When I run it the message "could not detect range" comes up. I selected my desired range then ran the macro and did not get the desired results. It looked like maybe only one row was deleted. My data has seemingly random blank rows between it, some small row ranges, some very large.
View 2 RepliesI need to detect blank rows and then delete them but for the formula not be be affected
In the example attached there are 4 components but i may only need to use 3 so row 4 would be blank
i need to find the blank rows and delete them and for the formula in cells G12:H14 to be update as necessary
at the moment if i delete the rows i get a REF# in place of the cell which has been deleted
i have tried this on a simple formula and when you delete a row the formula changes as required
I need a Macro to do the following:
In column A I have a list of Acronyms from A2:A90000 and more
In column B I have the corresponding acronyms spelt out from B2:B90000 and more
When I run the macro, it shoud detect the multiple/duplicate Acronyms and it's corresponding descriptions, DELETE the multiples/duplicates and move the cells up.
I have two worksheets that directly link a range of cells on both sheets, ie: Output!a1 = Database!a1.
In this case, the Database sheet contains data that I want to manipulate by deleting entries that are defined in rows. however, when I delete one of the source rows I get a #REF error on the Output sheet.
Is there any way to avoid this so the entries will automatically shift down a row if a row has been deleted? :o
So if i were to delete row two on the source page and the data from row three moves down, that would, in turn, cause the row three data on the output page to move down one row as well.
After performing several operations and sorting the results I end up with a lot if #VALUE! errors in colum B. I would like to search thru those results and delete any row containg "VALUE! in colum B
View 2 Replies View RelatedI have some code that is working great except that it throws up an error on the last run through because it doesn't find any more rows to delete. I've tried "On Error GoTo" but it doesn't catch it. It seemed to work on my home computer which is running Excel 2010 but then on Excel 2007 I get the debug screen and I don't want that to show up for other users that I share the code with.
Sub DeleteHeaders()
Dim lastrow As Integer
lastrow = ActiveSheet.Cells(Rows.Count, "A").End(xlUp).row
[Code]....
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
View 3 Replies View RelatedI'm attempting to write an OutLook 2007 macro that extracts excel spreadsheets from incoming email and saves them as a .csv file. Before saving the file I need to delete the header row. I am getting a "Error 1004 - Delete method of range class failed" error when running this code.
Here is the code: (the bolded line is where I'm getting the error)
Public Sub ConvertToCsv2()
Dim xls As Excel.Application
Dim oWB As Excel.Workbook
Dim tmp As String
Dim ws As Excel.Worksheet
[code]....
I am currently using the following macro to input a formula into my worksheet:
View 12 Replies View RelatedI need a macro to delete a specific range of rows. For example below:
UK
Manchester
London
Chelsea
Birmingham
[Code]....
Each line represents a row. If a cell matches "JAPAN" then the macro needs to delete all the rows relating to it (in this case all the cities that are based in Japan). So after running the macro my list will have:
UK
Manchester
London
Chelsea
Birmingham
[Code]....
I am trying to do the following with VBA.
What i need is to find out the last cell with data and then selecting the whole range and copying it.
Please see the below.
As you can see, the column with the "longest" data range is B9,C9,D9,E9.
I need a VBA code to detect which Column has the longest Data and from there copy the entire range.
Hence, in this case, the range to be copied is From A2:J9.
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
1
2
ttt
rrr
m
vvv
gg
ff
fff
fff
fff
[Code] ..........
Hence,in this case, the range to be copied is From A2 to J14.
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
1
2
hjhjh
ghj
gh
ghj
ghj
ghj
[Code] ..........
I've got a code that generates some worksheets in a fairly large workbook. The code is run monthly and replaces the already existing worksheets.
The problem is that each newly generated worksheets contains more than 1 million rows, which means that the size of each worksheet is around 5MB.
I need a code which allows me to delete all blank rows starting with row 1000 in those worksheets.
I have a named range and I want to delete the rows which have zero value in the named range.
View 6 Replies View RelatedI have a large workseet that I want to Delete all rows where value in column Q is > 9.99 and < 60.00. So the only rows left would be where column Q value is < 9.99 and > 59.99. (deleting out the middle amounts) I think this might be a nested If stmt but have not figured it out so I'm not sure if there is another way.
View 4 Replies View RelatedI am trying to delete all the empty rows in a range. What I currently have deletes the rows but skips over a lot as the code runs. Below is what I currently have.
Code:
'msgbox delete blanks???
If MsgBox("Are you sure you want to delete ALL the blank rows in the chart?", vbYesNo, "Delete Blanks?") = vbNo Then
Exit Sub
[Code].....
On sheet2 Range L4:L2000 I have starting dates entered in mm/dd/yy format. On sheet2 Range M4:M2000 I have finish dates entered in mm/dd/yy format.
On sheet3 I have a numeric value of mmddyy (no brackets) in cell BC4.
What i'm looking to do is if the numeric value on sheet3 BC4 does not fall between the start and finish dates on sheet2, then the entire row should be deleted. Can this be done with the different date formats (Brackets vs no brackets)
I have read all the tutorials and examples of how to delete rows IF the row contains no data within a worksheet or workbook.
I don't want all rows deleted, just rows within a set range.
I can't find any reference to deleting blank rows within a range, just the entire workbook or worksheet.
I need some assistance with a simple macro. Im clueless when it comes to macros.
Heres what I have:
column "e" contains the year built for homes. Some of the fields contain "9999" or "0000" or blank. I need to delete these entire rows. If the year is between 1900 and 2020 I would consider it valid and keep the row.
So I need a macro that says something like this:
if column "e" is not between 1900 and 2020 delete the entire row.
I need to delete a certain range of Rows in a single column
View 3 Replies View RelatedI currently had to start from scratch as my formula kept raising the debug screen. I know the answer is simple but I cant figure out what it is. I have column A, rows 9 through 1000 with data. I want to delete the entire row of any "x" value present in column A rows 9 through 1000. I am new to VBA. So simple is good.
View 2 Replies View RelatedI am not sure of the VBA code to delete enitre row if a cell is empty only within a range, then Ascend according to that Row's Values and show the
Rank No's only on what Rows that remain.
The end result example is in Sheet2
I want to delete all the rows with values between -1 and 1 in column 'I'. I currently set up a macro to do the formatting and conditional stuff that highlights all values above 1 and below -1 - these are the values I need to conduct my analysis on, but I can't figure out how to delete the rows in between. The worksheet has approximately 5,000 rows (and growing) and this would help me clean up the data significantly.
View 7 Replies View RelatedI have a range that has been formatted as a table. Once I've applied a filter, if I try to select all of the rows, and delete the visible rows the option is greyed out.
Is there no way, short of vba, that I can just simply delete the visible rows?
I need a VBA to delete rows with blank cells within columns F - AZ
Columns A - E contain headers but also need to be deleted if cells in columns F -AZ are blank.
I'm trying to use the code below to copy active sheet into a new workbook and clean some parts of it so it will be ready for next department's data input work. But when it comes to deleting empty rows in it, code gives Run-time error "1004" : Delete method of Range class failed error and it marks the part "Rows(r).Delete"
[Code] .....
I have a need to add or delete rows from a number of known sheet names using a table of variables on another sheet that tell me the start row of the sheet I need to go to and the number of rows I need to either add (ie copy rows and paste / insert these) or delete (delete rows).
There are multiple blocks of data I mey need to amend on each sheet and the values in my table of variables will change on each iteration (ie if I delete rows from the first block on a sheet, the start row for the 2nd block I need to amend will need to be updated in the table of variables before I can edit the 2nd block on that sheet).
I have been able to get the process to work for a single instance (ie one sheet and amendments to the first block of that sheet) but I can't figure out how to create the loop to elegantly move to the next set of variables and repeat the process for the 2nd, 3rd, 4th block etc on the first sheet and then move to the 2nd sheet to repeat the process etc.
Public Sub EditCurrentBlock()
Dim rowcount As Integer
Dim startrow As Integer
Dim endrow As Integer
Dim rowcountBal As Integer
'Dim selSheet As Worksheet (tried to use this to nominate the sheet variable but
' had problems so scrapped it)
'Reconfigure the GP Revenue block.................
I am trying out with a code which checks for cell value as "Select" in column IU and then checks for corresponding column IV for value as "0". Please note that "Select" and "0" are populated by formulas. I need the select "Select" and "0" till the next "Select" occurs in column IU and delete the selected range and continue the process until last non empty cell based on column C.
I have written the below code but it doesn't work.
Code:
Public Sub Test()
Dim nRow As Long
Dim nStart As Long
[Code]....
I could have uploaded the excel file that I am working on but did not find any upload attachment option.
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I've found similar queries on the site, but none seem to handle multiple dates, and my attempts so far have been futile!
Requirement:
I press a button on Sheet1 and am prompted to enter a start date and an end date.
Depending on the dates I enter, all rows on Sheet2 which fall outside the Start/End date range will be deleted.
All dates to be checked against on Sheet2 are in a single column, and all rows are populated, there are no blanks. Dates are in the format dd/mm/yy
1. Remove J,K,N,A Columns,
2. In the last O (TIMESTAMP) column, the date is 14-Jul-09 format change it to 07/14/2009 (this format mm/dd/yyy
3.Filter L column (VAL_INLAKH) Remove all rows from whole sheet which has 0 value
4. Column C (EXPIRY_DT) date format is 24-Sep-09 , "dd-Sep-09" change to "Sep" only
5.Merge Column B,C,D,E (SYMBOL.EXPIRY_DT.STRIKE_PR.OPTION_TYP
respectively )