I have a worksheet with 20,000 plus rows, header=yes, and I need to delete all rows NOT containing the numbers 6600, 6700 or 6800 in column C. I'm currently using the below code which works, but is DOG slow.
Sub TestDeleteRows()
Dim Firstrow As Long Dim LastRow As Long Dim Lrow As Long Dim CalcMode As Long Dim ViewMode As Long
With Application CalcMode = .Calculation .Calculation = xlCalculationManual . ScreenUpdating = False End With
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5 123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
Situation: I would like to compare the information between two worksheets and delete the rows that contain the same data in multiple columns, on a row by row comparison.
IE: I have two worksheets, each have identical row headers, with 5 columns each.
Company Load Date Load Time Load Description Amount ?Report? Store#44 5/14/2009 11:55:41 AM MMBAYO $40.00 WS1 Store#44 5/14/2009 02:34:21 AM SLATOUR $20.00 WS1 Store#45 5/14/2009 01:55:41 AM GCHANDLER $100.00 WS1 Store#46 5/14/2009 11:55:41 AM MMBAYO $40.00 WS1
If column A(Company), B(Load Date), and E(Amount) for record 35 in worksheet one, match the same columns for a record in worksheet two, both records are deleted/highlighted/marked with an x in an additional column/anything.
Alternately, I can combine the data in both worksheets into one large worksheet, if that would make the solution easier. And or adding a column that idenifies which record came from which report.
Basically I have two similar reports; each contain a few rows of transactions that the other does not, I need to separate the matching transactions from the unique transactions, in order to balance the two.
I have tried using the Remove Duplicates function but it saves one of the matching records (they should add an opiton to delete matching records aswell keeping only truly unique records), I dont understand how to work Conditional Formatting to get it to do what I want, I dont know macros, or vlookups.
setup a vba code to find values which were separated by a certain value, thus there would be pairs of numbers sought after. What occured was that the first value is bolded, followed by the second not bolded, this pair would be separated by 75. Now I want to apply the same code, but instead of copying just the two cells which were separated to someone on the current sheet, I would like it to copy the entire row (as there is more data associated with it now) with the same bold/not bolded pairing to a new sheet, called "Numbers". I would imgine it be straight forward, yet I am very new to this and still tinkering.
Here is what Im trying to do: I have a VERY large excel file that has groups of 4 cells, a blank, then another 4, repeating. Kinda like the following:
ExampleCell1 ExampleCell2 ExampleCell3 UID = example
ExampleCell1 ExampleCell2 ExampleCell3
ExampleCell1 ExampleCell2 ExampleCell3 UID = example
That pattern continues for about 3000 lines. However, if you noticed, some of the "groups" dont have the 4th line "UID = example".
Here is what Im trying to do. I want excel to search for the cells with "UID" and DELETE it plus the 3 rows above. So that only the "groups" without the UID remain.
Now Im thinking this may be impossible, but I've seen some crazy things done with excel macros and was really hoping someone can help me out. Otherwise Im doing this manually for 3000+ lines of text.
Delete the entire row where any cell in that row is equal to cell "b15" in worksheet "Metal Type". I would like it to run across all the worksheets hidden or unhidden, in the workbook, (except for worksheet "Metal Type").
If possible I would also like it to prompt the user to accept the contents of cell "b15" in worksheet "Metal Type" or enter a new string.
Also can it alert the user when "no matches were found"
I have a need to call a sheet from another sheet, copy two pages from the newly opened, existing sheet to a new workbook, search one sheet of the new workbook for any entries that don't contain a variable I specify, which is the first four digits of the field, and delete them. The sheets represent a daily view of jobs (identified by the "RptDate" variable) and an entire monthly list of jobs, which I want to delete all of them not from the date specified in the variable "RptDate". The fields in column A contain the date in "mmdd" format as the first four digits, and I have that specified in the "B1" celll of the originating workbook.
I found some code in this link Search Column Delete Row If Value Found that looked good. I had to modify it since I needed to search for a variable (RptDate) and needed to search column A and start on row 8 of that column. My current code looks like this:
Sub Macro1()
Dim RptDate As String Dim RptMonth As String Dim iLastRow As Long Dim i As Long RptDate = Range("B1").Text RptMonth = Range("B2").Text Workbooks.Open Filename:=(RptMonth) Sheets( Array(RptDate, "Total Database")).Copy iLastRow = Cells(Rows.Count, "A").End(xlUp).Row For i = iLastRow To 8 Step -1 If Left(Cells(i, "A").Value, 4) <> RptDate Then Rows(i).Delete End If Next i End Sub
It works fine right up to the "Rows(i).Delete" line. It errors out with a "run-time error 1004, delete method of range class failed" and highlights the above line. I know the fields I'm pulling the variables from are working right since it opens the correct workbook off of one of them.
I've got two workbooks, Workbook1 with a list in column a and Workbook2 with a list in column F. I want to compare the cells in these columns and delete the entire row in Workbook2 if there is a match.
I have a spreadsheet that contains two input tables: Parallel and Perpendicular. Next, the user can select a group which a certain entry belongs to. Now what I want is a "summary" of these entries in a table that has no blank rows and combines both Parallel and Perpendicular entries by the Group. Please note that there is no fixed number of inputs for any one group i-e the solution has to be dynamic.The groups are numbered from 1 to 6 and number of groups is fixed i-e 6.
A sample file illustrating the inputs and required output is attached.
I have a pivot like the one above. I want to keep only the rows if "bar' falls within a range. So in a certain range (say d2:d7) I set the criteria for "bar". Is there a way to tell the table to keep only the rows, if the "bar" value can be found in d2:d7?
I want to read information from the "Mapping" sheet, then find information in the "GLEX" sheet that correspond to the read information, then copy the information that was found in "GLEX" to the "Calc" sheet and add it all together and display the sum in a particular cell in the "Report" sheet.
The "Mapping" sheet is a mapping of information to show what makes up a particular total and where it must be entered in the "Report" sheet. The "GLEX" sheet is the output from a financial system and the source of the information that must be "reformatted" to the "Report" sheet. The information is only an extract as the whole totals to around 10MB. I have also deleted the "Report" sheet as it is fairly big on it's own, but the principal will be the same, I think. (If i should upload the "Report" sheet,)
Step 1: "Column A" and "Column B" of "Mapping" are the starting points. The macro must read the values in "Mapping" "Column A" and "Column B" and remember them. Then it must find the row in "GLEX" "Column A" where the information from "Mapping" "Column A" matches and where the information from "Mapping" "Column B" matches with the information from "GLEX" "Column E".
I have a spreadsheet that contains two input tables: Parallel and Perpendicular. Next, the user can select a group (from a drop down) which a certain entry belongs to. Now what I want is a "summary" of these entries in a table that has no blank rows and combines both Parallel and Perpendicular entries by the Group. There is no fixed number of inputs for any one group i-e the solution has to be dynamic.
Attached is a file illustrating the inputs and the required output. I would prefer a formula based approach but not against VBA based suggestions either.
I have two workbooks at the moment, one which holds a whole host of customer and accounts details and another which holds only the customer details. What I'm trying to do is cross reference the two to determine if a customers details appear on both and if they do highlight this, ultimately I'd like it to pull the customers account number back but even if it highlights a match that would be sufficient.
The only unique criteria I have to do this are customer surname and customer postcode.
In the Customer details spreadsheet I'm attempting to enter a formula which will look at the specific surname & postcode held on the row in which it is entered. It will then look at all of the rows on the other spreadsheet and determine whether any of them meet both criteria.
If they do I'd like it to display "match" if they don't I'd like it to display "no match"
This sheet has A:K columns and 1:3212 rows. There are 'page headers' that are in the text file that I want to delete (the text file was exported from an AS400 program). The first row that starts the page header has SA341 in column 1. Each page header has 5 rows. I used this code from one of the other threads on deleting rows, but I obviously do not understand the code as it deleted all rows that contained SA341. Sub DeleteRows() Column_To_Check = 1 Start_Row = 1 End_Row = ActiveSheet. Cells(Rows.Count, Column_To_Check).End(xlUp).Row MsgBox End_Row Search_String = "SA341" For Row_Counter = End_Row To Start_Row Step -1 If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value < SA341 > Search_String Then ActiveSheet.Rows(Row_Counter).Delete
delete rows if two conditions are met .THe sample data looks as shown below:
I need to check for a given resource where the allocation hours are highest against which project , and then delete the rest of the rows for that resource records.If the Allocation hours are the same , then the priority column should be considered the highest priority should be included and the rest to be deleted.And if the priority is also the same then need just one record to remain rest of the rows to be deleted.I have priority of business area ranging from
I have the following table, which starts in Column A, row 2. I would like to have a macro, that deletes some rows after certain criteria. If Column F = SO normal and Column E = aa, bb, cc, dd, ee, ff then delete the whole row.
I have an excel 2007 file, which is quite big: ~10mb. There are situated plenty of columns with coordinates. I would like to transcribe it, modify those data, but it will take me ages. I'm not acquainted with macros, but I heard that people can do with them everything using computers' abilities. I'll abridge my whole problem.
I give you a sample of that file, so please open it. In the file you can see two 'columns'. Every column has two other columns called x and y. As you are thinking now these two columns are containing arguments (in x column) and their values (in column y). Every third column is empty. In attached file you see, that arguments are repeating and values are increasing by one. Sometimes there is an argument without repeats, and sometimes there are only two repeating arguments.
What I wanted to do is delete those repeating arguments leaving arguments with the highest and the lowest value. Example: Please look at range A230:B232. There are three repeating arguments and for this case I should delete row 231 from columns A&B and then move cells up to join separated columns. There are also not repeating arguments, which I need to double. If there will be only two repeating arguments I would like leave them. In the end I should have a clear view for all those coordinates.
i have several student ID results that have conditional formatting in place. I'd like to KEEP the following data but delete/hide everything else:
1) Filter out purple rows 2) WITH filtered rows: KEEP any scoreA that's 100% or less than 85% 3) Look at Score A and Score B - KEEP if the difference is greater/less than 5% 4) If a student took testB but didnt take testA, KEEP.
I am looking for a macro to delete rows that DO NOT contain criteria. But what I could achieve so far is deleting all rows except the first word ie ACC here. My code so far is as follows
I have a sheet with say 1000+ rows that is a QA report of possible mistakes found in a employee rostering tool.
The report finds all occurrences where the staff member only has one coffee break rather than the two they are entitled to. However, on days where they have training, or other half day commitments, on of the coffee breaks is not entered into out tool. This means we are getting a whole lot of entries that we do not require(i.e. one coffee break error).
The tool uses icons but the cells do have a single unique character under each icon type. For example, the coffee break cells have a "T" and training cells have a "&" underneath the icon (without quotes). The staff members day is separated into 15 minute blocks and each block occupies a cell in a column. This means each staff members day spans many columns in a row (i.e. C=8am, D=8:15am, E=8:30am etc...).
What I have been trying to accomplish is to create a macro in VB code that will locate any row with both a "T and a "&" and delete it. This will eliminate occurrences that we are aware of and leave only genuine errors. There are other combination's that I would like to include also such as: "T" "[" "T" "#" "T" "@" "T" "]"
The first row is headers and the first two columns contain team names and staff names which I am trying to exclude (because names contains "T"'s ).
I have spent many hours now looking for example code on Google, this forum and other forums, however most of the examples I have found are looking for two criteria within a column or specific criteria that is not suitable to my application (i.e. values <> certain numbers etc...).
I had a raw data sheet in which i need to prepare a statement just like the attached worksheet.
My requirement is to delete all those rows in the department column except the department which starts with "C" Just like "CNN" & "CNN-IN".
Rows with data containing the words starting with "CNN" should not be deleted .The rows can contain words with "CNN" or "CNN*"(here * denotes anything after the word CNN)
I had just formatted the whole worksheet for easy reference.Actually the raw data is extracted from other program which is very clumsy & irregular.
I have macro code to hide rows based on a certain critera but I don't know how to adapt the code to delete the rows. Basically it checks a column and for every row
I have some data from A1 to A65536, there are few blank rows in between. i want to delete all the rows below the word "test" in that range. that is the word "Test" appears in A37686 that row and all the below Rows till the last row should be deleted.
I have a large spreadsheet that is 65000 rows and colomns A thru W. I need a macro to delete rows that if Date and Account and Type are equal and the net of Quantity is zero delete those rows.
Col A = Date Col C = Account Col D = Type Col J = Quantity
What the macro would do is if an account had 250 rows of activity on say 7/7/2004 (Date) and same type of account and the net of all Quantity is equal to zero delete those rows.
