I have 2 reports starting col A to W. I want a macro code for the below.
1st Report
1. 1st sort the entire report with col O leaving the headings.
2. 2nd delete the rows if where value of O is "Credit"
3. After the above step sort the entire report again with col H
2nd Report i hvae is also from Col A to AB. I want a macro code for below.
1. 1st sort the entire report with col O leaving the headings.
2. 2nd delete the rows if where value of O is "Credit"
3. 3rd delete the rows if where value of AB os "DEL"
4. After the above step sort the entire report again with col H
I need a macro that searches through column F(amount). If it finds a negative amount(a credit note), it should search through column A(client ID), look for the same client and deduct the amount from the oldest invoice of this client. Then it should delete the whole line of the credit note.
If it doesn't find the same client, it should not adjust anything.
If the negative amount is a cancellation(all records with the invoice number 9999999), it should not adjust anything.
If the amount of the oldest invoice is smaller than the credit note, it should deduct down to 0 and deduct the rest of the credit note from the second oldest invoice.
I have attached a sample file : makro credit note.xlsx‎
I have a database which holds a field for people's credit card numbers. When I try to import them into excel it removes the last number and replaces it with a 0. So if I have credit card number 123456789123456 it will show as 1.23456E+15. Then when i format it as a number is shows as 123456789123450.
I have been trying to write a macro but its getting very complicated and im just getting confused. I need to look through a long list of data and see if there is a comparable figure. e.g if there is £350 at branch A for supplier X, i need to know if there is also a credit of £350 at branch A for the same supplier.. The problem is that the comparable figure could be above or below the original figure. Then i will delete both these lines from the list. I have tried to do this but have got cofused by so many if and else formulas.
where the first term refers to cell immediately above. In other words, this formula takes the prior balance, adds a credit if any, subtracts a debit, if any, and gives a new balance.
The formula worked on the cell I put it in. It will not work when I copy and pasted it into the cell below the first one. Error I get is circular reference.
I have a userform capturing Credit Card Numbers for Visa, Master, Amex and Diners as part of a payment tracking system and would like to check that the entered Card Number is valid before processing the payment through a third-party website to minimize to number of error / invalid card messages.
I suspect there is some kind of checksum built into the cardnr. Any tips on how to check for the validity would be appreciated, including links to relevant sites.
this question is related to an earlier question of mine: [url]
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
Is there a limit on the number of rows and columns that can be deleted in a macro on Excel 2003? I am trying to create a macro that, amoung other things, delets 1119 rows and 54 columns. If I delete the columns first, the rows will not delete. If I delete the columns first, the rows will not delete.
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
I have the following codes to delete all blank rows in column A
Dim lastrow As Long lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row MsgBox lastrow
With Sheet1 For t = 1 To lastrow If Cells(t, 1) = "" Then Rows(t).Delete End If Next t End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5 123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
Need to solve my problem in the thread "Type Mismatch Error Message". Now a new problem has come up in the same code, so - according to the rules - I've started a new thread. (This one is most likely due to my poor knowledge of VBA syntax).
Sub Delete_invalid_rows() Dim i%, j% Dim Nr%, valid As Boolean, BYPdata As Boolean Dim ar1 As Variant Dim ar2 As Variant Dim ar3 As Variant Dim ar4 As Variant Nr = 20 ar1 = Array(11, 14, 19, _ 20, 22, 25, 26, 27, 28, 29, _ 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, _ .................
This sheet has A:K columns and 1:3212 rows. There are 'page headers' that are in the text file that I want to delete (the text file was exported from an AS400 program). The first row that starts the page header has SA341 in column 1. Each page header has 5 rows. I used this code from one of the other threads on deleting rows, but I obviously do not understand the code as it deleted all rows that contained SA341. Sub DeleteRows() Column_To_Check = 1 Start_Row = 1 End_Row = ActiveSheet. Cells(Rows.Count, Column_To_Check).End(xlUp).Row MsgBox End_Row Search_String = "SA341" For Row_Counter = End_Row To Start_Row Step -1 If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value < SA341 > Search_String Then ActiveSheet.Rows(Row_Counter).Delete
I am copying a price list from a worksheet. I currently have a script that deletes unwanted rows (products) but these products' header rows' are left. I also want to delete these text based headers. One solution might be a script that reads a columns cell value in the row(s) below and if values are missing the header row should be deleted.
I would like to write a macro button, in order to lookup through col. "D" and where find same invoice number (invoice number combine with 3 letters plus dash), should sum the corresponding rows' amounts in col."J" into one row and the other row should be deleted.
I have a sheet as shown in the picture below. If the cells in Column N has some values that are the result of some calculations. How ever if there are more than one of it, the entire row has to be deleted.
Eg:The value in Column N 816.323 has 3 rows below each other.Only one has to be there.There can be upto 10 values one after other in this way.
I tried to write a progrma by using loops and cehcking if ther is value in the cell,go to cell below and if there is value,delete the row in a loop of 10 times.But it didnt work
I have a workbook where I import data from another workbook. This might get done several times a month. As I go through the imported data I delete rows not needed which gets place into another worksheet. What I need is when I import data again is a macro that the worksheet where my already deleted rows are and compairs them to the new data imported and if the first 13 columns of data matches it delest them off the imported sheet.
I found some code which I altered at [url]
and posted the same question but haven't got any response as of yet.
So the code that i go works but only if the row matches in the exact order on both sheets so e.g. (if row 1 on sheet1 matches row 1 on sheet2) it works but if (row1 on sheet1 matches row 3 on sheet2) it does not.
Here's the code I have so far.
Public Sub delOLD() Dim i As Long Dim iLastRow As Long Dim ws As Worksheet, ws1 As Worksheet
Set ws = Sheets("Data") ' Imported Data Set ws1 = Sheets("Old Records") ' Deleted Data
I would like a macro to look into the values of column H11 to BG200 and if ALL the cells in the row contains zero, delete the entire row. see attached a short example for clarification.
I wanted to select some criteria based on an AUTOFILTER and then have a macro delete all rows from 2 to the bottom... then SHOWALLDATA pick another set using AUTOFILTER and then having excel repeat and delete everything 2 down... the problem i'm finding of course is that when you AUTOFILTER row number 2 is not always at the top, so I need some relative I think..
I have an excel sheet which has 2800 rows.....The thing is i want to delete a set of rows..consider the following example.....here i need to delete row no 2,6,10....and it continues till 2000......is there a macro to delete the rows....
