I have a sheet as shown in the picture below. If the cells in Column N has some values that are the result of some calculations. How ever if there are more than one of it, the entire row has to be deleted.
Eg:The value in Column N 816.323 has 3 rows below each other.Only one has to be there.There can be upto 10 values one after other in this way.
I tried to write a progrma by using loops and cehcking if ther is value in the cell,go to cell below and if there is value,delete the row in a loop of 10 times.But it didnt work
I'm trying to put together a script which on the sheet "Resource" compares every cell in the range B:U, starting at row 8, and where all cells match, keep the first row, but delete the duplicate proceeding rows.
I've found the code below here: [URL] ...., which I thought I may be able to adapt, but for me to include all the columns in the 'If.Evaluate' section of code seems to perhaps not the most efficient way of doing this.
I need excel to delete entire rows if there are duplicates in two columns combined.
So, if I have this sample data (in reality I have a lot more columns)
1 Tr. ID Last Name First Name Sex 2 RBM_A Miller Johnny M 3 RBM_A Bayron Josephine F 4 RBM_A Jackson Reynaldo M
[Code] ........
I want excel to delete only row 9, not 11, 13 or 14.
So far, if I look for duplicates in both columns it marks duplicates in either one. Also if I delete the duplicates, it deletes them only in those two columns, leaving me with distorted data (in this example, row 14 would have no last or first name, but only the values "RBM_C" in column B and "F" in column E.
Excel Range A1 - D500. Data located in column C. I would like to delete the rows in this spread sheet that do not contain any of the following 3 prefixes of part numbers from column C: X-SXP, X-SCM and X-SBP. There are many part numbers but only parts with these 3 prefixes are needed. Part numbers are 10 characters long after the prefix. If any additional information is needed, let me know.
I viewed the Delete Rows Meeting Conditions thread, but the input value in that code is for what you want to delete, and I need to delete everything not meeting the data I want to keep, which is about 30 different part numbers. Also, that appeared to only offer one input and not 3.
I know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.
I need create a macro to perform the following - I don't know if it needs to be an Excel macro or via VB. This is to speed a process up and eliminate any spreadsheet messing around for our "admin" staff - they are not good with excel at all!
So, I have a daily/weekly down load of a spreadsheet (exported from access).
* I want to copy the values of column AK to A * Then delete all entries in column D that equal 19, 20 and 6 * Then delete all entries in column AL that equal "A","B","C" or "D" but not "E","F" or "G" * Then delete entire rows where the value in column A is a duplicate within the list
I will call this spreadsheet, for the purpose of this exercise, the "Master". I now have another spreadsheet with values in that should relate to values in either (or both) columns A and B in the "Master". I need Spreadsheet 2 values to be highlighted as cross checked in the "Master" and then all those in the "Master" that do not appear in the 2nd S/S will be normal white cells thus showing that they need to be chased by our Admin staff.
I have the following code to delete entire rows where column IV contains "x".
With ThisWorkbook.Sheets("Sheet3") With .Range("IT1", .Range("IV" & Rows.Count).End(xlUp)) .AutoFilter Field:=1, Criteria1:="x" .Offset(1).EntireRow.Delete .AutoFilter End With End With
End Sub [/Code ]
For a reason that I can't see, it is deleting not only the row that contains the "x" (there is never more than one row with an "x" in column IV), but also the row immediately below it.
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
I have the following codes to delete all blank rows in column A
Dim lastrow As Long lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row MsgBox lastrow
With Sheet1 For t = 1 To lastrow If Cells(t, 1) = "" Then Rows(t).Delete End If Next t End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5 123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
Need to solve my problem in the thread "Type Mismatch Error Message". Now a new problem has come up in the same code, so - according to the rules - I've started a new thread. (This one is most likely due to my poor knowledge of VBA syntax).
Sub Delete_invalid_rows() Dim i%, j% Dim Nr%, valid As Boolean, BYPdata As Boolean Dim ar1 As Variant Dim ar2 As Variant Dim ar3 As Variant Dim ar4 As Variant Nr = 20 ar1 = Array(11, 14, 19, _ 20, 22, 25, 26, 27, 28, 29, _ 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, _ .................
This sheet has A:K columns and 1:3212 rows. There are 'page headers' that are in the text file that I want to delete (the text file was exported from an AS400 program). The first row that starts the page header has SA341 in column 1. Each page header has 5 rows. I used this code from one of the other threads on deleting rows, but I obviously do not understand the code as it deleted all rows that contained SA341. Sub DeleteRows() Column_To_Check = 1 Start_Row = 1 End_Row = ActiveSheet. Cells(Rows.Count, Column_To_Check).End(xlUp).Row MsgBox End_Row Search_String = "SA341" For Row_Counter = End_Row To Start_Row Step -1 If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value < SA341 > Search_String Then ActiveSheet.Rows(Row_Counter).Delete
I am copying a price list from a worksheet. I currently have a script that deletes unwanted rows (products) but these products' header rows' are left. I also want to delete these text based headers. One solution might be a script that reads a columns cell value in the row(s) below and if values are missing the header row should be deleted.
I would like to write a macro button, in order to lookup through col. "D" and where find same invoice number (invoice number combine with 3 letters plus dash), should sum the corresponding rows' amounts in col."J" into one row and the other row should be deleted.
I have a workbook where I import data from another workbook. This might get done several times a month. As I go through the imported data I delete rows not needed which gets place into another worksheet. What I need is when I import data again is a macro that the worksheet where my already deleted rows are and compairs them to the new data imported and if the first 13 columns of data matches it delest them off the imported sheet.
I found some code which I altered at [url]
and posted the same question but haven't got any response as of yet.
So the code that i go works but only if the row matches in the exact order on both sheets so e.g. (if row 1 on sheet1 matches row 1 on sheet2) it works but if (row1 on sheet1 matches row 3 on sheet2) it does not.
Here's the code I have so far.
Public Sub delOLD() Dim i As Long Dim iLastRow As Long Dim ws As Worksheet, ws1 As Worksheet
Set ws = Sheets("Data") ' Imported Data Set ws1 = Sheets("Old Records") ' Deleted Data
I've got spreadsheet I use to control the inventory of my user equipment; who has it, what is it, where is it, etc.
I'd like to "lock" multiple consecutive cells of each row so that they never seperate. This is because they need to be together. However, periodically, I need to move, sort, or rearrange the sheet.
Is there a way I can "idiot proof" this so that these cells never come unlocked from each other?
There is no vba involved (primarily because I don't know how), and no other scripting either.
I have a list of projects in several rows and at the column "K" is the status of the project, according to the status of the projects if the status is completed I want cut this entire rows and paste to another sheet calls Projects_Completed by using a macro
After running advanced filtering through VBA like that:
[Code] ........
Excel returns a couple of rows which fit the Criteria. How to display these rows in a textbox in the userform? (all I've managed to display in it is one cell).
I've been tasked with developing a macro that will generate schedules. For background, we're taking a QuickBooks Customer file and exporting it to be picked up by the macro. I've got that part working, but now I need to delete various rows based on certain criteria.
The spreadsheet has a field for Job Status which we use to define whether an account is under contract (2 in QuickBooks), or some other status. Basically what I need to do is delete the entire row of data where JobStatus (Column R) is anything but 2.
I came across this code that selects (and extends) cells between the active cell and the next cell with data.
Is it possible to modify this so that it selects the entire Rows ?
Code: Sub Test() If Selection.Select "" Then Range(Selection, Selection.End(xlDown)).Select Range(Selection, Selection.End(xlToRight)).Select Else Range(Selection, Selection.End(xlToRight)).Select End If End Sub
