I am trying to delete/select empty cells in Column C.
I tested the code in my work sheet which has close to a million rows. this code for some reason doesnt work. its selecting empty cells from Cell C, that is not working.
When I test it on a new worksheet it worked fine. ?
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
How do I select all the NON EMPTY CELLS in a column?
and
How do I select all the NON EMPTY CELLS in a range?
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies View RelatedThere are 5 worksheets in a workbook one (Names) has 10 columns,
200 rows, I need to eliminate all blanc cells on this worksheet,
to make a list.
I don't want delete entire row,
only the empty cells in each column.
All rows have data but in different columns.
I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
I have this table and I want to delete all the table rows that are empty. The problem comes in when I am trying to delete the "Table Row" and not the excel entire row. There is data next to my table and I don't wanna mess it up.
This is the code I managed to put togeter
Code:
Sub Delete_Empty_Rows_Table()
Dim i As Variant
Dim varWorkbook As Workbook
For Each i In varWorkbook
Set i = ListObjects.ListRows.Count
[code].....
I've been looking for a couple of hours to try and find VBA to delete entire row if that row contains cells that are empty.
View 5 Replies View RelatedI am using the code below in an effort to copy two columns from Worksheet1 ("S:S","T:T") to Worksheet3 ("A:A","B:B"), delete the empty cells and then find the difference between the two values for each row("C:C"). I do not want to create a new column in Worksheet1. The code worked great before adding the SpecialCells code but was slow since it had to also process the blank cells. I am trying to speed it up. The code has an error on line five and I cannot seem to figure out why.
Sub TempDiffok()
Dim wsNew As Worksheet
Set wsNew = Worksheets.Add(After:=Sheets(Sheets.Count))
Sheets("Sheet1").Range("S:S").Copy Destination:=wsNew.Range("A:A")
Sheets("Sheet3").Range("A:A").Select.SpecialCells(xlCellTypeBlanks).Delete Shift:=xlUp
Sheets("Sheet1").Range("T:T").Copy Destination:=Sheets("Sheet3").Range("B:B")
Sheets("Sheet3").Range("B:B").Select.SpecialCells(xlCellTypeBlanks).Delete Shift:=xlUp
Sheets("Sheet3").Range("C2").Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "=RC[-2]-RC[-1]"
Selection.Copy
Columns("C:C").Select.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
True, Transpose:=False
End Sub
The last two lines are from the previous version before adding the ability to delete rows prior to the calculation.
I have a worksheet with data in column A. However, there will always be blank cells throughout this column. I am looking for code that will delete the blank cells (so to speak) and move the below cell with data up one or however many blank cells precede it, hence deleted the blank cell. End result, column A will have no empty cells. The data contained within the cells will be both numerical and text.
View 3 Replies View RelatedI am working with a worksheet that has has 26 columns and about 2000 rows. However, somehow Excel has added tens of thousands of rows and columns to it, all of them empty. I know this is causing some memory trouble but I can't find an easy way to get rid of them. At one point I fixed the problem by selecting the cells I was using and starting a new worksheet, but I don't want to have to do that every day.
View 4 Replies View RelatedI am trying to find a method for deleting empty cells in a range and shift cells left upon deletion automatically. I could do this manually, but with 3000 rows of data it could be a long task. I have attched a small spreadsheet to show what I am looking for.
View 5 Replies View Relatedim having a little trouble writing a macro to :
check if a7:t7 is empty, if so delete a6:t7 and change cell colour of a6:t7 to 'no fill'
I am looking for something that will first delete all empty columns up until it runs into data, then delete all rows that are blank in Column A until it runs into data.
In other words, I recieve different spreadsheets that start their data in different locations and I would like to have them always start in cell A1.
I am looking for a method which would delete empty cells in a row, and then shift the remaining data to the left (filling the cells with data). I know that this could be done manually, but I need it completed for 3000 rows! I have attached a simple sheet to show what I'm Looking for.
View 2 Replies View RelatedI'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
I have data that i import on a daily basis, the data can range from a couple of rows to thousands,
What I need to do using VBA is select the active cells, where cells in row ''G'' is blank then delete the entire row where that cell is.
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
How I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?
Data as shown in present worksheet.
A
B
C
D
[Code]....
What would be some code to select the 1st empty row in a sheet. I need to select entire row. To be easy it could be first empty cell in A, but would like whole row selected.
View 3 Replies View RelatedI have files where empty textboxes have been copied over tens if not hundreds of times, thereby slowing down the scrolling speed immensely.
I would be interested if there was a macro to
a) select all empty text boxes
b) select and delete all empty text boxes
I would like to select rows of a range (eg A7:D11) but only those rows where the cell in column C is not empty
View 5 Replies View Relatedi need a code that will find the first empty cell in column "H" then select go down a row and select upto column "R" so in example range ("H2:R3") would get selected.
I am lost this is all i have so far and it doesn't work
Code:
Worksheets(newname).Range("H" & Rows.Count.End(xlUp).Offset(1) & ":" & "R" & Rows.Count.End(xlUp).Offset(2)).Select
How do I select the next empty cell in a range?
Say I have myrange=Range("B32:B37"), then I want to put values into the next empty cell in that range.
I want to check if I have a value in B32, and if I have, I want excel to go to B33 and print a string there and the same for 34.
How do I code in VBA - I need to select the next empty cell down in a column - ie blank field so that I can transfer the next set of data
create a code such that it will select a cell which is not empty and display the content in that cell. For example , in the attached file below i would expect output to be cells(2,5) = 12 and cells(4,5) = 13
View 2 Replies View Related