Delete Duplicate Rows Based On All Columns
Jan 7, 2010How do I delete duplicate rows in a sheet using a macro. When I say duplicate row, it is not based on a particular column but all the columns, so it is a true duplicate record.
View 9 Replies
ADVERTISEMENT
Delete Duplicate Rows Based Only 2 Columns.
Feb 18, 2010I need to filter the following file.
I need to remove all rows where COL A value and COL B value are the same. COL C does not need to be considered. However I need to retain one of the Col C values for purposes of formatting.
The end result should look similar to columns F,G and H!
Delete Duplicate Rows Based On 1 Column
Jun 12, 2008creating a macro for an excel spreadsheet? The problem I am faced with is I need to reduce a xls file from a ticketing system at work that contains roughly 50,000 rows.
What I need to have done is reduce a Site Code column (column B) so that for each ticket entry there is only one occurrence of each user that worked on that ticket.What the macro should do is to look through column B and remove any duplicate rows for the same ticket number located in column A. once the macro gets to the next ticket number in column A I need it to start over on the duplicate check for column B.
I have a attached a xls file to this post to try and show what it is i am working on.
Concat Rows Based On Duplicate Data & Delete
Jun 18, 2009I need to concatenate and de-dupe. I want to find dupes, concatenate a column, and the delete the duplicate columns--all while maintaining data from other populated columns.
Here is the some example data:
#| Type | Name
1 | A | Bob
1 | B | Bob
1 | C | Bob
2 | B | Sally
2 | E | Sally
3 | A | Bill
3 | C | Bill
4 | E | Nancy
The result should look like:
# | Type | Name
1 | A, B, C | Bob
2 | B, E | Sally
3 | A, C | Bill
4 | E | Nancy
I am using Excel 2003.
Delete Duplicate Rows Based On Cell/column Values?
Oct 28, 2009I have a excel file which contains dublicate rows. The duplicate rows can be identified based on few cell/column values. I need a macro to delete the duplicate rows when the below condition is satisfied: let us consider row 5 and row 6:
If column 7,12,13,16,17,18,19,23,24,27,28,29,30 in row 5 = row 6 then row 6 has to be deleted. This condition has to be followed for all other rows in the excel used range. Have attached the sample workbook.
Delete Duplicate Rows Based On Multiple Cell Criteria
Apr 21, 2007I have some VB code, courtesy of OzGrid and Davc4, that works well to delete duplicate rows based on criteria in Column A of the active worksheet (albeit a bit slow on large files).
How do I modify the code below to evaluate duplicate data in Columns A through D? .....
Excel 2010 :: VBA Code To Search Multiple Columns And Delete Any Duplicate Cells (not Rows)
Jun 12, 2014My Excel program (Excel 2010) currently has several columns and each column looks for and pulls data from a specific file on my computer. Then I need to delete any duplicate data entries, count the number of unique entries and track the changes through a chart. I have everything done except I cannot figure out (or find on the internet) a way to search in multiple columns (more than 2) and delete just the duplicate cells. I want to delete the cells in a way where there is one left. For example if the code 12gf is duplicated three time, I want to be left with one 12gf (it doesnt matter what column the original one is left in). Additionally, column length changes and they are not sorted. I have attempted to attach an image of an example file below.
View 14 Replies View RelatedExcel 2010 :: Delete Duplicate Rows Based On Values Of Cells
Jun 17, 2014I'm new to VBA and macros, using Excel 2010, and am trying to figure out how to delete all duplicate rows in a sheet where 2 or less of their values in column A is "1". I'd like have a script that is flexible enough to change to 3 or less if need be. I also have a header row that needs to be offset in the process.
A---B-
0--123 <-delete
0--123 <-delete
0--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
or
A---B-
0--123 <-delete
0--123 <-delete
1--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
Conditional Formatting - Duplicate Rows Based On Multiple Columns?
Apr 8, 2014I'm looking for a Conditional Formatting formula that will check two columns before highlighting the duplicate rows. I need it to be conditional formatting because I know nothing about writing macros or vba (what-ever that is?). Data is entered into Columns A, B, and C. I need to check both column A and C before it highlights the duplicates, based on those two columns. (The format only unique or duplicate values checks only one column.) I have attached an example, but this is just an example, as I have hundreds of lines to go through on the original. (For this example, Row 2 and Row 7 are the duplicates I need highlighted.)
View 3 Replies View RelatedFinding Duplicate Rows Based On Values In Multiple Columns?
Mar 28, 2014I have a data set which has 6 columns (and lots of rows). Every row is different but I want to aggregate them based on 4 fields and then find the average of the numerical column for the results. I basically want to Group based on 4 fields and find the average of the 5th field.
My initial approach was to introduce a column which is a combination of the 4 fields I want to group by, simply in the Excel file (=A2&B2&C2&D2) and then find duplicates of that. I have a solution for this in VBA but when importing new data sets in this method is very slow, so I want to be able to do the whole thing in VBA.
Delete Rows Based On Two Columns
Dec 22, 2006I have a spreadsheet that in column A has either the letters "C", "LP", or is blank.
In Column L it has either numbers 1 through 100, or the letter "D".
What I need it to do is to check and see if the data in column L is "D" and in the same row column A is blank, then delete that row.
Also, if the data in Column L is "D" and the Data in column A is either "C", or "LP", then I need it to change the "D" to "1".
It might be easier to do it separately because once you run the part that deletes the rows that don’t have a “C” or “LP” then I could probably just do one that says if column L = “D” then change to “1”.
Lets see if I can simplify this for you.
If Column L = “D” and Column A = BLANK then Delete Row
(this would delete all “D’s” that don’t have the “C” or “LP”)
THEN
If Column L = “D” then change to “1”
Delete Duplicate Rows :: Duplicate Company Names
Dec 11, 2008I have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
Attached is a sample of that spreadsheet.
Delete Duplicate Cells Or Rows With A Duplicate Cell
Nov 1, 2007I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
Delete Rows Based On Data From Two Columns?
Sep 21, 2012two things on the attached sheet.
First problem: in column B, I have a formula based on contents of column A. However, the limitations of 7 nested IFs leaves me with errors - I need 3 more IFs. Is there a way around that?
Second problem: I need to show the row of the first (earliest time in column A) and the last (latest hour in column A) record for each name. I've been sorting by name and time, then manually deleteing the rows I don't need. I know there's a better way, but I can't find it!
Delete Rows Based On Data In Two Columns
Mar 18, 2014I have a spreadsheet with hundreds of rows. Columns C and D contain either TRUE or FALSE. I want to be able to automatically delete the rows where both columns are FALSE.
View 1 Replies View RelatedDelete Rows Based On Duplicates In X Columns
May 14, 2006I've been looking through various forums looking for a macro for a particular task, but I have not found something that works yet. Maybe someone could help me out? It's pretty straightforward situation.
I need a macro that removes an entire row when: information in column B and column C are both found in other rows ( duplicates).
I'm dealing with a worksheet with store record information ... Store Name (column B), Street Name (column C), State/Province, etc. I import new store records all the time and many are invalid because they share the same name and street address and therefore need to be removed. The ones that I’ve played with unfortunately end up deleting the cells only and not the entire row.
It's a tedious process to do manually remove entire rows (for duplicate column B&C) when dealing with thousands of rows and I would very much appreciate any assistance or insight into how simplify the process with a macro. I've attached a sample of what I'm working with.
Delete Duplicates Rows Based On 2 Columns
Dec 6, 2006I want to delete the current row if the data on row A and Row B match. Its hard to explain so I posted an example.
View 5 Replies View RelatedSum Duplicate Values Then Delete Duplicate Rows
Jan 5, 2004I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
Sum Duplicate Values Then Delete Duplicate Rows
Jan 5, 2004I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
Delete Columns And Rows Based On Cell Fill Color
Jan 31, 2014I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
Remove Empty Rows Based On Range Of Columns If Columns Are All Empty (no Data) Delete
Oct 24, 2012Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
Consolidate Matching Rows And Delete Duplicate Rows?
Feb 20, 2008I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
Consolidate Matching Rows And Delete Duplicate Rows
Feb 20, 2008I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5
123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
VBA To Delete Duplicate Rows?
Aug 18, 2012VBA code that will delete all the rows where cell "C" is duplicated
I have look on the net and there is loads of complicated codes out there but I am looking for something fast.
How To Delete Duplicate Rows
Jan 23, 2014I am trying to delete duplicate rows and have had some success using a VBA from MR Excel threads. However, i would like to add multiple sheets to be compared. When i change the vba to use array, the next line fails with error 438, not a supported objectproperty method.....
Here is the code:
Sub CheckWest()
Dim LR As Long, i As Long
With Sheets("west")
LR = .Range("C" & Rows.Count).End(xlUp).Row
For i = LR To 1 Step -1
If IsNumeric(Application.Match(.Range("C" & i).Value, Sheets("Removals").Columns("C"), 0)) Then .Rows(i).Delete
Next i
End With
End Sub
This checks the sheet "removals" column "c", any duplicates found in sheet "west" column "c", row is deleted. I would like to add additional sheets, how to correctly change this line of the VBA?
With Sheets(array("west", "east", "north"))?? I beileive this is what i tried and the next line errored.
How To :: Delete Duplicate Rows?
Mar 21, 2007How would I go about deleting duplicate rows?
I've searched the board already and I couldn't find this.
I have a sheet with different data in each column, song titles, writers, owners and so on.
say this information runs from column A to H down 10,000 rows, occasionally information is duplicated in certain rows, except for column A.
I need to be able to search the sheet and delete any extra rows that are duplicated.
So I'll end up with the exact data in each row only appearing once.
Delete Both Original And Duplicate Rows?
May 25, 2014My worksheet that will have duplicate data inserted into it. Once inserted I need to delete the new duplicate row and the row it duplicated. The attachment is a copy of what the data looks like with the first tab showing what it will look like with inserted data and the second tab is what I want it to look like at the end. I will not need the deleted data again so it does not need to be on a new sheet, that is just for an example. The name of the tabs will also be different so I want to be able to run it on any worksheet. This is the code I am using to find and delete the duplicate but I can't get it to delete the original. I used "First, MI, Last, and DOB" because those are the ones that won't be duplicated where others will. This is a list of about 15,000 entries. There should never be an incident where there is triplicate data but I can't say for sure.
[Code] .....
Attached File : Practice.xlsx‎
Delete Duplicate Rows, With A Twist
Dec 4, 2008I can delete duplicate rows easily enough, but I can't seem to capture a couple variables where I would not want to delete the selected row. There are no headings, all data starts in Row 1.
I start in Row 1 Columns C and D, compare that to Row 3 Columns C and D (Every other row). If it is a duplicate entry in both columns, delete that row and the row below it. Pick up at next row and continue. See attached Excel file (Excel 2003). The rows with fonts colored RED are the only rows from this data that should get deleted.
Delete Duplicate Rows Vb Needs To Run On All Worksheets
Apr 20, 2009Hi i have the below code which runs on deleting duplicate code which i found in an excel manual. I am having some trouble as i want to convert the code so that it will run on all worksheets i have which are numbered such as 1,2,3,4 etc.
This is so it makes the workbook easy maintenance for when deleting or adding worksheets which happens quite regularly.
Delete Rows With Duplicate Values
May 1, 2006I have a spreadsheet with three colums of data. The first column contains
records which have occasional phone number duplication- see blelow:
(555) 000-0000DataA1ValueA1
(555) 000-0000DataA2ValueA2
(555) 555-9770DataA3ValueA3
(555) 555-4464DataA4ValueA4
(555) 555-4464DataA5ValueA5
(555) 555-4720DataA6ValueA6
(555) 555-8823DataA7ValueA7
(555) 555-3834DataA8ValueA8
(555) 555-4125DataA9ValueA9
What I need to do is (somehwhat) automate the process of filtering or
deleting out all rows which have duplicate data in the first column, but not
second or third columns. I'm sure it's been done...I tried the Excel
out-of-the-box.