Delete Duplicate Rows Based On 1 Column
Jun 12, 2008
creating a macro for an excel spreadsheet? The problem I am faced with is I need to reduce a xls file from a ticketing system at work that contains roughly 50,000 rows.
What I need to have done is reduce a Site Code column (column B) so that for each ticket entry there is only one occurrence of each user that worked on that ticket.What the macro should do is to look through column B and remove any duplicate rows for the same ticket number located in column A. once the macro gets to the next ticket number in column A I need it to start over on the duplicate check for column B.
I have a attached a xls file to this post to try and show what it is i am working on.
View 8 Replies
ADVERTISEMENT
Oct 28, 2009
I have a excel file which contains dublicate rows. The duplicate rows can be identified based on few cell/column values. I need a macro to delete the duplicate rows when the below condition is satisfied: let us consider row 5 and row 6:
If column 7,12,13,16,17,18,19,23,24,27,28,29,30 in row 5 = row 6 then row 6 has to be deleted. This condition has to be followed for all other rows in the excel used range. Have attached the sample workbook.
View 5 Replies
View Related
Feb 18, 2010
I need to filter the following file.
I need to remove all rows where COL A value and COL B value are the same. COL C does not need to be considered. However I need to retain one of the Col C values for purposes of formatting.
The end result should look similar to columns F,G and H!
View 2 Replies
View Related
Jan 7, 2010
How do I delete duplicate rows in a sheet using a macro. When I say duplicate row, it is not based on a particular column but all the columns, so it is a true duplicate record.
View 9 Replies
View Related
Dec 8, 2009
I have a sheet where i want to delete duplicate rows where column A and column B combined are equal, i.e. range(Ax:Bx) where x is the current row. I am using the macro below but cant seem to get it working as I keep getting a type mismatch error and Im not sure why.
View 2 Replies
View Related
Jul 28, 2013
with deleting duplicate entries in a spreadsheet that contains two names, a code number and a date. All rows with a duplicate number in column “B” should be deleted. Write a micro code? I have a few thousand of entries that need to be knocked out.
A sample file is attached : Example.xls
View 5 Replies
View Related
Jun 18, 2009
I need to concatenate and de-dupe. I want to find dupes, concatenate a column, and the delete the duplicate columns--all while maintaining data from other populated columns.
Here is the some example data:
#| Type | Name
1 | A | Bob
1 | B | Bob
1 | C | Bob
2 | B | Sally
2 | E | Sally
3 | A | Bill
3 | C | Bill
4 | E | Nancy
The result should look like:
# | Type | Name
1 | A, B, C | Bob
2 | B, E | Sally
3 | A, C | Bill
4 | E | Nancy
I am using Excel 2003.
View 5 Replies
View Related
Jan 13, 2009
I have a spreadsheet that has thousands of rows of data with maybe 6 columns.
I would like to remove the duplicate rows but the problem I am facing is that I would like to use column A as the criteria.
There are some duplicates in column A but the issue is that the data in column B, C, D, etc may not be the same for each duplicate.
Easier to see in this image:
http://img127.imageshack.us/img127/6364/datajv6.jpg
So A1 is the same as A6
A1 has data in B1 and C1, no data in D1
A6 has data in B1, C1 and D1
I need to delete either row A1 or row A6, it is irrelevant which row it is but one of them has to go.
View 2 Replies
View Related
Apr 21, 2007
I have some VB code, courtesy of OzGrid and Davc4, that works well to delete duplicate rows based on criteria in Column A of the active worksheet (albeit a bit slow on large files).
How do I modify the code below to evaluate duplicate data in Columns A through D? .....
View 7 Replies
View Related
Feb 23, 2012
I have a set of data I'm trying to clean up. I'd like some code that would look at column A, and if a duplicate is found in A, delete the duplicates entire row. Column A contains a unique identifier code.
View 9 Replies
View Related
Jun 17, 2014
I'm new to VBA and macros, using Excel 2010, and am trying to figure out how to delete all duplicate rows in a sheet where 2 or less of their values in column A is "1". I'd like have a script that is flexible enough to change to 3 or less if need be. I also have a header row that needs to be offset in the process.
A---B-
0--123 <-delete
0--123 <-delete
0--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
or
A---B-
0--123 <-delete
0--123 <-delete
1--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
View 5 Replies
View Related
Feb 6, 2010
I have a worksheet with two columns and a few hundred lines. One has titles and the other integers indicating how many times the title needs to be copied to another worksheet or text file.
Existing Worksheet (Input)
TitleA1
TitleB6
TitleC4
TitleD3
Desired Output (Worksheet or Text File) [The entire row, including the integer could be copied as well, if it is easier.]
TitleA
TitleB
TitleB
TitleB
TitleB
TitleB
TitleB
TitleC
TitleC
TitleC
TitleC
TitleD
TitleD
TitleD
View 7 Replies
View Related
Feb 6, 2010
I need a VBA/macro very similar to several I have seen posted here. I have a worksheet with two columns and a few hundred lines. One has titles and the other integers indicating how many times the title needs to be copied to another worksheet or text file.
Existing Worksheet (Input)
TitleA1
TitleB6
TitleC4
TitleD3
Desired Output (Worksheet or Text File) [The entire row, including the integer could be copied as well, if it is easier.]
TitleA
TitleB
TitleB
TitleB
TitleB
TitleB
TitleB..............
View 2 Replies
View Related
Aug 23, 2007
I need VBA help. I know how to highlight every other row but what I can't do is highlight a row if column values are the same. For example I have 5 columns but only the first one has the data I'm interested in. If the data in the first column looks something like this:
1
2
3
4
4
5
5
5
6
6
6
7
.
.
I want to highlight every other row that has similar values therefore I want to highlight row 2, both row 4s, and three 6s...etc.
I also want it to start on the 2nd row of every page until the last row of every page which is row 37 in my case.
View 9 Replies
View Related
Apr 6, 2012
I have to create 1000 dynamic ranges and do not want to do this manually. See the list below for the syntax I am using, I am only showing the first 10.
Name Range
KPI_01=OFFSET(Date,0,1)
KPI_02=OFFSET(Date,0,2)
KPI_03=OFFSET(Date,0,3)
KPI_04=OFFSET(Date,0,4)
KPI_05=OFFSET(Date,0,5)
KPI_06=OFFSET(Date,0,6)
KPI_07=OFFSET(Date,0,7)
KPI_08=OFFSET(Date,0,8)
KPI_09=OFFSET(Date,0,9)
KPI_10=OFFSET(Date,0,10)
I have tried the following code which works to an extent...
Range("=OFFSET(Date,0,1)").Name = "KPI_01"
..but the final result of the named range is an actual range, i.e. "A1:A13".
How can I keep the named range as a dynamic range?
View 5 Replies
View Related
Dec 11, 2008
I have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
Attached is a sample of that spreadsheet.
View 5 Replies
View Related
Nov 1, 2007
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
View 9 Replies
View Related
Jan 5, 2004
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
View 9 Replies
View Related
Jan 5, 2004
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
View 9 Replies
View Related
Mar 2, 2006
I have a report in which I need to delete the entire row for each cell in Column A that has the name "Defacto" in a certain location in that cell. I am trying to use VBA code in conjuction with the "MID" function [i.e., Mid(Cell.Value, 8, 7) = "Defacto"]. This is the code I came up with (but, obviously, it doesn't work):
Sub DeleteRowOnCondition()
Range("A2").Select
Range(ActiveCell, ActiveCell.End(xlDown)).Select
For Each Cell In Selection
If Mid(Cell.Value, 8 , 7) = "Defacto" Then Rows.Delete
Next Cell
End Sub
As well, there is another worksheet in the same report in which I need to delete all the rows that do NOT meet that condition (while retaining the ones that do).
View 9 Replies
View Related
Oct 19, 2007
I would like to Use my Excel VBA program to search each row in a csv document for a name (located in a cell ) if the name exists then I would like to delete the entire row.
Whenever I try to do the above in excel, even when I save in csv format the file formating or something gets changed and the file which has to be procesed through another program then process incorectly.
Is there a way to do what I need while retaining the formating which must obviously be changed when the file is opened in excel?
View 9 Replies
View Related
Mar 12, 2008
The attached picture shows part of an excel file. It contains about 50.000 rows which I want to run a pivot on. The problem is though that the file contains some rows which stop my pivot from running correctly. These data which I mention are in rows 4, 7, 22-25. Seeing as deleting them manually would take me hours and hours I was wondering if there would be a macro which I can run which delete rows automatically. I think it should filter on the following: whenever there is not a numeric value in column A, the entire row should be deleted.
View 6 Replies
View Related
Mar 14, 2008
I want to get a Macro to delete all rows wherever "DELETE" appears in a certain column - I tried using the Delete Entire Row Based on Criteria Macro on Ozgrid but I'm looking for a fully automated solution, rather than the question boxes coming up and asking which cell/criteria to use. The spreadsheets I'm using this on are big, so because this Macro uses filters, it takes a long time and I also need to run this macro on multiple sheets so its not practical to use this.
DELETE is just the word I'm using as the TRUE statement generated from an IF formula that I'm using to compare cells in adjacent rows ie =IF(AND(E2=E3,G2=G3,Q2=Q3),"DELETE",FALSE) - Its completely fine for me to copy/paste values of this formula first and then sort the column so that all cells containing DELETE will appear at the top of the column if that helps. Any ideas on how I could get a Macro to delete those rows at this stage?
View 9 Replies
View Related
May 10, 2008
modifying the following from deleting rows older than 365 days to delete rows older than 12 months. So I can keep a rolling year by month.
Sub DeleteOldSR()
Dim x As Long
Dim iCol As Integer
Application. ScreenUpdating = False
iCol = 7 'Filter on column G (Create Date)
For x = Cells(Cells.Rows.Count, iCol).End(xlUp).Row To 2 Step -1
s = Cells(x, 3).Value
If s Like "Closed" Or s Like "Closed w/o Customer Confirm" Then
If Cells(x, iCol).Value < (Date - 365) Then
Cells(x, iCol).EntireRow.Delete
End If
End If
Next
Application.ScreenUpdating = True
End Sub
I tried modifying the IF statement using month with the following but it seems to delete all months < and is not year dependant.
If Month(Cells(x, iCol).Value) < Month(Date) - 12 Then
View 6 Replies
View Related
Nov 29, 2006
How can I delete an entire row based on seperate column data? Example: I want Excel to look at cell A2 and cell E2. If the values are the same I want Excel to delete row 2.
View 4 Replies
View Related
Jun 23, 2014
I am building a template ("Table") that will import data from 4 other spreadsheets and then format the data once its all in the template. I need to delete all rows where a name didn't import. The names are landing in column B (starting with B22), so I set up my code using an active cell loop macro to examine each cell to see if it was empty, and then to delete the row if it were. I've tried 4-5 iterations of code but nothing is working correctly.
Apparently when the fields are copied over from the other spreadsheets, some empty cells actually have something in them such that they are not completely blank. What syntax I can use so that I capture every instance of a blank/empty cell and delete that corresponding row? Some of the code I've tried is below.
[Code] .....
View 3 Replies
View Related
Jul 7, 2009
I've attached a dummy worksheet that shows constant values of 1.00 in columns D and E. In the actual workbook, user action will sometimes cause these values to change to something other that 1.00. The user may wish to delete the action that caused the change.
I need a macro that will search from the last cell in column D upward to the first instance of a cell that is not equal to 1.00 and select that cell and those immediately above with the same value as the first found cell.
For example, in the attached worksheet the search would start in the last cell of Columd D and search upward. It would find cell D23 and upward to D19. These entire rows would be deleted.
View 5 Replies
View Related
Jun 6, 2007
I'm trying to use VBA code to delete certain rows based on a couple of criteria as follows:
1) If column header is "TERMINAL NAME" and the cell value in that column is "BONDDESK", I need the entire row deleted.
2) Similiarly, if the column header is "PRODUCT TYPE" and the cell value in that column is "CORP", that entire row needs deleted as well.
The information is coming from another source, so the columns may change from day to day, i.e, "TERMINAL NAME" may be in Column L one day but in Column O another day.....
View 6 Replies
View Related
Feb 20, 2008
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
View 4 Replies
View Related
Feb 20, 2008
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5
123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
View 2 Replies
View Related
