows should be deleted. At this point, this is above my VBA skills so I'm asking for help in how to do this. The stripped version of the workbook is attached (only 100 rows) but in reality this is a huge workbook with almost 22,000 rows.
You will notice in the attached workbook, that cell contents for A2 and A3 match. For what I need to do, I need both rows (2 and 3) to be deleted. If you go down a bit, starting in row 89 all the contents in column A are unique so those need to remain.
I want to delete the contents of every cell without deleting any code from my module. The reason I ask is, I'm reading from a text file into excel.
I want to run my code to read text into excel one time through. Then i want to delete all the text, make some alterations to my code, and run the code again. That way each time the worksheet is fresh and clear before i run the code.
I would like to apply this formula to VBA and call to existing macro so that this is applied to all the cells in Col. A. How can I do that? Or, is there a better way to do it?
Buttom line, I'd like to see only the last 500 characters per cells in Col. A after I run the macro.
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001 q9002 q9003 q9004 q9005 q9006 etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due. Column C is when bi-weekly inspection is due. Column D is when monthly inspection is due. Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1 B1 C1 D1 E1
Inspection Date Weeekly Due Bi-WeeklyDue Monthly Due 6 Monthly Due
January 1 2013 Change red Jan 8 & return blank Jan 10 Change red Jan 15 & return blank Jan 17 Change red Feb 1 & return blank Feb 3 Change red June 1 & return blank June 3
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1 B1 C1 D1 E1
Inspection Date Weeekly Due Bi-WeeklyDue Monthly Due 6 Monthly Due
January 1 2013 Change red Jan 8 & return blank Jan 10 Change red Jan 15 & return blank Jan 17 Change red Feb 1 & return blank Feb 3 Change red June 1 & return blank June 3
In my worksheet I have 'Column A' and 'Column B', In 'Column A' are product I.D. numbers. In 'Column B' is a text description of the product, whose I.D. number is in 'Column A,' and should also contain the I.D. number from 'Column A' somewhere in the midst of the descriptive text. However, some of these in 'Column B' do not.
I need to create a function that looks for the value in 'Column A' and determines whether or not it is present in the text of 'Column B'. Therefore, spitting the answer out in 'Column C' so that I can copy it down for 100,000 cells.