I have some VB code, courtesy of OzGrid and Davc4, that works well to delete duplicate rows based on criteria in Column A of the active worksheet (albeit a bit slow on large files).
How do I modify the code below to evaluate duplicate data in Columns A through D? .....
A macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.
Extract Rec1.xlsx
I need a macro to delete old data from a large selection of data, in order to keep the size down.
What I want this macro to do is
Check all rows from 5 downwards.
If A5 (date) is less than cell $B$1 AND B5 is not equal to C5 then delete the whole row.
Continue until reaching the bottom.
I have a Macro that I use daily on a spreadsheet I get with raw line-item transaction data on it. Basically, it deletes columns I don't need to look at, applies column headers, deletes certain rows that I don't need to look at, applies an auto-filter and filters to the first group of data I need to look at, and puts a subtotal on a couple of columns at the top so I can see totals on filtered results.
I need an additional function in this Macro. At some point in the middle of the actions above, I need to evaluate all rows and delete those that are 'opposites' based on a couple of criteria. Basically, I need to delete any transactions that have been refunded in their entirety, because for my purposes those are zeroed out and I don't want to see them....
I have a excel file which contains dublicate rows. The duplicate rows can be identified based on few cell/column values. I need a macro to delete the duplicate rows when the below condition is satisfied: let us consider row 5 and row 6:
If column 7,12,13,16,17,18,19,23,24,27,28,29,30 in row 5 = row 6 then row 6 has to be deleted. This condition has to be followed for all other rows in the excel used range. Have attached the sample workbook.
I got 2 sheets one with Employees name in col A number of hours worked in col B. Second sheet is download form time clock which has Name in Col A and Hours worked in Col B and other details in other columns. I want MACRO to delete matching rows depend on Col A and Col B .
View 9 Replies View RelatedI have a spreadsheet that has thousands of rows of data with maybe 6 columns.
I would like to remove the duplicate rows but the problem I am facing is that I would like to use column A as the criteria.
There are some duplicates in column A but the issue is that the data in column B, C, D, etc may not be the same for each duplicate.
Easier to see in this image:
http://img127.imageshack.us/img127/6364/datajv6.jpg
So A1 is the same as A6
A1 has data in B1 and C1, no data in D1
A6 has data in B1, C1 and D1
I need to delete either row A1 or row A6, it is irrelevant which row it is but one of them has to go.
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
Here is the problem: i have two conditions to satisfy first is data from column A and second is data from column C, what i wanted to do is if both data from column A and B has the same other data in column A and C then sum the total in column D, F, I retain data for column B, E, G and H. Then delete the duplicate rows. By the way we also need to replace the remove the text (W1,W2,W3,W4 and W5) in column C.
View 6 Replies View RelatedI need to filter the following file.
I need to remove all rows where COL A value and COL B value are the same. COL C does not need to be considered. However I need to retain one of the Col C values for purposes of formatting.
The end result should look similar to columns F,G and H!
How do I delete duplicate rows in a sheet using a macro. When I say duplicate row, it is not based on a particular column but all the columns, so it is a true duplicate record.
View 9 Replies View Relatedcreating a macro for an excel spreadsheet? The problem I am faced with is I need to reduce a xls file from a ticketing system at work that contains roughly 50,000 rows.
What I need to have done is reduce a Site Code column (column B) so that for each ticket entry there is only one occurrence of each user that worked on that ticket.What the macro should do is to look through column B and remove any duplicate rows for the same ticket number located in column A. once the macro gets to the next ticket number in column A I need it to start over on the duplicate check for column B.
I have a attached a xls file to this post to try and show what it is i am working on.
I need to concatenate and de-dupe. I want to find dupes, concatenate a column, and the delete the duplicate columns--all while maintaining data from other populated columns.
Here is the some example data:
#| Type | Name
1 | A | Bob
1 | B | Bob
1 | C | Bob
2 | B | Sally
2 | E | Sally
3 | A | Bill
3 | C | Bill
4 | E | Nancy
The result should look like:
# | Type | Name
1 | A, B, C | Bob
2 | B, E | Sally
3 | A, C | Bill
4 | E | Nancy
I am using Excel 2003.
I'm new to VBA and macros, using Excel 2010, and am trying to figure out how to delete all duplicate rows in a sheet where 2 or less of their values in column A is "1". I'd like have a script that is flexible enough to change to 3 or less if need be. I also have a header row that needs to be offset in the process.
A---B-
0--123 <-delete
0--123 <-delete
0--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
or
A---B-
0--123 <-delete
0--123 <-delete
1--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
My Excel program (Excel 2010) currently has several columns and each column looks for and pulls data from a specific file on my computer. Then I need to delete any duplicate data entries, count the number of unique entries and track the changes through a chart. I have everything done except I cannot figure out (or find on the internet) a way to search in multiple columns (more than 2) and delete just the duplicate cells. I want to delete the cells in a way where there is one left. For example if the code 12gf is duplicated three time, I want to be left with one 12gf (it doesnt matter what column the original one is left in). Additionally, column length changes and they are not sorted. I have attempted to attach an image of an example file below.
View 14 Replies View RelatedNeed to create a macro?
Delete rows where multiple column meets multiple criteria.
detail:
delete rows where
Column H is less than 10000
AND
Column C is empty(blank)
Those 2 criteria have to occur at the same time..
I have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.
I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).
For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?
Excel 2010 ABC1Personnel NumberAmountWage Type212345678550Payment312345678400Overtime412345678300Overtime512345678250
Payment612345678750Vacation798765432800Salary898765432250
Payment998765432100Overtime1098765432450Salary1198765432300Overtime
Sheet1
Excel 2010 ABC1Personnel NumberTotal SalaryTotal Overtime212345678398765432
Sheet2
i have several student ID results that have conditional formatting in place. I'd like to KEEP the following data but delete/hide everything else:
1) Filter out purple rows
2) WITH filtered rows: KEEP any scoreA that's 100% or less than 85%
3) Look at Score A and Score B - KEEP if the difference is greater/less than 5%
4) If a student took testB but didnt take testA, KEEP.
I have a sheet with say 1000+ rows that is a QA report of possible mistakes found in a employee rostering tool.
The report finds all occurrences where the staff member only has one coffee break rather than the two they are entitled to. However, on days where they have training, or other half day commitments, on of the coffee breaks is not entered into out tool. This means we are getting a whole lot of entries that we do not require(i.e. one coffee break error).
The tool uses icons but the cells do have a single unique character under each icon type. For example, the coffee break cells have a "T" and training cells have a "&" underneath the icon (without quotes). The staff members day is separated into 15 minute blocks and each block occupies a cell in a column. This means each staff members day spans many columns in a row (i.e. C=8am, D=8:15am, E=8:30am etc...).
What I have been trying to accomplish is to create a macro in VB code that will locate any row with both a "T and a "&" and delete it. This will eliminate occurrences that we are aware of and leave only genuine errors. There are other combination's that I would like to include also such as:
"T" "["
"T" "#"
"T" "@"
"T" "]"
The first row is headers and the first two columns contain team names and staff names which I am trying to exclude (because names contains "T"'s ).
I have spent many hours now looking for example code on Google, this forum and other forums, however most of the examples I have found are looking for two criteria within a column or specific criteria that is not suitable to my application (i.e. values <> certain numbers etc...).
I had a raw data sheet in which i need to prepare a statement just like the attached worksheet.
My requirement is to delete all those rows in the department column except the department which starts with "C" Just like "CNN" & "CNN-IN".
Rows with data containing the words starting with "CNN" should not be deleted .The rows can contain words with "CNN" or "CNN*"(here * denotes anything after the word CNN)
I had just formatted the whole worksheet for easy reference.Actually the raw data is extracted from other program which is very clumsy & irregular.
The department column might be in any column.
Is there a vba code that can delete the entire row based on two criterias? If a row has a location of Canada and is a female, then delete the entire row.
Name Location Gender
Alan Mexico Male
Dick USA Male
Sharon Canada Female <-- This will be deleted if based on criteria
Mike Canada Male
I am a pharmacist that runs reports and I need to sort and exclude data
It is in Excel 2003 format
I run a report that includes a patients name in one column, the medications name in another column and if the medication was withdrawn, wasted, returned or restocked in another column. Withdrawn, wasted, returned or restocked are treated as different functions and each have their own row entry. Patient and medication name are the same in all situations
I need a macro that will look at the patients name and medication name, see if it is the same and delete all rows that have a withdrawal with an associated wasted, returned or restocked.
how they can be used to delete rows that meet multiple criteria, however all the examples I have found seem to be rather complex and personal to the individuals as opposed to being rather generic. Many people, including myself would find it useful to have a simplified generic answer that can be applied to all kinds of criteria. Such as if the data in column B = x and the data in column C = y delete the row. Here is my example.
SCENARIO EXAMPLE:
In column A - Date e.g. 05/02/2011, 06/02/2011
In column B - Day
In column C - Time (in format 09:06:21)
In column D – Service numbers dialled (70, 110, 224) two to three digits long
MACRO EXAMPLE:
Delete the row if the criteria in:
Column D = 10, 40, 192 or 244
And
Column C is between 09:00:00 and 16:00:00
macro code or at least a link to a thread that they think gives a scenario as simple as this.
I am trying to use the code below to eliminate data in a spreadsheet based on certain criteria. I have been able to get this to work with text fields just fine, but now I am running into an issue with numbers. I am trying to get this code to delete rows if they have the word "unknown" in column C and if the value in column B is greater than 900 hours (999:00:00), the numbers in this column are formatted as [hhh]:mm:ss. What should I tweak to make this work?
View 7 Replies View RelatedI have an extremely large CSV file that I am opening via Excel. Can anyone tell me how to delete a row using multiple criteria. For Example, i want to delete the whole row if a certain cell doesnt equal GA SC or NC. I have seen how it can be done using one criteria but not multiple ones.
View 8 Replies View RelatedI have data that covers multiple rows that I need to merge into one row.
Header:| InvoiceNumber | Type | Name
Row1: | 1000 | Payor | Doe, John
Row2: | 1000 | Payor | Smith, Mary
Row3:| 1000 | Payee| Jones, Henry
Row4:| 1000 | Payee | Jones, Bob
I need to get those four example rows down to one row such as:
Header | InvoiceNumber | Payor | Payee
Row1: | 1000 | Doe, John & Smith, Mary | Jones, Henry & Jones, Bob
The number of payor/payee can vary between 1 and several. I need some way to loop through and keep appending the names in one cell separated by a "&". And then deleting all the duplicate rows (based on InvoiceNumber).
I am trying to figure out how to have some VBA look down Column 1 and where the Cell's string value = "GRANDTOTAL", to DELETE that ROW and ALL ROWS below.
Can anyone help me out in writing the Visual Basic code?
few macros/vba that delete rows based on criteria in a cell.
I'm after something a little different. I have a workbook with sheets called Raw Data1, Raw Data2,Raw Data3, Raw Data4 and Raw Data5 and Menu.
There is a column of data in each of the sheets which has a column header of 'Location', however the column where this is located will vary from sheet to sheet. For example in Raw Data1, this is column 'J' and on Raw Data2 it will be column 'M', ( I'm not at work and can't remember the specific column positions for all sheets re: 'Location').
Is it possible to have on the 'Menu' sheet, say in cell B5 a value of 'Locationa' and have rows be deleted in each of the Raw Data that do not match the value in B5?
This sheet has A:K columns and 1:3212 rows. There are 'page headers' that are in the text file that I want to delete (the text file was exported from an AS400 program). The first row that starts the page header has SA341 in column 1. Each page header has 5 rows. I used this code from one of the other threads on deleting rows, but I obviously do not understand the code as it deleted all rows that contained SA341.
Sub DeleteRows()
Column_To_Check = 1
Start_Row = 1
End_Row = ActiveSheet. Cells(Rows.Count, Column_To_Check).End(xlUp).Row
MsgBox End_Row
Search_String = "SA341"
For Row_Counter = End_Row To Start_Row Step -1
If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value < SA341 > Search_String Then
ActiveSheet.Rows(Row_Counter).Delete
End If
Next Row_Counter
End Sub
if in column A in some row is text "today" then delete this row and delete all rows until in row B wont be empty cell. I have start (If in A is "Today" then ... ) but thas's all
View 5 Replies View Related