I'm trying to delete the first blank row down to the last. This is due to the data validations in some columns. All rows with no data should be cleaned and no data validations.
I have some codes here but its not quite a good codes, you see when I run this command, it takes 10 seconds to get it done.
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I would like a macro to search the worksheets for any empty comment boxes and delete them if they contain no text (blank box).
View 5 Replies View RelatedThere are 5 worksheets in a workbook one (Names) has 10 columns,
200 rows, I need to eliminate all blanc cells on this worksheet,
to make a list.
I don't want delete entire row,
only the empty cells in each column.
All rows have data but in different columns.
I Need a macro to delete the empty rows. and the total just after the last row where the data contains. say I have the data from Row 1 to 600 and the total amount in row 1025.
I need a macro to delete the row from 601 to 1024, so that the total amount in 1025 will come in row 601.
I have found the following macro for deleting the empty rows.
Sub DeleteEmptyRows() ....
How do I make a loop to delete a row if the cell A is empty. Example: If cell A3 was empty I want it to delete the row. If cell A4 had data I would like it to skip that row and go on to cell A5.
View 6 Replies View RelatedI am looking for a simple VB code that would delete the contents of cell A if its corresponding (same row) cell B is empty.
View 4 Replies View RelatedI need help writing a macro for a workbook I am creating. I have a report page that needs to be printed, but depending on the input information, sometimes there are blank rows in between the data. For example A1 may have the value 1, and then A2 is blank but A3 has the value 3. I am trying to write a macro that will delete row 2 (as well as other rows which are blank) and then print the report after all blank rows are removed.
View 9 Replies View Relatedi'm trying to tweak Chip's code [url] to include the body of the module as well.
it works, but when there's blank lines in-between modules it'd show less of the modules.
is there a way to delete the empty line in VBE?
or did i miss something out in the code below?
Sub ListProcedures()
Dim VBCodeMod As CodeModule
Dim StartLine As Long
Dim Msg As String
Dim ProcName As String
Set VBCodeMod = ThisWorkbook.VBProject.VBComponents("MyModule").CodeModule
With VBCodeMod
I have the below code :
Private Sub worksheet_change(ByVal target As Range)
Application.EnableEvents = False
finalrow = Cells(65536, 2).End(xlUp).Row
For i = 5 To finalrow
If Cells(i, 2).Value = "1" Then
Range("C3:J3").copy
Cells(i, 3).Select
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
End If
Next i
Application.EnableEvents = True
Application.CutCopyMode = False
End Sub
It baiscally copies row C3:J3 and pastes it in the row range "C:J" depending on where "1" is placed in column B. Code works fine, I want to add another loop in the code which deletes the entire row if the cells in column "B" do not equal "1".
I have columns
Row 1 is heading..
IF Column C doesn't have data in entire column then delete C D E F
IF Column D doesn't have data in entire column then delete D E F
IF Column E doesn't have data in entire column then delete E F
IF Column F doesn't have data in entire column then delete F
Same way for heading NN's
IF Column G doesn't have data in entire column then delete G H I J K L M N
IF Column H doesn't have data in entire column then delete H I J K L M N
IF Column I doesn't have data in entire column then delete I J K L M N
IF Column J doesn't have data in entire column then delete J K L M N
IF Column K doesn't have data in entire column then delete K L M N
IF Column L doesn't have data in entire column then delete L M N
IF Column M doesn't have data in entire column then delete M N
IF Column N doesn't have data in entire column then delete N
I have a formula that does exactly what I need , it fetches negative stocks from sheet 1 , but the formula places the data exactly on the same row where the negative is , thus there are a lot of in between data not required , Yes I can copy paste special values and remove blank rows , but the macro will do it faster
View 13 Replies View RelatedI am trying to delete/select empty cells in Column C.
I tested the code in my work sheet which has close to a million rows. this code for some reason doesnt work. its selecting empty cells from Cell C, that is not working.
When I test it on a new worksheet it worked fine. ?
I have a worksheet of approx 13000 rows and want to use a macro to delete a row if a certain cell is empty - is this possible?
View 3 Replies View RelatedHow do i delete an empy spaces in cell. For example i have this value:
33.1 x 2.9 and i want to have: 33.1x2.9
I have a excel document that I log the cell changes by logging it to a comment block but once the cell is blank I would like to delete the comments the next time it is document is opened. This would have to happen on three sheets. I have an idea for the code but can't seem to get it together.
View 9 Replies View RelatedI am am wanting to delete the entire column if there are no entires below the heading in Row 1.
So in image below, Col C, E & G are to be delete including the heading.
how to write a module that will if check if
if cell A5 has text in it,
check range (b5:t5) for any empty cells or any cells with the word "sp" in it,if there are any empty cell or cells with "sp" delete this sheet.
then check
if cell A8 has text in it,
check range (b8:t8) for any empty cells or any cells with the word "sp" in it,
if there are any empty cell or cells with "sp" delete this sheet.
I have this table and I want to delete all the table rows that are empty. The problem comes in when I am trying to delete the "Table Row" and not the excel entire row. There is data next to my table and I don't wanna mess it up.
This is the code I managed to put togeter
Code:
Sub Delete_Empty_Rows_Table()
Dim i As Variant
Dim varWorkbook As Workbook
For Each i In varWorkbook
Set i = ListObjects.ListRows.Count
[code].....
My project looks like this:
I have a report that starts in column "A" and ends in column "J", I created several formulas in each cell, say, starting with column "K" till column "AA" to retrieve multiple data.
Not all formulas get values, there are many blanks. Longitude of the report is variable.
Now, I copy the content of K:AA and paste values only into new sheet. And that works fine.
Problem starts when I want to delete all empty rows in this new sheet.
Seems like after I paste, cells which I see as empty are in fact not empty, but non of them contains neither values nor formulas.
I tried 8 different ways of deleting emty rows and nothing works. They only delete empty rows above the content that I paste.
I am trying to delete all the empty rows in a range. What I currently have deletes the rows but skips over a lot as the code runs. Below is what I currently have.
Code:
'msgbox delete blanks???
If MsgBox("Are you sure you want to delete ALL the blank rows in the chart?", vbYesNo, "Delete Blanks?") = vbNo Then
Exit Sub
[Code].....
I need a code that I can run that will delete all rows that have nothing in at the bottom of the sheet. What I mean is I will be printing a file and because rows have been deleted that had data in a lot of sheets are being printed and wasted. So what I need is a before close code or something that will actually make the last row with data in the last row!
View 2 Replies View RelatedI have a database and at times I have empty rows. I am trying to write code that looks at the database (it may change daily) and deletes the rows that are empty. The code I've written does NOT work:
Sub emptyrows()
Dim emptyrows As Object
Set emptyrows = Cells(65536, 255)
If Rows = "" Then
Selection.Delete Shift:=xlUp
End If
End Sub
I have workbooks with 100's of worksheets That are all in the same format, a bordered section at the top and a non bordered section below it. Some of the sheets have a blank bordered row at the bottom, and some don't. What I would like is a macro that checks down column A for the last bordered cell, checks if that cell is empty, and if it is delete that single row, so that the non-bordered section of the sheet remains as was. If the cell is not empty, continue to the next sheet.
View 9 Replies View RelatedI have an excel sheet where within my macro i want to delete some rows in the middle of my spreadheet. The number of rows to be deleted can vary so I want to know the code i can insert so it can find the number of rows with data and then delete them.
Currently, i have it working where i go to the top of the data and do End + Down and delete those entire rows. However, the problem is when i only have one row of data then the End + Down goes down to cells i do not want to delete. How can i overcome this?
This is my code to delete the rows:
Range("C40").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.EntireRow.Delete
Range("A1").Select
As mentioned, this does't work if i just have one row of data. The data always starts at row 40 but can be only one row or more rows beneath this.
I've been looking for a couple of hours to try and find VBA to delete entire row if that row contains cells that are empty.
View 5 Replies View RelatedI would like to delete all unwanted rows and colomns. I know this can be done but Old Age is catching the grey matter
I want to delete all except the following ranges, Range("A1:H27").Select
I have read all the tutorials and examples of how to delete rows IF the row contains no data within a worksheet or workbook.
I don't want all rows deleted, just rows within a set range.
I can't find any reference to deleting blank rows within a range, just the entire workbook or worksheet.
